Browse

This article deals with the spatial position of tracks surveying using a measuring truck and automatic total station. At the beginning of work it was necessary to gain theoretical knowledge on geodetic activities carried out in the process of reconstruction works on the track surface, and to define the concept of the geometric position of the track. Collecting necessary design documentation is an essential part of the whole measuring process. Adherence to the specified accuracies and deviations in the Slovak Techn...

The G.I.S. It is used to create, store, analyze and process information spatially distributed through a computerized process. GIS technology can be used in various scientific and practical. G.I.S technology is increasingly used in the field of cadastre. To use technology G.I.S. in cadastre we must have both graphical database and the type attribute must be focused on cadastre requirements. Items graphic database is collected by conventional measurements, measurements GPS, photogrammetric measurements, through digi...

An effective development of underground space is impossible without the use of modern systems of underground navigation. And the high-precision inclinometric survey is one of the main problems of such systems, as well as the complicated systems of drilling rigs, which are usually used in the construction of oil and gas wells. As a result of research described in the paper the authors scientifically prove a necessity of new special indices of geomagnetic activity introduction. Also the algorithm of their calculatio...

An engineering survey to determine the existing height of constructions is a frequent requirement that the land surveyors are faced with. A height survey may be needed to verify building elevation while in construction, or according to the legislation, in order to apply for a building permit a detailed topographic plan must be conducted. Such a topographic plan must be prepared by licensed surveyor and include the measurements of nearby properties, adjacent with the land parcel on which the building authorization ...

In this paper, a method of calibration of the levelling rod Carl Zeiss Jena No. 55822 was proposed. Within a method procedures we follow the requirement of the International Standard ISO / IEC 17025: 2005 and all necessary observations were performed in the Metrological Laboratory of Institute of Geodesy and Geoinformatics, Faculty of Civil Engineering, University of Belgrade. In the process of the calibration, we used a laser interferometer Hewlett Packard HP 5528 and specially adapted auxiliary equipment for pla...

The paper talks about the development of the geodetic networks using measurements of direction from the fixed points (with their coordinates known) towards the variable points (determined points). It starts from a situation that is given seven geodetic points whose coordinates are known, and an unknown point must be framed in such a network. After observation directions are carried out in three of the seven known points must be determined the coordinates of the unknown point. In order to reduce the large number of...

This paper sheet on пїЅDecoding GPS data for single point positioning computation by using Python programming languageпїЅ shown the program to compute receiver coordinates with use RINEX navigation and data files. In the program it is used single point positioning method to compute coordinates, and the program is coded in Python programming language. Sheet includes a part of the source code and block schemes, which described operation of the program. The comparison of the results of the approximate coordinates sho...

In this paper we focus on the evaluation of land use changes in the cadastral areas of the cities Martin and VrпїЅtky. Both cities are situated in the Tur?ianska kotlina Basin between the MalпїЅ Fatra Mts. and Ve?kпїЅ Fatra Mts. in the northern part of central Slovakia. Establishment of new industrial enterprises in the second half of the 20th century led to the creation of new infrastructure, urbanization and the subsequent interconnection of both cities. Railway transport and the пїЅOS VrпїЅtky company (Railway ...

When conducting underground works, it is necessary to take into account their possible consequences for underground and surface objects. The purpose of this work was to identify the need to use three basic methods for estimating and predicting the parameters of subsidence of the earth's surface and deep layers. The process of extracting minerals from the earth's interior leads to an increasing need for underground excavations beneath the area of protected objects (surface and underground). In this regard, engineer...

Optimization of the measurements is an important theme nowadays of the geodesy and especially engineering geodesy. The optimization can be categorized into orders, from the zero to the third order. The zero order design is the coordinate system selection, the first order is the configuration optimization, the second order is the optimization of the number of the repetitions, the third order is the improvement of the existing network by adding point and/or observations. In the engineering surveying the second order...

In the process of geoid determination one of the most important problems is to determine the effect of topographic masses. Traditionally, solving that particular problem started with the reduction of gravity on the geoid and subsequent calculations the effects of the reduction on the value of the geoid undulations i.e. calculating the indirect effect of reduction. In this paper a model of the indirect effect of Helmert method of condensation over the territory of Serbia was shown. The model was created on the in 5...

