Browse

Pyrophyllite was investigated in this study as a potential adsorbent for the removal of glyphosate, a common herbicide for the control of a wide variety of weeds. There are several publications in the literature that discuss how glyphosate interacts with clay minerals such as montmorillonite, kaolinite, and bentonite, but there is no information regarding the possibility of glyphosate removal from aqueous solution using pyrophyllite. In this study, the adsorption of glyphosate from water samples onto pyrophyllite,...

In the context of the recycling of waste from wrought aluminum alloys, especially food packaging, these were re-melted and cast into bars. The alloy thus obtained contains up to 2.0% Si, 0.8% Cu, 2.0% Fe, 2.5% Mn and other elements in tenths of %. The problem in its further processing is the porosity. Several methods were used to quantify it, of which the most accurate method was weighing. The disadvantage of this method is the requirements of the competence of the personnel as well as technical equipment. Other m...

The lack of new deposits with a rich copper content and the depletion of old deposits, as well as the need to comply with environmental requirements, raises the issue of the need to process the tailings of metallurgical industries. In Kazakhstan was accumulated significant stocks of tailings "Borgezsay" and "Staroye". The tailings reserves are estimated at up to 1 billion tons. Sample evaluation showed that the average copper content in the tailings is 0.15-0.2%. More than 1 million tons of copper are stored in th...

The priorities identified by the EU-s and national strategies and the main target areas promoted by the legal regulations concerning this area are precision food production, investments and developments, and - in the area of ensuring the resources needed to achieve these - a more efficient production, the improvement of sustainability and food safety. To achieve these objectives, the European Union has identified the widespread introduction of precision technologies using digitization technology in the food indust...

The development and efficient use of renewable energy technologies is essential to sustain access to clean energy for all. In developing countries, it is necessary to improve the efficiency of biogas production to contribute to the decarbonization of the energy supply. This study aims to assess the quality of biogas produced from household biogas plants in rural areas of Cameroon. Through snowball sampling, data were collected from forty-five (45) functional biogas plants across the five agroecological zones of th...

This article is focused on performing a SWOT analysis of agricultural waste management methods. This approach can be applied in the biogas technology strategic planning process in Ukraine, which can solve the issue of implementation of environmental guidelines for the development of biofuels and biofertilizers. The main factors that determine how digestate is used are its quality, local conditions, regulations, and documents. Fertilizing fields with digestate provides many advantages, for example: reduced demand f...

This research aims to develop a new strategy to valorize wasted COVID-19 masks based on pyrolysis to convert them into useful products. First, surgical and FFP2 masks were thermally pyrolyzed at temperatures of 450-550 ?C with the purpose of determining gas, liquid (oil) and solid (char) yields. At low temperatures, solid yield was high, while at high temperatures the gas product was enhanced. The highest yield of liquid was found at an operating temperature of 500 ?C in both surgical and FPP2 masks pyrolysis. The...

Biomethane and other renewable gases will enable to thrive on a fully renewable energy system. Biomethane has similar qualities to natural gas, so it can be injected into existing natural gas infrastructure or used as a biofuel for transport. Also, its use means a reduction in greenhouse gas emissions and dependence on fossil fuels. This work is part of the LIFE LANDFILL BIOFUEL project that aims to implement a cost-effective system based on new techniques to improve the recovery of landfill biogas and the product...

The paper deals with the possibility of obtaining zinc and iron from waste galvanic sludge, which arises during galvanic plating. Galvanic sludges, which contain more significant amounts of heavy metals, form wastes that are suitable for recycling. These arise during the treatment of wastewater from the operation of the electroplating plant. It is a mixture of metal hydroxides, mainly iron, zinc, chromium, and others. The sludge is sedimented in the reaction wells and, after sedimentation, is pumped into the sludg...

Waste and by-products from the food industry put pressure on the environment. FAO defined food losses as losses along the food chain between producer and market, while safe and nutritious food is thrown away as waste. About a third of the food produced is wasted. A significant amount of food is disposed of as waste, especially in developed countries, and this also means the disposal of resources used to produce food. Food waste is not only an economic problem, but also an environmental and moral problem. Food dive...

Ash and slag waste (ASW) is a finely dispersed mineral material resulting from the combustion of brown and hard coal at thermal power plants. The involvement of ash and slag waste in industrial circulation is one of the effective ways to solve the issue of energy and resource saving. Utilization of ash and slag waste in industrial production will provide a solution to the environmental problem of environmental pollution by industrial waste - technogenic fine dust and harmful effluents by gradually reducing the rat...

Uranium in situ recovery (ISR) is an effective method for extracting uranium from sandstone deposits. Many uranium deposits are characterized by the presence of associated metals: gold, platinum group metals and rare earth metals. For one of the uranium deposits in Kazakhstan, studies were carried out on sampling from productive wells at the ISR of uranium. An analysis was carried out for the content of uranium, rare earth elements, scandium, germanium, yttrium and other metals. For the study, samples were taken f...

As the planet-s population increases, pollution entering waterways increases, and the availability of non-renewable raw resource materials reduces. It is possible to reduce this pollution by constructing treatment wetlands, but these wetlands use significant amounts of natural aggregates. The question arises: is it not possible to replace non-renewable resources with recycled materials made from construction and demolition waste? This article examines the applicability of recycled building materials as filter medi...

Plastic in the environment poses significant problems for the present, as well as for future generations. The consequences and the exposure of living organisms to plastic pollution are not yet fully understand. The risks to health, environment and climate, due to the ubiquity and persistence of plastic are of great interest. The current study analyzes the perception of the Romanians regarding plastic pollution, in order to determine any pro-recycling behaviour of the local people and to recommend specific actions ...

