Browse

The aerogel is a nanomaterial that may represent a viable alternative to the traditional thermal insulations, especially when it is required an increase of the thermal performance of the building envelope elements and also a reduced thickness of their finishing layers. The paper presents the conclusions of some studies regarding the thermal behaviour of the aerogel and also some improvement possibilities of this material and of other materials, by integration of the aerogel in their structure. At the same time, th...

Developing biocomposites materials is a part of the strategy of sustainable development in construction. This paper presents the advantages, the disadvantages and problems, still unclear, to achievement the biocomposites materials, HEMPCRETE type. The most important thing, highlighted by literature regarding the creation and use of this material type, is the extremely low impact with the CO2 pollution, which usually accompany technological manufacturing processes, putting in place and exploitation of construction ...

Nowadays, an important objective for researchers is to find an alternative to build cheaper and greener, sustainable and also durable. To discover a material with better thermal and acoustic performances than conventional concrete by using natural and renewable components in its composition became also an obvious trend. The agriculture products, mainly those considered as waste in this field, fulfill all the above mentioned requirements, being also widely available and with higher thermal and acoustic properties t...

Construction of green buildings has become a kind of global trend, but its implementation varies greatly by country and region, including the rate of growth in green involvement, triggers and obstacles impacting their growth. Green buildings gives to the forefront of energy efficiency also the impact of buildings on the environment, the environmental burden through production of raw materials and the impact of buildings on the whole region. Green building is therefore designed, built and operated also with regard ...

This article is referring to a study regarding the energy consumption and data for the internal heat gains and opening hours at a big size commercial building built in Bucharest, Romania. The monitoring was done during the maintenance building period of time starting with the opening day till the present days. It was calculated the energy demand for heating, cooling, ventilation and lightning systems depending on the average daily running hours and on the internal heat gains for each type of area destination (like...

New building materials were obtained in the last decades by using different types of cements, aggregates, additives or additions. Additions such as s powder, aggregate, fiber, etc. were tested for obtaining new properties of concrete or for finding a way to consume the wastes. The paper presents the experimental results obtained on fly ash concrete with waste fibers. The concrete was prepared with substitution of cement with fly ash in different dosages (10%, 15%, 20%, 30% and 40%) and two types of fibers (hemp an...

Modern buildings require energy-efficient heating and cooling method for the both parts of the system, the heating/cooling source and the heating/cooling distribution system. Modern heating and cooling systems typically combine a reversible heat pump with a low temperature radiant system. Thermally activated building systems (TABS) use the large thermal mass of concrete from building structure as a buffer for lowering the cooling and heating loads during the day. In this paper we illustrate the floor covering infl...

Development of Fibre Engineered Cementitious Materials with Self-Healing Capacity (SH-FECM) was an important goal of the recent research programmes conducted in NIRD пїЅURBAN-INCERCпїЅ Cluj-Napoca Branch. Several theoretical and experimental studies were performed in order to improve the composites, considering both, fresh and hardened state properties and also the performance as filling material of the narrow spaces at the beam to column interface within the Hybrid spatial joint model [1]. Present studies are foc...

The benefit of recycling industrial by-products in the construction industry led to growing interest in exploring and potentially exploiting these by-products, in the context of sustainable development, and in creating new materials. Fly ash is a type of byproduct waste, having enjoyed considerable attention, especially from the perspective of creating and perfecting fly ash based geopolymer concrete. In Romania, over 80% of industrial waste is deposited, this being the most widely used method of waste disposal. T...

This paper presents a study of performance evaluation of some fluid cement-based mortars containing mineral admixtures used as structural bonding material for fixing reinforcing steel bars in hardened concrete. The paper includes the developing of performance anchoring mortar for post-installed rebars based on ordinary blended cements. A series of standardized tests were performed within the experimental setup with the objective of assessing the performance of the mortars in terms of fluidity, cohesiveness and ear...

