Browse

The lack of new deposits with a rich copper content and the depletion of old deposits, as well as the need to comply with environmental requirements, raises the issue of the need to process the tailings of metallurgical industries. In Kazakhstan was accumulated significant stocks of tailings "Borgezsay" and "Staroye". The tailings reserves are estimated at up to 1 billion tons. Sample evaluation showed that the average copper content in the tailings is 0.15-0.2%. More than 1 million tons of copper are stored in th...

The priorities identified by the EU-s and national strategies and the main target areas promoted by the legal regulations concerning this area are precision food production, investments and developments, and - in the area of ensuring the resources needed to achieve these - a more efficient production, the improvement of sustainability and food safety. To achieve these objectives, the European Union has identified the widespread introduction of precision technologies using digitization technology in the food indust...

The development and efficient use of renewable energy technologies is essential to sustain access to clean energy for all. In developing countries, it is necessary to improve the efficiency of biogas production to contribute to the decarbonization of the energy supply. This study aims to assess the quality of biogas produced from household biogas plants in rural areas of Cameroon. Through snowball sampling, data were collected from forty-five (45) functional biogas plants across the five agroecological zones of th...

This article is focused on performing a SWOT analysis of agricultural waste management methods. This approach can be applied in the biogas technology strategic planning process in Ukraine, which can solve the issue of implementation of environmental guidelines for the development of biofuels and biofertilizers. The main factors that determine how digestate is used are its quality, local conditions, regulations, and documents. Fertilizing fields with digestate provides many advantages, for example: reduced demand f...

This research aims to develop a new strategy to valorize wasted COVID-19 masks based on pyrolysis to convert them into useful products. First, surgical and FFP2 masks were thermally pyrolyzed at temperatures of 450-550 ?C with the purpose of determining gas, liquid (oil) and solid (char) yields. At low temperatures, solid yield was high, while at high temperatures the gas product was enhanced. The highest yield of liquid was found at an operating temperature of 500 ?C in both surgical and FPP2 masks pyrolysis. The...

Biomethane and other renewable gases will enable to thrive on a fully renewable energy system. Biomethane has similar qualities to natural gas, so it can be injected into existing natural gas infrastructure or used as a biofuel for transport. Also, its use means a reduction in greenhouse gas emissions and dependence on fossil fuels. This work is part of the LIFE LANDFILL BIOFUEL project that aims to implement a cost-effective system based on new techniques to improve the recovery of landfill biogas and the product...

The paper deals with the possibility of obtaining zinc and iron from waste galvanic sludge, which arises during galvanic plating. Galvanic sludges, which contain more significant amounts of heavy metals, form wastes that are suitable for recycling. These arise during the treatment of wastewater from the operation of the electroplating plant. It is a mixture of metal hydroxides, mainly iron, zinc, chromium, and others. The sludge is sedimented in the reaction wells and, after sedimentation, is pumped into the sludg...

Waste and by-products from the food industry put pressure on the environment. FAO defined food losses as losses along the food chain between producer and market, while safe and nutritious food is thrown away as waste. About a third of the food produced is wasted. A significant amount of food is disposed of as waste, especially in developed countries, and this also means the disposal of resources used to produce food. Food waste is not only an economic problem, but also an environmental and moral problem. Food dive...

Ash and slag waste (ASW) is a finely dispersed mineral material resulting from the combustion of brown and hard coal at thermal power plants. The involvement of ash and slag waste in industrial circulation is one of the effective ways to solve the issue of energy and resource saving. Utilization of ash and slag waste in industrial production will provide a solution to the environmental problem of environmental pollution by industrial waste - technogenic fine dust and harmful effluents by gradually reducing the rat...

Uranium in situ recovery (ISR) is an effective method for extracting uranium from sandstone deposits. Many uranium deposits are characterized by the presence of associated metals: gold, platinum group metals and rare earth metals. For one of the uranium deposits in Kazakhstan, studies were carried out on sampling from productive wells at the ISR of uranium. An analysis was carried out for the content of uranium, rare earth elements, scandium, germanium, yttrium and other metals. For the study, samples were taken f...

