Browse

Discontinuities such as beddings, faults and joint sets usually have important role in rock slope stability analysis. Indeed, they can change a rock mass to a blocky system. First of all, in the application of different slope stability analysis methods, the blocks must be absolutely determined in geometrical shape and defined in form of polyhedron. A 3D geometrical model of jointed rock mass, including a set of simulated geotechnical blocks, can be generated considering constraints of the model boundaries and geom...

Reservoir fracturing or fissuring is a natural phenomenon and a major factor in many Oil engineering studies. The factors that cause the Reservoir to fracture were analyzed in Tabnak Anticline, in Fars province of Iran using the borehole images information (EMI). A nonlinear simulation and assessment model of reservoir fracturing was established using the artificial neural network (ANN) technology to simulate the structure and function of the neural network (NN) of the human brain with engineering technology. The ...

There are some limitations and constraints in application of algorithms developed to optimize open pit limits. Therefore, it is normal to develop new algorithms to decrease existing limitations and increase their capabilities. In this paper, the key group concept which mainly use for stability slope analysis is used to develop a new algorithm named “KG-PLO” to optimize open pit limits. The KG-PLO is implemented on an especial type of the economic block model of the mining area. The algorithm can present the tr...

The environmental problems arising from ground vibration has been faced and discussed frequently in various industries such as quarry, mining, civil works, shaft, tunneling, pipe line and dam construction etc. where the blasting operations are unavoidable. In bench blast design, not only the technical and economical aspects, such as block size, uniformity and cost, but also the elimination of environmental problems resulting from ground vibration and air blast should be taken into consideration. One of the fundame...

Rising operating costs of truck haulage in deep open-pit mines, have forced them to apply new methods. The most common method is using an in-pit crusher and conveying the ore and/or waste out of the pit .This method has been successfully implemented in several large open-pit mines. In deep mines it may be necessary to move the crusher and reinstall it in new location(s). This paper offers an approach to determine these location(s). The approach is simply to propose various alternatives and calculate related costs ...

Since a very long time ago, men have paid a very especial attention to underground spaces. Stone Age men used to take them as shelters and the contemporary human has applied them in several ways. Caverns are large underground spaces which are excavated in hard rock. Nowadays, engineers’ attention has been drawn to the application of caverns in order to expand the urban areas due to the civil developments and the lack of enough spaces on the surface. On the other hand, caverns have turned to become multi-purpose ...

This paper introduces two methods, one is the element Concentration-perimeter and the other is power spectrum- perimeter method, for separating geochemical anomalies from background based on fractal approach. The variability of the element concentration and power spectrum as a function of perimeter from sample sites reveals two different fractal distributional patterns acting within two scale ranges. Therefore, these methods can be used to effectively separate geochemical anomalous areas from background. We compar...

Advanced mathematical theories like fuzzy set theory play an increasingly important role in exploration and assessment of mineral deposit. A method based on this theory, Fuzzy C-means Clustering, is presented to determine the background of the elements. In the following research, Fuzzy C-means Clustering (FCMC) method is applied to quantify the lithological background in Khouni Mountain, Central Iran. By applying this method, 254 stream sediment samples classified into 4 clusters according to the membership degree...

The purpose of this study has been assessment of capability of Artificial Neural Networks in Gas Lift Operations optimization, which is in use for improved oil recovery from oil wells. This in detail is in fact estimation of the two most important parameters of the process, i.e. optimal injection depth and optimal gas injection rate. For gas lift, gas is injected continuously or intermittently at selected location(s), resulting in a reduction in the natural flowing gradient of the reservoir fluid, and thus reducin...

Within the Risha well field in Eastern Jordan oil and especially gas is produced from the existing traps on the top of the Ordovizium deposits, at a depth of about 2000 m. By more than 30 deep wells oil and gas is produced which contains also a portion of water. Usually this water accompanying the oil production is highly mineralized and originates, according to chemical and stable isotope analyses, most probably from old syn- sedimentary brines or formation water. Usually this water accompanying the oil productio...

Mineral Resource management (MRM) is defined as a holistic view on mining activities at firm levels to optimise the use of these non-renewable resources. In this paper, after reviewing of related terms about MRM such as sustainable development, we combined MRM objectives at firm with government responsibilities on mine sector management, and a new applicable cause and effect framework was proposed. This framework which is based on sustainable development satisfies both of firm objectives and the governmental respo...

In continuous gas lift, gas may be injected continuously or intermittently, depending on the producing characteristics of the well and the arrangement of the gas-lift equipment. Being somehow an ancient tool with an age of over a century, gas lift is though still a challenging problem when overall optimization is the concern. When the injection gas is of a limited supply the problem is finding the best gas allocation scheme. However there are increasingly emerging cases in certain geographic localities where the g...