The global warming and climate change caused by the anthropogenic activities is expected to increase. To address these issues, one key solution is the utilization of renewable materials such as biomass. Biochar, made from biomass materials is seen as a potential option to replace the fossil fuel-based reductants. Pyrolysis is the most common way of producing biochar. However, the physicochemical properties of biochar are significantly influenced by virgin biomass characteristics and the pyrolysis condition such as...

The threat caused by the use of generic carbonaceous material for carbothermic reduction to globe has increased. Millions are being invested to protect the environment due to the global warming. A new generation of reductants is urgently sought to mitigate the threat. Biochars improvement for different usages is currently looked at. One of the ways to produce biochar is pyrolysis. The temperature and type of atmosphere in the furnace used play an important role on the quality of biochar produced. The current paper...

Gypsum-based materials and products currently deserve special attention from specialists in many industries. They are distinguished by high environmental friendliness, manufacturability and safety. The construction industry is showing additional interest in their increased comfort, reduced sound insulation and thermal insulation. Obtaining crystallization structures directly from gypsum dihydrate using a non-hydration hardening scheme competes with many modern technological approaches. In the production of non-fir...

Pigments have important applications in various fields, such as colorants in food, cosmetic or textile industries and in biomedical applications. Dyes, especially azo dyes contained in wastewaters released from textile, pigment, and leather industries, are entering into natural waterbodies. Nonconventional biomass-based sorbents are the greatest attractive alternatives because of their low cost, sustainability, availability, and eco-friendly. In this work we use biomass produced from Black Soldier Fly exuviae for ...

Municipal waste is defined as waste from households and other sources, such as retail, administration, education, health, accommodation and food services and other services and activities, which is similar in nature and composition to household waste. Municipal waste should therefore include, inter alia, waste from park and garden maintenance, such as leaves, grass and tree clippings, and waste from market and street cleaning, such as the contents of rubbish bins and rubbish, with the exception of materials such a...

Among the existing methods of processing waste from coal-fired thermal power plants, little attention is paid to the problem of ash disposal with variable composition. During the combustion of coals, various chemical reactions occur as part of their mineral part, resulting in the formation of a new technogenic raw material that differs from natural raw materials in chemical and phase composition and has other technological properties. Using the example of a coal-fired power plant burning coals from six different d...

In this article, the authors analyzed the importance of recycling and reusing components in hydraulic drive equipment in line with the principles of the circular economy. The circular economy is also based on the principle of 3R, Reduction, Reuse, Recycling and attempts are being made to implement this principle in all areas, in order to protect existing resources, which are limited. Unlike the economy of consumer goods where in time was used the principle of linear economy, where after manufacture and consumption...

Among the support activities of any waste management actions, the optimal logistics processes are essential to assure time and cost-effective recycling scheme. Companies are recognizing that reverse logistics is a component of the total logistics management process that is growing in importance. Reverse logistics services are part of a trend toward incorporating environmental concerns into business philosophy and everyday business operation of manufacturing firms. An Environmental Management System (EMS) is a set ...

Nutrient-poor, sandy, sterile material from the post-mining sterile dumps such as those in the Maramures region (Romania) presents a challenge for plants. Sterile dumps are considered extreme environments for plants due to their unfavorable physicochemical properties. Phytoremediation has great potential to remove heavy metals from sterile dumps, and Indian mustard (Brassica juncea) seems to be a possible candidate species for this purpose. The potential of Brassica juncea seeds to germinate in a medium contaminat...

Improving the performance of the gypsum binder is possible by strengthening the gypsum matrix. The increase in strength is ensured by the introduction of a complex of mineral and chemical additives. The use of waste as components of such a complex solves a set of problems. The market is saturated with competitive and high-quality materials. Designed materials meet modern requirements. In addition, the problems of waste disposal, freeing up space, environmental protection and reducing the resource intensity of prod...

The Green Deal declares that climate change and environmental degradation means a threat to Europe and the whole world. In order to be able to respond effectively to the challenges in this context in the European Union, we need a new growth strategy that will transform the EU economy into a modern, resource-efficient and the economic growth is independent for the resource utilization economic. This research is a very timely issue in the livestock farming sector, because the livestock farming sector has a highest e...

Arsenic (As) and antimony (Sb) are elements with similar chemistry and geochemistry, but their environmental risk differ depending on the origin and degree of the pollution. As and Sb are both very toxic, particularly their inorganic substances in the oxidation states of III and V, which also represent the most common As/Sb forms in the environment. In environmental systems, As mostly occurs as the tetrahedrally coordinated, pentavalent arsenate AsO43- (in oxidising environment), and the trivalent arsenite AsO33- ...

The European Union (EU) is hurrying towards a climate-neutral economy, which includes increasing the use of renewable resources, including wood for heating. This direction means that the use of wood is increasing every year in the EU and beyond. The by-product of this activity, biofuel ash, is correspondingly increasing, so its further use should be considered a long-term issue. Energy producers face the challenge of making the best use of ash and often landfill it, thus moving countries further away from the EU D...

The worldwide olive oil sector is a strategic sector for olive oil producing countries due to olive oil nutrition and health benefits. With what is being produced of olive oil, it continues to produce wastewater with a significant environmental impact due to the high organic load and the biochemical composition of this wastewater, particularly, the presence of microbial growth inhibiting compounds such as phenolic compounds, which makes its biological treatment difficult. On other way, red mud, the main leaching r...