As the planet-s population increases, pollution entering waterways increases, and the availability of non-renewable raw resource materials reduces. It is possible to reduce this pollution by constructing treatment wetlands, but these wetlands use significant amounts of natural aggregates. The question arises: is it not possible to replace non-renewable resources with recycled materials made from construction and demolition waste? This article examines the applicability of recycled building materials as filter medi...

Plastic in the environment poses significant problems for the present, as well as for future generations. The consequences and the exposure of living organisms to plastic pollution are not yet fully understand. The risks to health, environment and climate, due to the ubiquity and persistence of plastic are of great interest. The current study analyzes the perception of the Romanians regarding plastic pollution, in order to determine any pro-recycling behaviour of the local people and to recommend specific actions ...

The global warming and climate change caused by the anthropogenic activities is expected to increase. To address these issues, one key solution is the utilization of renewable materials such as biomass. Biochar, made from biomass materials is seen as a potential option to replace the fossil fuel-based reductants. Pyrolysis is the most common way of producing biochar. However, the physicochemical properties of biochar are significantly influenced by virgin biomass characteristics and the pyrolysis condition such as...

The threat caused by the use of generic carbonaceous material for carbothermic reduction to globe has increased. Millions are being invested to protect the environment due to the global warming. A new generation of reductants is urgently sought to mitigate the threat. Biochars improvement for different usages is currently looked at. One of the ways to produce biochar is pyrolysis. The temperature and type of atmosphere in the furnace used play an important role on the quality of biochar produced. The current paper...

Gypsum-based materials and products currently deserve special attention from specialists in many industries. They are distinguished by high environmental friendliness, manufacturability and safety. The construction industry is showing additional interest in their increased comfort, reduced sound insulation and thermal insulation. Obtaining crystallization structures directly from gypsum dihydrate using a non-hydration hardening scheme competes with many modern technological approaches. In the production of non-fir...

Pigments have important applications in various fields, such as colorants in food, cosmetic or textile industries and in biomedical applications. Dyes, especially azo dyes contained in wastewaters released from textile, pigment, and leather industries, are entering into natural waterbodies. Nonconventional biomass-based sorbents are the greatest attractive alternatives because of their low cost, sustainability, availability, and eco-friendly. In this work we use biomass produced from Black Soldier Fly exuviae for ...

Municipal waste is defined as waste from households and other sources, such as retail, administration, education, health, accommodation and food services and other services and activities, which is similar in nature and composition to household waste. Municipal waste should therefore include, inter alia, waste from park and garden maintenance, such as leaves, grass and tree clippings, and waste from market and street cleaning, such as the contents of rubbish bins and rubbish, with the exception of materials such a...

Among the existing methods of processing waste from coal-fired thermal power plants, little attention is paid to the problem of ash disposal with variable composition. During the combustion of coals, various chemical reactions occur as part of their mineral part, resulting in the formation of a new technogenic raw material that differs from natural raw materials in chemical and phase composition and has other technological properties. Using the example of a coal-fired power plant burning coals from six different d...

In this article, the authors analyzed the importance of recycling and reusing components in hydraulic drive equipment in line with the principles of the circular economy. The circular economy is also based on the principle of 3R, Reduction, Reuse, Recycling and attempts are being made to implement this principle in all areas, in order to protect existing resources, which are limited. Unlike the economy of consumer goods where in time was used the principle of linear economy, where after manufacture and consumption...

Among the support activities of any waste management actions, the optimal logistics processes are essential to assure time and cost-effective recycling scheme. Companies are recognizing that reverse logistics is a component of the total logistics management process that is growing in importance. Reverse logistics services are part of a trend toward incorporating environmental concerns into business philosophy and everyday business operation of manufacturing firms. An Environmental Management System (EMS) is a set ...

