Browse

As a result of mining activity on the earth?s surface the phenomena that have negative effect on the objects in area of influence of extracted area exist. Depending on geomechanical qualities of hanging wall and surrounding rocks, geological conditions of depositing, seam and depth of position of deposit, critical angle of influence, way and time course of mining and other parameters the horizontal and vertical movements always appear to a greater or lesser extent. They can be described by inclination, proportiona...

Over the past years the evolution of geodetic instruments is taking the way of minimalization and mobility. Remarkable technological progress can be recognized on a field of mobile scanning. Wide variety of usage of handheld laser scanners and its accuracy of measurement in comparison to other geodetical methods was settled as the main objective of this contribution. The introduction of article is concerning about the problematic of documentation of historic landmarks. Following pages are describing the methodolog...

In Poland there exist legal regulations concerning the protection of agricultural and forest land. The paper aims to investigate the changes in the area of agricultural and forest land in Poland since the accession to the European Union in the year 2004. The study was based on statistical data for the years 2004-2017 provided by Statistics Poland. Paper presents: (i) changes in the land area by land type, (ii) changes in the fallow land area, (iii) changes of agricultural land area resulting from land designation ...

This paper presents the combined method of determining the deflection of vertical components ? and ? based on the precise levelling and GNSS measurements. In general, there are several methods, but the combined method simplifies data collecting and subsequent processing of results in comparison with other methods. Components determination was performed on the high precision levelling network in Serbia, by calculating undulation on each point, so as azimuth and length for each side of the network starting from refe...

Modern digital 3D technologies are already an integral part of the construction industry. 3D technologies include 3D scanners or photogrammetric surveying of buildings, which we are dealing with in our faculty research. The main topic of the article is the evaluation of 3D building scanning processes, photogrammetric surveying and subsequent processing of acquired data. From the acquired point clouds eventually produce project documentation of the current status of the building with minimal deviation from the actu...

For a more complete use of information in geodetic measurements of rotary kiln geometric parameters, a method of mathematic simulation of the stress state in the kiln shell is proposed. The essence of the calculation method is to ascertain the stress-strain state of the kiln shell as an elastic statically indeterminate multi-span beam. The disclosure of static uncertainty is performed by the displacement method, which allows to unify the calculation algorithm for kilns with an unrestricted number of intermediate k...

Satellite Laser Ranging (SLR) measurements of the geodynamic satellite LAGEOS-1 (LAser GEOdynamics Satellite) for the period January 2000 - June 2013 are processed and analyzed. The analysis are carried out with the Satellite Laser Ranging Processor (SLRP) software, version 4.3, developed in the Department Geodesy of the National Institute of Geophysics, Geodesy and Geography at Bulgarian Academy of Sciences. A new module for parameter estimation using the least squares method was developed to allow flexible treat...

This paperwork is dedicated to the research of the quality of height anomalies derived from the Global Geopotential Models GOCO over the Serbia territory. Three different types of approaches for the same model were considered: time wise, space wise and direct approach. The quality of the mentioned models is determined by comparison with terrestrial data of height anomalies, that are relate to the second high precision leveling network of the Republic of Serbia (the period of realization of tide gauges observations...

The way of maintenance and updating the real estate cadastre is regulated, at present, by the Act of May 17,1989, The Law of Geodesy and Cartography [6] and by the decree of the Minister of Regional Development and Building Industry of March 29,2001 ? the cadastral law [1]. Updating the cadastre at the stage of setting out a building object is of particular importance; it has specified tax effects. Usually, the charge due to a property tax is increased what results from the real discontinuation of agricultural act...

The article presents the results of statistical processing of field surveying observations data of the displacement process on the earth's surface. Currently, the main method to monitor displacements and deformations of the earth?s surface during mining operations is to determine the coordinates of reference points of observation stations. This method allows you to obtain reliable data on the movements of points in the displacement trough and form an idea of both the shape of the trough and the values of deformati...

This article opens a broad topic of temperature measurement to suppress the influence of atmospheric refraction on geodetic measurements. The article's content is limited to the basic view of atmospheric behaviour, specifically, on the measurement of the temperature changes in the atmosphere close to the terrain (height 0-2 m), in which engineering geodesy measurements are commonly performed. For this basic experiment we have chosen a grassy spot on the campus of the Faculty of CTU in Prague. The measurement itsel...

The possibilities of using gravimetric data obtained from global geopotential models (GGM) for the territory of Bulgaria in the processing of precise levelling measurements for the determination of normal differences and geopotential differences are presented in the article. The researches were carried out on first order levelling lines of the State Levelling Network of the Republic of Bulgaria, situated in different topographic conditions, as well as in conditions of different anomalous gravitational field. The d...

More than 400 geodetic and cartographic documentation centres are active in Poland; they are maintained by starosts (heads of districts) and presidents of cities with rights of districts at the level of heads of districts, or cities with rights of districts. In particular cases those centres are maintained at the municipal level, if a relevant agreement has been concluded with a mayor or a president of a city which is not a district. At present the method of producing maps for design purposes is regulated by two l...

The monitoring of the construction behavior is one of the important activities carried out to determine the state of construction, subject to various natural and anthropogenic actions at a given time. In Romania, the activity of rockfill dams monitoring is regulated according to the importance category (A, B, C). The Rausor Dam is located downstream of the confluence of the River Rausor with the river Targului, which springs from the Iezer-Papusa Mountains. The dam is located at 7.5 km from the village of Leresti,...

Scientific and technical progress created conditions for rapid development and introduction in surveying - geodetic production essentially and qualitatively new measuring and processing technologies. These technologies lay the foundation of formation and practical application of results of the geodetic measurements differing in more productivity, technological effectiveness and essentially important - bigger accuracy in comparison with traditional technologies [1]. Installation of the permanent base station of dif...

The process of road construction in Poland, including mainly new sections of motorways, was intensified until 2012, when preparations for the European Football Championships were underway, to which events Poland was a co-organizer. And although this process has contributed to a significant improvement of the road network - various categories (mainly motorways and expressways in the east-west direction), the satisfactory state of road density and technical condition is lacking. Technical, financial and legal aspect...

The early 21st century is a time when unmanned surface vessels (USV) are used in various measurement applications. Modern autonomous and unmanned vessels are increasingly often used in bathymetric measurements whose aim is to measure the seafloor with the sufficient positioning accuracy. Therefore, the use of USVs in hydrography can be seen as the beginning of a new era in this regard. This paper presents bathymetric measurements with the use of an unmanned surface vessel in waterbodies of the Republic of Poland w...

The present paper comprises a complex topographic survey for the identification and registration of a farm type immobile consisting of company headquarters, stables, silos and concrete slabs for registration in the land book. The farm where the topographic works were executed is a farm specializing in the breeding and fattening of buffaloes, the production of milk and its processing. It was set up in 2007, and the initial constructions were built between 2007 and 2015. The farm is located at the entrance to Pecica...

Nowadays, according to the current century, the one of speed and information, the way of calculating the volumes of aggregates is desired to be much faster and more accurate in every aspect. The volume designates the property of a body to have three-dimensionality, that is development along three perpendicular axes on which the length, width and height are measured. All three those dimensions are actually length values that define the place which that object occupies in space. The theme of the project is to calcul...

The objective studied is a collective dwelling with the height regime of S + P + 3E and offices located on Str. Borhanci, Cluj County. From a geometric point of view, topographic surveying works ensure the application of various types of constructions, ways of communication, art works, hydrotechnical works on the ground. In our case, the execution of the tracing works was accomplished by moving from the upper to the lower order, from the geodetic state to the tracing base. An essential factor was the choice of the...