Browse

The foundry industry is a major producer of industrial waste, with used foundry sands (UFS) representing the largest share. While bentonite-bonded sands can be reused multiple times, sands with organic binders are typically single-use and are often landfilled due to limited regeneration capacity. Their valorization in construction materials represents an important pathway toward circular economy. This study evaluates the use of UFS from three different foundries, including bentonite- and furan-bonded systems, as p...

Cupola furnaces are still considered the most suitable furnace units for cast iron melting. Typical exhaust gas from a cupola furnace contains CO, SO2 and NOx. A relatively large amount of dust emissions are emitted from the cupola furnace. These are formed during melting in the cupola furnace. These emitted particles can contain CaO, FeO, Pb, MnO, MgO, SiO2 and Zn. Crushing and mechanical abrasion during charge preparation and charging generate particles, some of which are emitted immediately. Dust is also genera...

Briquetting is the pressing of dusty materials into pieces of the same shape and size. Briquetting can be done without a binder or with the addition of a binder to the briquetting mixture. Briquettes can have any shape, but the most common is the shape of a cylinder. The briquettes must be strong enough to eliminate the possibility of damage during transport and must be strong enough even at high temperatures. The briquettes have a regular shape, have the same weight, are more durable and easier to transport. They...

The paper deals with the ? + ? titanium alloys, due to their good properties such as low specific weight and high values of mechanical properties have found wide application as a construction material. Their disadvantage is high price and complicated production of the basic material - titanium but also alloying components (molybdenum, chromium), associated with high energy demand and undesirable effects on ecology. The inhomogeneity of the deformation with formation of deformation bands are typical for these alloy...

In the context of the recycling of waste from wrought aluminum alloys, especially food packaging, these were re-melted and cast into bars. The alloy thus obtained contains up to 2.0% Si, 0.8% Cu, 2.0% Fe, 2.5% Mn and other elements in tenths of %. The problem in its further processing is the porosity. Several methods were used to quantify it, of which the most accurate method was weighing. The disadvantage of this method is the requirements of the competence of the personnel as well as technical equipment. Other m...