Browse

Mining wastes represent a specific type of waste and, like sites after mining, represent sites where a comprehensive assessment of pollution at these sites needs to be approached, taking into account various specific conditions. Subsequently, the design of the remediation technologies used at a specific location must also be adapted to this fact. Until now, mining waste facilities (heaps and sludge ponds) have been treated as environmental burdens. However, it should be borne in mind that abandoned extractive wast...

The processing, transport and storage of flammable materials in the form of dust generates an explosion risk due to the possibility of initiating potentially explosive atmospheres created by dust suspended in air with various ignition sources, some of which may be their own installations. As explosions can cause human casualties and severe property damage, the explosion risk assessment and the application of appropriate measures by manufacturers and users of installations to prevent the ignition of explosive atmos...

Technology of in-situ recovery (ISR) of uranium is using in Kazakhstan for increasing of production 15 times from 800 ton in 1998 till 22 000 ton in 2013. This ISR process is zero wastes technology. Investigations showed serious potential to improve results of ISR technology using biotechnology methods. Uranium in the ore body is usually presented as hexavalent (soluble) and tetravalent uranium (slightly soluble). To convert uranium into a soluble form, it is necessary to oxidize tetravalent uranium. Leaching solu...

Accidental explosions and fires caused by combustible dusts dust are some of the most significant threats in many industries where layers of combustible dusts and clouds are formed as a result of technological processes. When there is a possibility of a combustible dust to occur during the process, as a residue or byproduct, safety measures need to be taken in order to protect the installations and personnel. In the process of manufacturing the aluminum packaging a combustible dust residue is formed. In the presen...

The final success of the mining business is primarily based on a correct and responsible evaluation of the mining and technical conditions of mining, resp. the mining and geological conditions of the mining site concerned, and all the legal aspects involved. By evaluating these conditions, together with the optimal choice of mining procedures, it decides on the safe and efficient use of the reserved mineral deposit in the given mining area. The mining area must be delimited and determined on the basis of the minin...

The paper addresses the sustainability of technological transport, specifically the transport of materials by pipe conveyors. Environmental aspects must also be addressed as part of the solution to the sustainability of pipe conveyors. Pipe conveyors are suitable for the efficient transport of large volumes of bulk material with a minimum of environmental pollution. Closed rubber conveyor belts are a basic structural element of pipe conveyors. These types of conveyor belts have to resist a combination of factors s...

The properties of the basic materials of conveyor belts and adhesion between these materials affect the proper functionality and service life of conveyor belts. Their reliability depends on the adhesive force between their structural components. The purpose of this paper was to investigate into the quality of adhesion of the rubber cover layers to the carcass, and of the adhesion between the adjacent textile plies in a rubbertextile conveyor belt. The experiments were aimed at measuring the adhesive force using th...

The carrying out of human activities of an industrial nature involves the use, handling or accidental presence of substances of a toxic nature such as carbon oxide. The presence of this gas in closed or semi-closed spaces can seriously affect the human body and when concentrations are high it can lead to death. Knowing how carbon oxide affects the human body and how it disperses into the air is very important for establishing preventive measures. Also, in order to establish the escape routes and the refuge areas, ...

Because the occupational risk expressed the possibility of ending up in a (possible) danger of injury and/or occupational illness, it can represent a criterion of qualitative appreciation of the accomplishment of a human action, indicating how it may produce undesirable effects, materialized by human and material damage. The risk associated with a human action is determined by a multitude of risk factors, both of internal nature (manifested by human error) and of an external nature (technical equipment and related...

Used the specialized software solution regarding to the thermochemical facilities, we can predict detonation (e.g. detonation velocity, pressure, energy, heat end temperature, etc.) and combustion (e.g. specific impulse, force, pressure, etc.) performance of energetic materials. The calculation of detonation parameters is based on the chemical equilibrium steady-state model of detonation. The equilibrium composition of detonation and combustion products is calculated by applying modified White, Johnson, and Dantzi...

The transition to mining benches with transverse panels from top to bottom within the boundaries of steeply inclined layers does not allow transforming the results of mininggeometric analysis sequentially for each individual stage of mining into a calendar schedule of mining operations. Therefore, a model is offered for converting the results of mining-geometric analysis into a calendar schedule of mining operations with sequential mining of benches from top to bottom using phased volumes of overburden rocks and o...