Nutrient-poor, sandy, sterile material from the post-mining sterile dumps such as those in the Maramures region (Romania) presents a challenge for plants. Sterile dumps are considered extreme environments for plants due to their unfavorable physicochemical properties. Phytoremediation has great potential to remove heavy metals from sterile dumps, and Indian mustard (Brassica juncea) seems to be a possible candidate species for this purpose. The potential of Brassica juncea seeds to germinate in a medium contaminat...

Improving the performance of the gypsum binder is possible by strengthening the gypsum matrix. The increase in strength is ensured by the introduction of a complex of mineral and chemical additives. The use of waste as components of such a complex solves a set of problems. The market is saturated with competitive and high-quality materials. Designed materials meet modern requirements. In addition, the problems of waste disposal, freeing up space, environmental protection and reducing the resource intensity of prod...

The Green Deal declares that climate change and environmental degradation means a threat to Europe and the whole world. In order to be able to respond effectively to the challenges in this context in the European Union, we need a new growth strategy that will transform the EU economy into a modern, resource-efficient and the economic growth is independent for the resource utilization economic. This research is a very timely issue in the livestock farming sector, because the livestock farming sector has a highest e...

Arsenic (As) and antimony (Sb) are elements with similar chemistry and geochemistry, but their environmental risk differ depending on the origin and degree of the pollution. As and Sb are both very toxic, particularly their inorganic substances in the oxidation states of III and V, which also represent the most common As/Sb forms in the environment. In environmental systems, As mostly occurs as the tetrahedrally coordinated, pentavalent arsenate AsO43- (in oxidising environment), and the trivalent arsenite AsO33- ...

The European Union (EU) is hurrying towards a climate-neutral economy, which includes increasing the use of renewable resources, including wood for heating. This direction means that the use of wood is increasing every year in the EU and beyond. The by-product of this activity, biofuel ash, is correspondingly increasing, so its further use should be considered a long-term issue. Energy producers face the challenge of making the best use of ash and often landfill it, thus moving countries further away from the EU D...

The worldwide olive oil sector is a strategic sector for olive oil producing countries due to olive oil nutrition and health benefits. With what is being produced of olive oil, it continues to produce wastewater with a significant environmental impact due to the high organic load and the biochemical composition of this wastewater, particularly, the presence of microbial growth inhibiting compounds such as phenolic compounds, which makes its biological treatment difficult. On other way, red mud, the main leaching r...

In Russia, turning to the circular economy concept is becoming a new wing of theenvironmental industrial policy. In most Russian regions, the necessity of recyclingindustrial waste co-exists with the challenges of municipal waste management. Thus,according to the official statistics, the amount of solid waste formed in 2019 reached7.75 bln tons, 55-60 mln tons being categorised as municipal waste. In 2010-2019,annual waste generation grew from 3.74 to 7.75 bln tons; about 15 thousand landfillsoccupy the territory ...

The work is devoted to the study of fuel ash as components of composite cements and building mixtures based on them. The use of bottom ash as raw material is an urgent problem. On the one hand, their use in production solves the issue of creating resource and energy saving technologies and increasing the efficiency of cements and concretes. The use of ash makes it possible to improve the properties of cements, bricks, products from aerated and heavy concrete, light aggregates, and the quality of road construction....

As a result of the operation of thermal power plants used solid hydrocarbon fuel, ash and slag waste (ASW) is formed. ASW is a finely dispersed mineral material remaining as a result of burning brown and hard coal. The involvement of ASW in industrial turnover is one of the most effective ways to solve the issue of energy and resource conservation. The share of involvement of these types of waste in economic turnover in the European Union is about 98%, in China about 80%, and in Russia this indicator does not exce...

Powdered waste sludge from the production of technical stone (TSW), produced by theTechniStone® Company (Hradec Kralove, Czech Republic), was surface modified withFe2+ and Mn2+ inorganic salts and then testified as a potential adsorbent ofenvironmentally important oxyanions (phosphate PO43-, arsenate AsO43- and chromateCrO42-) from contaminated waters. The surface modification in principle consisted increating a thin layer of hydrated Fe/Mn ions in reactive form on the TSW surface.Thanks to the change of the surfa...