The North part of Kashmar is located about 250 Km Southwest of Mashhad, Northeast Iran. It is part of the structural Darouneh fault zone and contains rhyolitic, andesitic, pyroclastic and lava flows. Based on results obtained from AFM and Miyashiro diagrams the igneous rocks classified as a subalkaline and calcalkaline. From the data obtained the Kashmar strike-slip fault geometry (distribution of shear fractures such as R,RЛґ,P surfaces, Riedel structures) plays an important role in controlling the location and e...

In this study, blast originated vibrations were monitored around the limestone quarry owned by Konya Cement Factory near Konya city. Since the city limits have been widened and the land around the quarry opened to residential area. The work presented here, concentrates the vibration measurements taken from two different locations for each rock blast by Instantel-Minimate plus equipments. The data obtained were then analyzed by means of Blastware 8.0 software and results were presented here in this paper. The vibra...

In this study, dissolution kinetics of iron leaching by sulphuric acid under atmospheric pressure from Karacam (Eskisehir-Turkey) lateritic ore was studied. The effects on the iron reaching rate of stirring speed, sulphuric acid concentration, temperature, particle size, and solid/liquid ratio were investigated. In order to investigate the effects of leaching temperature range of 40–90 °C the shrinking core model was applied by using the results of experiments. Kinetics analysis showed that the iron dissolution...

Continuously increasing demand for energy resources drives petroleum industry to search in very deep waters, drilling very deep wells, encountering adverse conditions of pressures and temperatures and thus having to resolve a multitude of problems. In many cases, the problems can be attributed to the performance of drilling fluids which then presents challenges to drilling fluid industry. Such problems include poor hole cleaning, high pressure losses, loss circulation zones, fluid gelation, reservoir fluid invasio...

The roof of the tunnel and sidewalls are especially influenced by the tunnels shape and dimension. Rock engineering mostly concentrates the reasons of these disturbances to decide if they are stress induced or discontinuity governing deformations. In this study, it has been concentrated on two shallow tunnels which are 35-90 meters below the ground surface. They were opened in limestone rock mass containing lamination and cavities as well. Electrical resistivity measurements were used to determine the weakness zon...

Electrical resistivity measurements have been used in engineering for many purposes. In this study, blasting effects on the back of blasted holes at a quarry bench have been put under evaluation. Earth resistivity of bench rock, limestone, was measured before and after blasting by electrical resistivity equipment with the same electrode positions. The resultant resistivity graphs demonstrate the blasting performed in this study influence slightly the rock resistivity of the rock mass situated 4 m from the blasted ...

Pillars are key structural columns in underground mining. They are usually made of in situ intact ores and do not have additional reinforcements. Their main function is temporary or permanent support of ore ceiling of rooms during excavation and mining. Coal pillar strength is usually estimated according to empirical formulae obtained from field observations. Todays, numerical models have found increasing use in pillar design. The FLAC3D Software based Mohr-Coulomb Strain Softening (MCSS) failure criterion was use...

Submitted paper describes collector of the quaternary sediments and the simulation of the groundwater in this collector. The interest area is situated to the central part of the North Bohemian Brown Coal Basin in the Czech Republic. There is one of the biggest coals opencast mine called CSA in the Czech Republic. The groundwater flow in the quaternary sediments brings in consequence great stability problem of the upper overburden cuts. We decided to construct the three dimensional geological model of the quaternar...

The North-Western Bohemia region takes a unique position in the history of mining in the Czech Republic. Several ore districts are situated here, the welfare of which influenced the development of the Czech state in some periods. Some precious stones mining was also significant. Today the North-Bohemian Basin area is known for its largest Czech brown coal deposit. The history of mining has been mainly linked to three large ore districts in the North- Western Bohemia region. Jachymov is the most important one. It u...

Anatolia was one of the centers of marble production and trade especially in antique ages.Quarries that provided the marble used in the majestic structures in huge proportions of the antique era were located mostly in Western Anatolia .Marmara Island is in the Northwest Anatolia,Marmara Sea took its name from “Marmaro”,meaning marble in Greek ;it contains the most important white marble quarries and was the most important export center especially during Roman period.Quarries where the bluish Marmara Marble was...

To many countries heavy metal pollution is a problem related with areas of intensive mining activities and industry. Extensive exploitation of metallic minerals in the territory of Kosovo from antiquity until now days effected on environmental and river flows plane pollution. During September/November 2006 in Kizhnica/Artana was done stream sediment sampling (304 samples) main attention on precious metals (Au, Ag) and base metals (Zn, Pb, Cu). The stream sediment survey area is situated ESE of Prishtina with an ex...