The Alto do Sobrido and Ribeiro da Serra Mines, are two antimony-gold mines located in Gondomar, Portugal, and are part of the Durico-Beirao Mining District (DBMD). In this work, we use four geophysical methods, such as gravity, radiometry, magnetic and electromagnetic, to improve the knowledge about these mineralizations and the lithologies and structures associated with them. These four methods allowed us to study these mineralizations through different physical properties. The gravimetric method allowed us to a...

Initially developed as one of the most successful methods for stimulating hydrocarbon production, hydraulic fracturing (HF) has gradually found its application in related fields, such as underground mining. At the same time, the importance of controlling the crack propagation path increases, since the design of in-mine hydraulic fracturing is a complex technological task due to the influence of mine workings and other inseam boreholes. When performing HF for the purpose of degassing a coal-bearing massif, there is...

In accordance with the latest trends, considerable emphasis is put on all mining companies in the Czech Republic not only on reducing the environmental impact of brown coal mining, but also on overall efficiency, the balance of which can be improved by increasing of the operational reliability of individual components of technological units and reducing operating costs. And it is the latter sphere, in that Vrsanska uhelna a.s. does considerable initiative. In cooperation with the firm RENOMAG s.r.o. and the Resear...

The work is devoted to the study of the effect of powdered WC monocarbide of different grain sizes, introduced into the composition of the binder of diamond grains of the composition 94 WC + 6Co + Cu in the manufacture of a diamond-bearing matrix of BS-NQ drill bits with a diameter of 75.6 mm, designed by ISM (Ukraine). The effectiveness of the mentioned crowns was evaluated according to the proposed indicator F= ( - mechanical drilling speed; h - the value of the deepening per single experience, - - linear wear o...

Psychosocial risks are defined by the International Labor Organization in terms of interactions between job content, work organization and management, and other environmental and organizational conditions, on one hand, and employee conditions, skills, and needs, on the other. Thus, psychosocial risks refer to those interactions that prove to have a dangerous influence on employees' health through their perceptions and experience. Long-term involvement in stressful work situations can lead to onset of burnout syndr...

DETEX Electronic Detonator made by Kirlioglu consists of an electronic circuit with communication and microprocessor and wire bridge resistance coated with explosive material. DETEX Electronic Detonator, which identity information, delay information, charge, discharge and all functions are controlled digitally, is a system consisting of all electronic circuit elements. The system consists of a communication circuit, a master control circuit with a microprocessor, a controlled charge, a discharge and an ignition ci...

It is advisable to conduct mining operations in the conditions of the ultimate state of the opened massif with an increase in the pit wall slope angles below the limit of effective use of combined motor-conveyor transport in the cleaning-up zone of deep and ultradeep open pit mines to the final depth. Such a design of the pit walls is achieved when mining benches from top to bottom within the boundaries of steep-slope layers with the use of in-bench loaders in the cleaning-up zone. The conditions for the occurrenc...

Conveyance of goods and travelling of persons through the tunnels of mines or subway is done on railways of narrow or normal gauge. In interventions in case of accidents, hydraulically operated installations with small dimensions are used for lifting and rerailing the derailed rolling stock. They include hydraulic jacks (double or single acting hydraulic cylinders), supplied with low flow rates at high pressures. Feeding of hydraulic cylinders for lifting and relocating the derailed rolling stock is usually done b...

Uranium mining companies of Kazakhstan during 15 years increased production of uranium more than 15 times using in-situ recovery of uranium (ISR). At the same time a significant part of uranium deposits contains gold, silver, palladium and rare metals like rhenium, germanium, scandium and et`s. The task was set for the complex extraction of associated metals from technological solutions of a uranium mine. Work was carried out to select and study samples of productive solutions and leaching solutions at one of the ...

Managing emergencies is a complex task, which involves precise coordination of many activities and people, as well as fast decision-making in environments in which critical, vital information can often be lacking. From a technical and technological point of view, in spite of all advances encountered in most industrial branches, accidents with human casualties and material damage can still occur. For this reason, the presence of special intervention and rescue teams within certain industrial/ economic units is esse...

