Browse

This paper describes the controlled demolition of a reinforced concrete water tower located in an industrial area in Lugoj, Romania. Due to advanced structural degradation and high rehabilitation costs, demolition was selected as the most viable solution. The adopted method combined blasting works with conventional preparatory operations, using a controlled toppling technique in a predefined direction. A detachment wedge was created by drilling and charging 196 boreholes arranged in eight horizontal rows, initiate...

The present study investigates the impact sensitivity of high explosives used for civilian applications, with the primary objective of assessing key safety parameters in accordance with the requirements of Directive 2014/28/EU and the harmonized European Standard SR EN 13631-4:2005. Using a RENAR-accredited methodology (Procedure PI-84), the sensitivity to mechanical shock was determined through a series of standardized drop-weight tests performed with the Soneta BFH 12A impact testing apparatus. The explosive mat...

Explosives are used in a wide range of industrial, military and civil applications, and their behavior under extreme temperature conditions is a key aspect for safety and reliability. The present study analyzes the influence of extreme temperatures on the stability and reactivity of explosive materials, highlighting the critical factors that can lead to degradation, changes in sensitivity or accidental triggering. In the research, experimental methods and numerical modeling were used to evaluate the thermal behavi...

This study presents a comparative analysis of the performance of three gas measurement devices used to detect toxic gases generated by the detonation of ANFO explosive. The study was conducted following the operational procedure PI-102, which complies with the requirements of the SR EN 13631-16:2005 standard for detecting and measuring toxic gases produced by explosions. The aim was to evaluate the accuracy, reliability, and consistency of the devices in monitoring key toxic gases released during detonation. The e...

The paper describes the practical solutions and safety conditions of realizing the demolition of an industrial chimney and a cooling tower located in a former thermal power plant, having in the very close vicinity several civil constructions. The chimney has a height of 208 m and consists of the outer tubular structure of reinforced concrete and as well as of the inner chimney made of refractory brick masonry. The cooling tower height was 108.0 m and the base diameter of 82.00 m. For chimney, the chosen solution o...

The explosions produced in industrial/chemical facilities, such as hazardous material storage facilities, are events with low probability but high destructive potential. When occurring in a densely populated area, such explosions can lead to extensive damage of nearby buildings or infrastructures, resulting in high economic costs and human injuries and fatalities. The explosions may be the result of an accident but may also be intentional. As the pressure released by the external explosions decreases exponentially...

The execution of the blasting works involves the management of the problem of storage of explosive materials. This aspect is easier to solve in the case of mines activities with long exploitation time and where storage capacities are arranged, according to the legislation that provides constructive and safety criteria depending on the type and quantity of explosive materials stored. In the case of isolated blasting works, those for road construction, building demolition, underwater or forestry, etc., storage facil...

The article outlines the practical steps and security requirements for carrying out the destruction of an industrial chimney on a platform housing an oil refinery that is close to critical structures and equipment. The chimney is 150 meters tall and is built out of an interior chimney composed of refractory brick masonry and an exterior tubular structure of reinforced concrete. A risk assessment was conducted with reference to seismic wave, air shock wave, noise, dust, and the amount of shock produced by the conta...

DETEX Electronic Detonator made by Kirlioglu consists of an electronic circuit with communication and microprocessor and wire bridge resistance coated with explosive material. DETEX Electronic Detonator, which identity information, delay information, charge, discharge and all functions are controlled digitally, is a system consisting of all electronic circuit elements. The system consists of a communication circuit, a master control circuit with a microprocessor, a controlled charge, a discharge and an ignition ci...

The storage of explosives and pyrotechnic articles must be carried out in complete safety conditions and only in storage facilities (depots) arranged and authorized for this purpose. The legislation in force has strict provisions on the rules of explosive & pyrotechnics storage, handling and access in the storage facilities. Failure to comply with certain provisions of the law in the product safety data sheet prepared by the manufacturer may lead to the generation of hazardous situations which may result in very s...

Unwanted effects of detonation of explosive materials (explosions) can occur due to deliberate actions (terrorist attack) or accidental. Modelling the effects of the explosion on the environment and the urban neighboring, occupies an important place in global and national research programs for the modernization of techniques for the safe use of explosives, in order to combat and operatively counter accidental explosions or those based on their use for terrorist purposes. The current trends are on the way to approx...

Unlike friable rocks, salt behaves pseudoplastic when blasted, which leads to other premises of the blasting technique compared to those applied for stratified sedimentary or eruptive rocks. Here can also add the salt inhibitory character on the thermodynamic parameters of the explosions, with effects on their efficiencies as well as some particularities of the execution of the blasting works due to the presence of methane gas in the salt mines. The article presents the results of the research carried out in fired...

Explosions caused by accidents or deliberate actions can seriously damage the structural/non-structural elements of a building and endanger the life of occupants. If the explosion occurs at a short distance, structural elements in close proximity may be seriously damaged or even completely removed. Under certain conditions, these local damages spread into the structure and can generate generalized collapse (also called progressive collapse). Progressive collapse, which in many cases causes more victims than the ov...

?Pyrotechnic article? are products that contain explosive substances or an explosive mixture of substances designed to produce heat, sound, light, gas or smoke or a combination of such effects. Depending on the purpose for which they were made, pyrotechnic articles are used for entertainment purposes (fireworks), for the stage including film or television productions as well as for technical purposes. Due to the constituent substances, the pyrotechnic articles have a low or high risk level depending on the type an...

The paper presents the results obtained in the assessment of seismic action of blasting performed in four Romanian salt mines where small room ad square pillar method is applied. Function of the time taken to mine a level, of the size of the rooms in course of excavation, of the medium radius of the area with elastic deformations, and the results of the seismic measurements, the explosive charges possible to be blasted were established for each separate seam, providing in the same time seismic protection for the f...