The production of tiling and building ceramics is based mainly on the traditional system clay-silica-feldspar. However, in recent decades it has been demonstrated that some of these raw materials can be successfully replaced by various industrial wastes. Because of the high feldspars price a significant part of these studies was based on the usage of different alternative “amorphous” fluxes (as glass culets, TV cathode ray tubes, basaltic tuffs and others). Unfortunately, the addition of similar materials in amoun...

This work is a logical conclusion and generalization of results of two-year researchoriented to design the integrated technology of processing of diopside-containing ores towin the scandium compounds and get the wide spectrum of large-capacity products. Thetraditional technology of sulfuric uncovering of mineral raw materials is applied withinthe scope of this work. The technology of scandium compounds extraction with the useof impregnators, which are based on the macroporous carbons soaked with diethylhexylphosph...

The article focuses on the development of an industrial policy towards modernization ofthe resource-intensive sectors of Russian economy based on the principles of BestAvailable Techniques (BATs) and secondary resource recycling (recovery). BATs areregarded as benchmarks for the regulators as they draw up mandatory requirements forthe industry. This way industries would be motivated to introduce innovations andimplement modernization programs, while the regulators should set targets for such atransformation. The m...

The paper presents an LCA analysis of biomaterials with particular emphasis onpolylactic acid (PLA), as it is recognized as one of the most popular bioplastics on themarket. The results show that there are several factors to consider when selecting thebest decommissioning option for this type of material in line with the newly introducedcircular economy concept, which is the most desirable way to manage waste. A lifecycle assessment was carried out to assess the environmental impact of two wastemanagement pathways...

Solutions to the environmental problems associated with the burning of coal in power plants are in poor condition. One of the main problems is the continuous growth and accumulation of ash and slag waste (ASW). Ash and slag waste is a major source of raw materials for various industries. However, the degree of use of ash and slag waste at Russian thermal power plants does not exceed 2 million tons / year, with an annual output of 25-28 million tons. Modern methods of enrichment and processing allow the use of ash ...

The paper focuses on management tools that are used in project work leading to the construction of a new sorting line for municipal waste treatment. The aim of the article was to describe possible project management tools that are used in the management of the company and individual project phases and activities. The construction of a modern waste sorting facility responds to a change in EU and Czech directives. This area is so specific that it cannot be affected by the situation around the COVID 19 pandemic, whic...

Current context in which the emphasis is on promoting the circular economy, due to environmental policies, the food industry is constrained to develop new strategies to reduce food waste. The beer industry generates significant amounts of by-products that are often incorporated into animal feed or aquaculture. Yeast, the second by-product of the brewing process is generated in large quantities of 1.5 kg to 3 kg/100 L of beer produced. By using various purification processes, the residual brewer's yeast can be easi...

The largest manufactures of glass-ceramics in the last decades are related to the luxurious Japanese tiling material “Neoparies" and its replicas, developed in China. These marble-like materials are produced by sintering and surface crystallization of glass grains (frit) with original composition, placed in large refractory moulds (up to 1-2 m2) and the subsequent grinding and polishing of final panels in use. Since these products are manufactured in high volumes, the technology seems to be very appropriate for sy...

The materials used for the synthesis are modified waste raw materials in the form of slags (up to 70 % wt.) with addition of quartz sand and calcium fluoride. The initial batch is being melted at 1400 oC and then quenched in water. The resulting glass frit is milled bellow 75 microns, pressed into “green” samples being exposed in a next stage to thermal scanning at different temperatures with different heating rates, holding temperatures and times. In the framework of present investigation is presented analysis of...

Referring to many scientific studies, we all know that the general health of the planetEarth keeps getting worse. This fact forces conscious people to take action to fightdirectly against negative climate change or to promote ecological ideas among others.Many important changes in the world have been pushed through by a large group ofpeople. This implies that a conscious society will run households in environmentallyfriendly manner and work together to bring about change at the political level.This paper introduce...