The storage of explosives and pyrotechnic articles must be carried out in complete safety conditions and only in storage facilities (depots) arranged and authorized for this purpose. The legislation in force has strict provisions on the rules of explosive & pyrotechnics storage, handling and access in the storage facilities. Failure to comply with certain provisions of the law in the product safety data sheet prepared by the manufacturer may lead to the generation of hazardous situations which may result in very s...

Currently, one of the main problems in the extraction of useful minerals in term of environment is their transport in quarries. With the requirements to reduce the noise of the belt conveyor track, we were looking for a suitable solution to reduce it. So, we started thinking about attaching rollers made of a material other than steel. The final solution was to insert classic rollers in polyurethane beds called suspension cartridge - which are roller holders made of polyurethane and reinforced with a steel liner to...

The energy crisis triggered globally in the last quarter of 2021, forced Romania to go through a winter with liberalized electricity and gas prices, a period unprecedented in terms of consumer prices, accentuated by the result of closing energy targets that coalfired operations as a result of the imposition of EU conditions for the restructuring of the mining and energy sector. The year before, 2020, the COVID-19 pandemic, with restrictions imposed, produced a decrease in electricity demand, a decline in coal-fire...

The economic results of many dynamically developing European countries largely depend on the availability of mineral raw materials. For this reason, securing their supplies from import must be supported by a committed foreign policy as well as a sustainable raw materials policy in the field of their obtaining from domestic sources, both from mineral deposits, as well as secondary and waste sources. Raw material security must be based on the diversification of supply sources and minimizing supply risks. The results...

Underground mining remains one of the most dangerous occupations in the world, and coalmining is known for its high accident rates. In this paper we aim to present an overview of safety in the extractive industry and we will present statistics on known accidents. The repeated occurrence of explosions in underground mining raises questions about the measures taken to prevent their occurrence. Hazard identification and risk analysis are necessary to identify adverse events that may lead to a hazardous situation, to ...

In recent years, virtual reality developers have managed to create an artificial environment that can simulate reality so that the user has the impression of an almost real physical presence in the virtual world. By overlapping and synchronizing projected images with spatial sounds and even with forces that interact with the user, the user is detached from the real environment and an all-encompassing involvement in the virtual world occurs. Virtual reality is frequently present in aviation, medicine, military trai...

The article justifies the need for technological solutions in the use of polymer-composite materials in order to limit the impact of dynamic frictional forces in oil drilling. The relationship between macrostructural surfaces was investigated, in particular increasing the effectiveness of the axial load on the drill bit during drilling directional and horizontal wells. It is established that the polymer coating of drill string elements (BC) based on fluoroplastic brand F-4, with a small thickness of 2 ? 3 mm and t...

The evaluation of the seismic action generated by blasting, aims to establish the connection between the levels of ground vibration with the parameters of the blasting and the characteristics of the geological environment related to the quarry. In order to assess the seismic effects on site of the mining / civil / industrial objectives within the quarry, the criterion of the oscillation speed of the soil particles was chosen, because it was considered to be the only reproducible parameter for the whole frequency r...

Pipe conveyors belong to the most perspective systems for continuous transport technologies intended for the transport of bulk materials in various industries. In addition to the product and process quality, another important component of the quality evaluation system for pipe conveyors is the service quality. Service quality evaluation is based on the service quality of enclosed rubber conveyor belts which represent the most sensitive and the most expensive structural component of pipe conveyors. This article ana...

The Valea Jiului coal basin is the largest mining basin in Romania and includes from east to west the mining fields: Lonea, Lonea-Pilier, Petrila-Sud, Petrila, Livezeni, Salatruc, Dalja, Iscroni, Aninoasa, Vulcan, Paroseni, Lupeni , Lupeni-Sud, Barbateni, Uricani, Valea de Brazi and Campu lui Neag. The first opening works in the Lonea perimeter began with the excavation of the Rascoala gallery, in 1870, a gallery supported by brickwork. Also in the same period, the up-to-date exploitation of the outcrops from the ...

The main role of ventilation systems and especially air conditioning systems is to create indoor conditions and air quality inside the rooms that are independent of external atmospheric influences. The sizing of ventilation systems and especially of air conditioning systems is done, in most cases, by considering the climatic elements as a basis for calculation. The real limit to air quality insurance it consists in maintaining in the air certain concentrations of harmful substances which do not endanger human heal...