Mining engineering education includes four years of lecturing and three periods of summer practices. The practices must be performed at three different mining sides, including underground mines, open pit mines and ore dressing plants. Students are officially advised during decision time of company selection for their summer practice to get better educational results. In order to understand the mining engineering role by the students, the practice should be performed in mines directed and organized by mining engine...

According to an multidisciplinary approach based on survey, analysis and labor work, this study work attempts to tease out some valuable lessons, strategies and guidelines which should be connected to environmental management in Kosovo, a new born state with no effective environmental management in the past. The study focuses on the environmental impact that a huge dormant lead and zinc mining facility, named Trepca causes. The fact that Kosovo is very rich with sulphide minerals shows the potential for mine water...

Some rock types have been more favorable for dimensional building stone since early ages of civilization. These rocks in general are stable and their properties have been long lasting for the selected locations. Due to availability they have been used in human history not only for building stone alone, but they have also been used for other engineering and artistic projects in cities. In this study; mechanical properties of 5 types of ignimbrite rocks and one basalt rock were tested for their usability for dimensi...

Ventilation networks in underground mines may be affected by items such as: locating of objects in air path or destruction of support systems which would result in pressure loss and distortion of air flow. By considering the necessity of keeping the network performances at appropriate level in such conditions, in this study, definition of ventilation network evaluation has been proposed which indicates the network reliability in an uncertain situation. Economic and safety concerns in mines involve this fact that t...

Drilling for mineral resources can be one of the most expensive processes in the exploration and production. Hence, drilling industry has been striving since its inception for developing drilling techniques which allow for fast drilling rates but ensuring the safety of the well and of the workers. Parameters affecting the drilling process can be cast in two major categories, rig and bit related parameters and formation parameters. The first category includes weight on bit, torque, rotational speed, and hydraulic p...

Currently, continuous gas lift has a significant contribution for the purpose of petroleum production from those wells that have low production rates or those that have ceased their production. Therefore, production engineers are constantly finding the ways for optimizing this type of system. Superior designs are achieved when important parameters are optimized prior to system implementation. Optimization of gas injection into the annulus and also the tubing size are of the most important parameters. The functiona...

Geographic information systems (GIS) constitute a new powerful technology that can address many of the information needs of decision makers in state and local governments. Therefore this paper represents an attempt to use this technique to optimize Ghorabi iron ore grade for uses in blast furnace as the first step in steel industry in Egypt.

Bubble-point pressure, gas solubility and viscosity of oils are of the most important parameters in use for petroleum and chemical engineers. In this study a simple-to-use; straight-forward mathematical model is correlated on a set of 94 crude oil data. The correlation is achieved based on an exponential regression. The results are compared with variety of conventional empirical correlations and have also been evaluated by comparison with 12 laboratory data other than those used for the regression. It has been con...

Methane emission into the underground mine environment frequently leads to gas accumulations and therefore increases explosion risk. This risk is very serious since primary gas explosion can act as an ignition source of the secondary coal dust explosion with devastating consequences, generating disastrous events in underground mines. In most cases fatalities occur at locations far from the source of the explosion due to the effects of a propagating large flame and an intense pressure wave. The objective of this pr...

Underground mining leads to creation of subsidence depression on the surface of the undermined territory. An observation network was built to be used for repeated surveying by GPS. From GPS data the surface subsidence was computed. The evaluation of the progress of the subsidence of surface points shows on an important influence of tectonic faults, earlier undermining and generally the geo-mechanical condition of the massif on the surface subsidence.

Classification of information and data of mining in every relevant mining industry plays an important, sensitive, and undeniable role in progressive decision making procedures. Collecting this data in the form of a software collection package can be useful in providing service and information for the future mining activities and industries. Organizing of mining information on base the type of major minerals, geological setting, origin of the forming , and situation of the active and abandoned mines basically leads...

In this study, the water content of the base sediments and rocks under an abandoned small waste water dam in Selcuk University campus in Konya was monitored. This small dam was planned to construct for the beneficiation of the waste water of Selcuk University main campus. After usage of a few mouths, the dam was demolished by campus authorities due to its water leakage through its base sediments. The study presented here contains the work done to determine water localization in the base rocks in front of the dam. ...