Solid-state dissolution by sintering in the presence of Na2O2, a strong oxidizing agent, isreported in the present study as a preparatory procedure prior analysis by ICP-MS. Theadequacy of the combined procedure for the purpose of identification of potentialsecondary sources for REEs from difficult matrixes like, for example, mining wasteswas investigated. The method was applied to Certified Reference Materials (CRMs)with silicate-rich complex matrices, namely rhyolite, and granite. From each materialtwo sample we...

In the article synthesis of structures of disperse systems on the basis of gypsum is considered. Such systems are necessary for receiving materials which exclude burning of raw materials on the basis of gypsum waste for the receiving binders. For them use a certain composition of raw mix. Selection of structure of compositions allows to increase properties of materials. Such materials are characterized by high strength. The process of formation of structure of a gypsum which is received by hyper pressing is studie...

Waste recycling and the circular economy are among the most important issues in the European Union strategies. Because Romania has yet to meet many requirements of the European Commission?s policies, there have been opened several infringement proceedings against our country for pollution, wood management, and waste management. In May 2018, the European Commission sent a letter urging Romania to take major actions, such as: to close, seal, and ecologically restore 48 illegal landfills, and to comply with the judgm...

Sustainable waste management promotes less waste generation, reuse and recycling as well as waste recovery. This includes more intelligent methods and systems using for waste managing and processing. This paper presents a literature review regarding information about trends and possibilities for their application. Such technology has the power to completely displace conventional methods for the collection and transportation of household waste. However, a more detailed study the advantages and disadvantages of such...

Recently, biostimulation has often been used to remediate oily wastes. The use of additional bioaugmentation to increase biostimulation efficiency is widely discussed in scientific and practical literature. In this study, three methods of bioremediation for oily waste containing 177.8 g kg-1 of hydrocarbons were used: the first one included biostimulation with 66.6 % compost (w/w) made from municipal waste, the second one combined biostimulation and one-time inoculation by hydrocarbon degrading strains, and the th...

Over 3000 million tons of waste management are generated annually, out of which 25%-30% are Construction and Demolition Waste (CDW). Construction and Demolition Waste (CDW) is generating major issues regarding logistics, provision, and environmental impact. The European Commission, by its Waste Framework Directive, is requesting to increase the recycling rate of the weight by 2020. Since actual material separation techniques require manual quality control and sorting, which is dangerous because workers suffer from...

Recycling of asphalt is an important technological process applied worldwide. The strategy is to use as much milled, ripped or broke asphalt material into the new mixture. With the correct technological design, the maximum appreciation of this material is achieved. Due to the dominant use of asphalt mixtures in pavements, it is important to address the possibilities of their recycling. At present, a sufficient amount of reclaimed asphalt with good potential for further use is available in Slovakia. The problem is ...

The problem of reducing the negative environmental impact of soda ash production wastes using the ammonia method is relevant for all countries with such production. Therefore, the objective of this work was to summarize and analyze the experience of Russian researchers and foreign scientists in using existing technologies and methods of using soda ash production waste. The secondary use of this waste solves several problems at once. On the one hand, it reduces the negative impact of accumulated waste on the compon...

The aim of the research is to determine the social impact of the social enterprise Second Breath (Otra elpa) in solving the problem of the environment and social exclusion problems. The research is based on monographic method, document and statistical data analysis, analysis of social enterprises financial data and SROI analysis. Social enterprises have a dual purpose of solving social problems while generating and increasing profits ? they have responsibility to increase the social impact. Social impact is the ch...

The present study has been dedicated on the removal process of heavy metal ions from electrolyte solutions by using methods of electroflotation and subsequent filtration in a multi-component system with the presence of various surfactants of different nature. The research was conducted in a five-component system comprising ions of iron (II), nickel (II), copper (II), plumbum (II), and zinc (II) (the total concentration of metal ions is 200 mg/l). The research was conducted in a highly concentrated electrolyte solu...