The recent demands regarding energy efficiency of buildings across the European Union, namely the nZEB concept, impose among other improvements, the thermal behavior optimization of building components that define the building envelope. In order to achieve the imposed nZEB criteria, conventional thermal insulations with increased thickness have to be used, which is inconvenient in several cases. The paper presents an alternative solution, given by Nano insulation materials, such as aerogel and vacuum insulation pa...

Cement manufacturing has been always ranked in the list of the main sources of carbon emissions among industrial activities. Almost 5-7% of global CO2 emissions are caused by cement plants, while about 900 kg CO2 is emitted to the atmosphere for producing one ton of cement. On this account, there is laid pressure to reduce cement consumption by the use of alternative binders. In this paper, we would like to show that wheat straw ash can be used for the fabrication of construction composites with lower cement conte...

The handling and disposal of voluminous sludge produced from water treatment plants poses difficulty to environmental scientist and engineers. In fact, its environmental friendly management and disposal is challenging task and requires careful consideration. In this study, sewage sludge ashes were examined as potentially supplementary cementitious materials. The raw sewage sludge was provided by two different municipal waste water treatment plants, coming from Poland and Greece respectively. The calcination of pre...

The calculated energy efficiency and specified physical properties of building materials may change significantly during the initial years of a buildingпїЅs operation under real climatic conditions. Five small test buildings with different wall assemblies were built in Riga, Latvia to compare different building construction characteristics under Latvian climate conditions. The heating energy consumption, thermal transmittance, air relative humidity and other important energy efficiency and environmental parameters...

Sustainable design attempts to be perceptive to the environmental impact of the building project at each construction stage by evaluating the site, the embodied energy of the selected materials, as well as the proper construction techniques, adjusted to the local conditions. Moreover, physical hazards (flammability, corrosion) and/ or health hazards (toxicity, irritations) of the materials are especially important not only for the construction workers, building owners and occupants, but also for the environment, c...

This article is referring to a short study regarding the energy efficiency status in retail industry in Romania, in particular an analysis of the big sizes commercial buildings in this matter. It contains data which will allow us to compare an existing building with the industry norms in terms of the energy consumption and energy costs. Additionally, there are some recommendations provided to be taken care of in the near future for controlling energy better, using energy in a more efficient way and reducing avoida...

This article is the continuation of the paper published at the conference SGEM in 2016. European product standards generally do not specify the qualitative requirements for individual product characteristics. EN 14695:2010, which deals with the waterproofing of concrete bridge decks, is not an exception. The national standard CSN 736242:2010 sets quality requirements for bitumen sheets. The type of the modification of bitumen coating is not considered in quality requirements of this standard - the mass modified by...

Nowadays concrete is the worldпїЅs most widely used building material. A decisive constituent is cement, which causes in production nearly 10% of the worldпїЅs CO2 emissions. Ultra High Performance Concrete (UHPC), a new high-tech concrete with an outstanding compressive strength of 4 to 6 times the strength of standard concrete (NSC), is the most advanced building material in reinforced concrete construction and increasingly used in different countries all over the world. Due to its high compressive strength, bui...

The global level of urbanization is growing. Some estimates indicate that till 2030 the degree of urbanization will reach 83% in economically developed countries. In this context, large urban areas are already facing with problems due to water and air pollution, noise pollution, forming "heat islandsпїЅ, energy consumption, overload of rainwater collection systems and human health degradation. In this paper are presented the benefits of green roofs and the contribution they play in solving problems in urban areas....

Wood based panels are mostly used in the building industry. Using these panels in details of flat roofs is one from their advantages. Problem occurs in the case of increased humidity mainly by leakage or water vapor condensation in the construction which causes degradation of panels. That causes also changes in basic characteristics and reduces the bearing capacity. This work contains utilization of the most used wooden panels. In thesis author evaluates influence of humidity in flat roofs details on creation of m...