Social housing management is an area of asset management within local government which is strongly dependent on legal and socio-economic system as well as public housing policy. In many countries housing systems are in transition towards privatization, deregulation and decentralization of public tasks. The transformations in institutional and economic context have lead to more market-oriented social housing management. They have not been an isolated process but a part of broader one termed New Public Management (N...

The paper presents a MEMS-INS/GPS data fusion algorithm based on an adaptive neuro fuzzy inference system for the prediction of the navigation solution errors during GPS outages. The study was performed during the second stage of a research project related to the structural design of a data fusion intelligent algorithm based on an adaptive neuro-fuzzy inference system and Kalman filtering, for the prediction of the positioning errors during GPS signal outages. In this stage, the project research team targeted to r...

The results of research studies from deformation investigation of geotectonic recent movements in east Slovakia are presented. Satellite measurements were implemented in the geodetic network in the Kosice Basin. Transformation of the geodetic points coordinates from WGS-84 into the Slovak national positional coordinate and height system was carried out using Helmert seven-element transformation. The aim of the deformation measurements was determining geotectonic recent movements especially in the urban agglomerati...

Related to geodetic systems to take decisions in such a complex environment is not at all an easy task. To handle such a complex interdisciplinary approach several methods have been developed, using knowledge from different disciplines by considering several aspects and criteria. These can be very different one from another, some of them being of qualitative type, indeed hardly quantifiable. In this situation the question is which instruments could be used in order to support such a Multi-Criteria Decision Analysi...

Establishing absolute geographical location in underground spaces such as mining exploitations, caves, deep crevasses, or in deep open pits is a technically difficult problem. Modern techniques used for general outdoor environments cannot be used in subterranean environments. The performant Global Navigation Satellite Systems (GNSS), such as GPS, GLONASS, GALILEO, BEIDOU are not available in underground spaces, due to the impossibility of propagation through soil and rock of radio waves at frequencies and transmit...

At the moment in Romania there are a total of more than 7000 individuals and legal entities authorized by ANCPI (National Agency for Cadastre and Land Registration) for geodetic, photogrammetric, cartographic, cadastre and land registration works [4]. According to ANCPI standards there are regulated minimum technical conditions necessary for authorization including types and performances for geodetic and topographic equipments. At the national level the State Legal Office of Legal Metrology (BRML), which is in cha...

Large rotary drum machines are often used in technological lines for continuous production. These are complex structures which during operation are exposed to stresses and deformations under the influence of temperature and stress. To determine the geometric parameters of such units in this paper we propose to use a total station. The basic idea of the method is remote real-time geodetic measurement of the machine parameters in the reflectorless mode. The task posed is solved by simultaneous measuring of the point...

VRAGEO Project - Integrated Seismic Hazard Information Platform for Vrancea Zone Surveillance Through Advanced Geospatial and In-Situ Methodologies пїЅ have as main objective to enable free and open access to seismic hazard information in Romania due to Vrancea source in support of GMES (Global Monitoring of Environment and Security) through the development of an operational framework, a set of supporting tools and advanced geospatial surveillance methodologies of Vrancea tectonic active region. Information derive...

The nature of the soilпїЅs foundation bears a major influence on the time behavior of a building. Geotechnical studies are chosen based on the appropriate constructive methods for the terrain situation. There are however, cases where, even if the constructive solutions are adopted accordingly with the conclusions of prior studies, due to an inadequate approach in the achieving process of these studies, there are deformations that occur in the structure of the constructions, that affect their exploitation process o...

Global Navigation Satellite System (GNSS) receivers are currently the standard equipment for precision positioning, navigation and timing, but their use in difficult environments, such as open mining pits, deep quarries, roads in canyons, is hindered by multipath propagation conditions or interference from adjacent equipment. In this paper, the improvements in signal tracking brought by use of vector tracking loops in GNSS receivers are analyzed. The effects of multipath conditions on tracking errors are diminishe...