Browse

The geometric levelling of the highest order has been the main method for many scientific and engineering tasks for more than 150 years. One of them is the monitoring of the recent vertical movements of the Earth-s crust. In order to understand the low of accumulation of the discrepancies in levelling lines, many investigators have planned and performed various experiments and analysis through the years. As a result, the systematic effects of many sources of measurement errors have been studied, and partly or full...

This paper presents the monitoring of an eroding phenomenon (gully) near Ciurila, Cluj County, Romania, using UAV (Unmanned Aerial Vehicle) and GNSS (Global Navigation Satellite System) technologies. In this sense, the monitoring results through sustainable and non-invasive technologies are presented, following four cycles of observations, carried out between June 2019 and April 2021. The paper aims to present the advantages and limitations of such a study, as well as the importance of monitoring erosion phenomena...

Constructions extending over large areas or distances raise problems regarding their setting out, because these elements are determined in the official projection of Romania, namely the 1970 Stereographic map projection. For the territory of our country, this produces distortions from -25 cm/km to approximately +64 cm/km in terms of distances and between -5 sq. m/ha and +12.76 sq. m/ha in terms of areas, depending on the distance from the projection pole and, implicitly, from the circle of zero distortions. For th...

The issues related to the use of products generated from Continuously Operating Reference Station (CORS) for precise positioning are the main focus of the study. Geodetic measurements were conducted at a real site, and different types of data provided by commercial CORS networks were compared - Network Real Time Kinematic (Network RTK) via VRS, generated data for subsequent processing (Virtual Rinex), and raw data from a physical station. The current national regulations, as per [1] , were adhered to, and the aim ...

Due to usage, handling, and improper storage, measuring tapes undergo changes in their condition over time. For this reason, regular inspection is necessary to ensure the desired quality of results, aiming to verify the accuracy of the tape and its usability in practice. During the calibration of measuring tapes, the position of the scale divisions on the tape is evaluated using a device known as a horizontal comparator. This device consists of a linear base on which a carriage with evaluating equipment, in our ca...

Land administration system in Slovakia is a large system. Many incomplete data and errors have been incorporated into its content since 1850. Most problems in the field of land administration system are solved by judicial proceedings, in which the expert testimony is required to reach the conclusion. The gathering of data about a particular land parcel consists of investigation of documents and maps. The investigation of map documents is very important for the whole process. The derivatives of these maps are store...

The paper presents a quality evaluation of the kinematic model concerning the relative height movement of the Earth-s crust that refers to the territory of the Republic of Croatia. This kinematic model enables determination of vertical displacements and movement speeds of discrete points on the Earth-s crust. So far, the quality of the model has been rated only for certain parts of the Croatian territory, but this paper shows the results of the model-s quality evaluation for the entire territory of the Republic of...

Precise levelling networks play an important role in the research of many scientific processes, e.g. the recent crustal movements, the change of ocean and sea levels, geoid or quasi-geoid, etc. Their appropriate adjustment goes through the choice of suitable weights, which have physical common sense and minimize the standard errors of the adjusted heights. The conventional weights are supposed to be inversely proportional to the length of levelling lines, due to the assumption that the accumulation of errors in th...

Underground mining operation in salt deposits requires special control over rock mass stability. Changes in stress within the rock mass cause gradual convergence of underground workings. A slow convergence process with a complex spatiotemporal distribution requires the measurements with high accuracy, which is carry out on a well-planned spatial distribution of observation network. The aim of the study was to present the procedure of designing and implementing observations of convergence in salt caverns within a s...

The study of a gravimetric network is closely connected with determining the value of the drift on the gravimeter scale (zero-point drift; drift). The realization of a great number of over-measured quantities makes preliminary processing of gravity measurements a hard, slow, and delicate process. The main purpose of this research is to investigate a method that would simplify the overall technology of gravimetric measurement and post-processing of the results obtained. A modification of the commonly adopted adjust...

Mobile handheld laser scanning is already an established technology in today's surveying practice. Mobile handheld scanners are mostly used for surveying and 3D rendering of indoor spaces. However, the subject of this paper will be the area of real estate cadastre. The aim of this paper is to verify the capabilities of mobile handheld laser scanning technology for cadastre of real estate purposes. The paper will focus specifically on surveying activities related to the production of a survey sketch for designation...