Rock-Eval pyrolysis is an exceptionally reliable and effective method in analysis and evaluation of source rocks. The suitable core or cutting sample choices, consequence of processing and investigations are indispensable condition for successful scientific applications. This study demonstrates geochemical data of representative pyrolysed Permian, Triassic and Jurassic fine grained sediments from Central South Moesian Platform Margin. The quantity and quality of the organic matter in rocks are measured and calcula...

Anomaly separation plays an important role in mineral exploration. The fractal based method presented in this study provides an anomaly separation method which accomplishes anomaly separation in frequency domain. It is based on the Fourier transformation, which can be compared to a glass prism. The prism separates light into various components, each depending on its wavelength (or frequency) content. Fourier transform can be viewed as a "mathematical prism" that separates a function into various components based o...

Students approaches to “mine engineering job” in Selcuk University, Mining Engineering Department is one of the study area to comprehend departmental educational target. This study was taken place by surveying the mining engineering students at Selcuk University. The survey covered first year (grade) students for their ideas and expectations in future. Second and third year students were surveyed for their lectures and difficulties they come across during their education. Fourth year students in the department...

Most important factors that made them feeling tired or overloaded in underground, were heat factor and other microclimatic factors influencing working environment deterioration. Mine modernism made those influences become lower rapidly, however, increasing the mine depth, made underground microclimate conditions get worse, as a lack of the fresh air and continuous problems to increase the air content. Microclimatic parameters in the Trepca mine were considered, emphasising horizon 10th and their influence in heat ...

This paper presents the analysis of ground vibration parameters induced by blasting excavations realized at different sites located close to the residential areas. Within the scope of this study, in order to predict peak particle velocity and determine the slope of the attenuation curve for all sites and rock units, ground vibration components were measured for all blast events over a long period. During the study, while the parameters of scaled distance were recorded carefully, the ground vibration components wer...

The estimation of important parameters at Choghart mine stockpile is accomplished by sampling specific parameters that allow detection of useful parts of the Low Grade stockpile. Huge amount of low grade broken rocks near the open pit can causes some environmental problem. Therefore, determination of dump parameters became important in this mine. In this research the estimation of Fe and P was fulfilled in low grade stockpile of Choghart. The Estimation of these two parameters (Fe \& P) can be used for mapping the...

During the production and service to the humanity of mine resources that are needed both by industry and construction of new grand buildings and plants that are the basic news of the modern world parallel to the urbanization and the increase in population, it is known that, like it has been in the past and will be in the future, works of excavation by blastings are inevitable.In order to designate the effects of the blastings on surrounding area, measurements of concussion and air shocks are very important. This p...

The town of Northwich in Cheshire, England has played host to the salt mining industry for 300 years and was the cradle of the modern heavy chemical industry with which it has been associated for approximately 200 years. Historically, the dumping of waste from these industries on adjacent land was unregulated leading to substantial accumulations of ‘legacy industrial solid waste’ (LISW) arising from many processes including brine evaporation and the Leblanc and Solvay processes for soda ash production. This pr...

The difficulty in reclamation of the North Bohemian Basin dumps consists in extremely severe properties of rocks in most of the dumps. It mainly concerns the rocks of the overlaying formation and the formation of brown coal seams. Sands, kaolinitic clayey sands and kaolinitic and illitic clays are the main materials bulk to the dumps. The admixtures of the bulk rocks consist of organic coal, siderite and pyrite. These rocks are mechanically unstable against wind and water erosion and they have obtained adverse, ac...

Kosova geology structurally is roughly divided into two equal-sized areas represented (in east from the Vardar Zone and in the west from the Drina-Ivanjica/Share-Korabi zone) of the one part and the other part in NNE-SSW direction between the Serbo- Macedonian province in Kosova and the geological Dinaric province of Albania. The fault zone of Mesozoic alteration which divides Dinaric and the Korabi of respective geotectonic units in two parts is called Shkoder-Peje lineament. Geotectonic units: Dinaric, Vardar Zo...

Providing of the healthy environment at the mining activity spaces of each horizon or working fronts, is issues that is discussed and is imposed at all decision making levels and afterwards implementation of the exploitation activity of a source. It starts from the preparation of the visibility study and after in compilation of detailed projects, of exploitation flow and finally implementation of control. The ventilation problem is very important because it can cause danger and accidents, professional diseases, po...

Using 36Cl dissolved in groundwater as a monitor of sub-surface neutron fluxes makes it possible to reconstruct information on the U and Th contents of the rocks interacting with the groundwater flow. In particular, the concentrations of radioelements such as uranium and thorium can be evaluated, which are the dominant source of the subsurface neutron flux. This can provide important information in connection with exploration of uranium ore deposits. Based on the results of several case studies from aquifers in cr...