Browse

Construction technologies are among the most critical in terms of negative impact on the environment. Burnt binders, primarily cement and air-lime, emit significant volumes of carbon dioxide and man-made heat. At the same time, a large amount of hydrocarbon fuel is also consumed for their firing. Therefore, to achieve sustainable development goals, the development of alternative binder formulations or innovative ways to produce traditional binders with low carbon emissions is necessary. The synthesis of low-carbon...

India generates over 500 million tonnes of agricultural waste annually, much of which is lignocellulosic biomass rich in silica, calcium, potassium, and carbon elements, which are favourable for catalytic applications. This study highlights the valorisation of abundant agro-wastes such as rice husk (up to 20% silica), coconut shell (74%-78% fixed carbon), sugarcane bagasse (45%-55% cellulose), and tamarind seed (rich in polysaccharides and carbon), as cost-effective and sustainable catalysts. Various preparation t...

Ash and slag waste (ASW) is a finely dispersed mineral material resulting from the combustion of brown and hard coal at thermal power plants. The involvement of ash and slag waste in industrial circulation is one of the effective ways to solve the issue of energy and resource saving. Utilization of ash and slag waste in industrial production will provide a solution to the environmental problem of environmental pollution by industrial waste - technogenic fine dust and harmful effluents by gradually reducing the rat...

Among the existing methods of processing waste from coal-fired thermal power plants, little attention is paid to the problem of ash disposal with variable composition. During the combustion of coals, various chemical reactions occur as part of their mineral part, resulting in the formation of a new technogenic raw material that differs from natural raw materials in chemical and phase composition and has other technological properties. Using the example of a coal-fired power plant burning coals from six different d...

As a result of the operation of thermal power plants used solid hydrocarbon fuel, ash and slag waste (ASW) is formed. ASW is a finely dispersed mineral material remaining as a result of burning brown and hard coal. The involvement of ASW in industrial turnover is one of the most effective ways to solve the issue of energy and resource conservation. The share of involvement of these types of waste in economic turnover in the European Union is about 98%, in China about 80%, and in Russia this indicator does not exce...

Solutions to the environmental problems associated with the burning of coal in power plants are in poor condition. One of the main problems is the continuous growth and accumulation of ash and slag waste (ASW). Ash and slag waste is a major source of raw materials for various industries. However, the degree of use of ash and slag waste at Russian thermal power plants does not exceed 2 million tons / year, with an annual output of 25-28 million tons. Modern methods of enrichment and processing allow the use of ash ...

In the article synthesis of structures of disperse systems on the basis of gypsum is considered. Such systems are necessary for receiving materials which exclude burning of raw materials on the basis of gypsum waste for the receiving binders. For them use a certain composition of raw mix. Selection of structure of compositions allows to increase properties of materials. Such materials are characterized by high strength. The process of formation of structure of a gypsum which is received by hyper pressing is studie...