Browse

The global economy needs significant changes that will reduce the high consumption of natural resources and the amount of waste generated. The idea of solving the circular economy proposes a path to solve such problems. Thematically, it covers social, political, economic and production issues. However, it should be noted that Circular Economy is not a ready recipe for solving the problems of depleting raw materials and the deteriorating condition of the environment. The basic premise of Circular Economy is a simpl...

Organic biopolymers represent a source of raw material for agriculture, because the composition of protean wastes provides enough elements to improve composition and rehabilitation of degraded soils. The main target of this scientific paper is investigating the development possibilities for various multicompound systems of biodegradable polymers and studying the effects of these complex products on the structure and chemical and physical characteristics of degraded or contaminated soils (having a poor level of org...

Decreasing fossil fuel resources and the growing attention to environmental causes increased interest in alternative fuels. Currently as a liquid alternative fuels apply: methanol, ethanol, biodiesel (FAME), dimethyl ether (DME). They can be used directly, or as components of mixtures with conventional fuels. Attempts have also been made to apply recycled fuels for diesel engines. As fuel recycling used oils extracted from waste made of polyethylene and polypropylene, oil recycled from used lubricating oils and li...

Packaging waste are one of fastest growing waste streams. Trends in waste generation show an increase in the volumes of waste produced in most countries and it is clear that the trend will continue. Currently, the management of packaging waste represents a major economic and environmental issue throughout the world. Therefore, the proper management, treatment and disposal of packaging waste becomes a pressing problem and a major environmental concern. Due to the fact that, the amount of generated packaging waste, ...

Wastewater management in Poland has a large potential for growth, however, like other countries has to face the new challenges related to the implementation of the circular economy. Innovative wastewater and sewage sludge treatment technologies can bring ecological, social and economic benefits but need to be supported by multi-criteria analyses. This approach has to contend with complex problems which is an important advance in the field of sustainable development and circular economy. This article aims to review...

Biochar attracts high scientific and practical interest because of several specific properties such as high sorption potential, fertilizing properties and ability to sequester carbon. In the present study, fertilizing properties of biochar made of chicken manure using different peak temperatures (2h at 300-700 ?C) in the rotating experimental 200L biomass pyrolysis plant were investigated. The following parameters were analyzed: content of biogenic elements (C, N, P, K), porosity and micromorphology, toxicity for ...

Municipal waste sludge belongs to a specific type of wastes formed in a process of mechanical, biological and chemical treatment of wastes. The sewage sludge, due to its variable content, constitutes a big problem with respect to optimum and safe sludge management. There is no single correct way to treat sewerage sludge. One needs to remember that the selection of the management method of the formed sludge is individual and depends to a large extends on the size of particular waste treatment plant. A subject of te...

Combustion wastes, such as fly ashes and slags, can be recycled primarily by using them in road construction. Nonetheless, their potential negative impact on the environment cannot be omitted. In practice, a number of methods are used for the leaching characterization of wastes, including the standards of the European and US Environmental Protection Agencies. The studies, the results of which are presented in this article, were performed for fly ashes and slags from coal combustion and for fly ashes from combustio...

Large amounts of sewage sludge are produced at waste water treatment plants and its disposal is an environmental problem. In this context and in accordance with the European Commission communication on the role of waste-to-energy in the Circular Economy, one of the objectives of Romania Waste Management-Strategy Plan for municipal waste, is incineration of the solid waste in dedicated incinerators, with energy recovery. When the incineration of the sewage sludge with energy recovery is chosen as the final path of ...

Underground coal mining plays an important role in the Polish economy. It is particularly important in the Silesia region, where coal is called black gold. Hard coal mines are the only source of income for thousands of families living in this region, and coal is the basic raw material for the production of electricity and heat. However, the exploitation of coal is inseparable from the negative impact on the environment. The basic ecological problems of mining include: mining damage, areas degraded as a result of m...

In recent years, the packaging market has become an important element of the economy of many countries. Its growing importance is associated with rapid industrial development, globalization, free transfer of goods and growing demand from consumers. Customer requirements affect the growing demand for more functional, colorful, light, flexible, ecological and environmentally safe packaging. Currently, the packaging has become an element that in many cases determines the demand for a given product. In particular, thi...

Plaster and composites made up of gypsum have been extensively used in building for various purposes. This work aims to study the use of polypropylene (synthetic polymer), Alfa (Stipa tenacissima ) and plastic waste as fiber in the manufacture of plaster and mortar plaster . In this study, a Superplasticizer was used to improve the fluidity of the plaster grout and mortar plaster. The optimization of the dosage of superplasticizer of plaster grout without fiber was determined based on the mechanical strength tests...

Recycling of spoil and demolition wastes is in general complicated process, that require quality processing technology connected with equipment designed for those purposes. During recycling is important factor perfect separation of spoil and demolition waste. Mainly separation of individual components of such waste as glass, plastics, metal parts, wood etc. From concrete, bricks, asphalt and similar construction material. Separated components are utilized by their type. It is necessary to not have dangerous admixt...

Product manufacturing continuously increases despite of complicated relations and unstable world economics. Various forecasts of development in industry show that in future the consumption should not decrease; on the contrary, it should slightly increase. This happens even despite of minimization in industry. But production processes present environmental charging for any company, acting in given sector. Treatment of waste is important for producers of all kind of waste, as well as for consumers that are producing...

Management of used electrical and electronic waste is a huge problem both on a local and global scale. The mass of collected electrowaste in Poland currently reaches approximately 5 kg per one inhabitant, and by 2021 it is to increase to 11 kg. According to estimates, only ca 30-40% of used electrical and electronic equipment in Poland is subjected to recycling. The rest is dumped at scrap yards or is illegally processed in the grey zone. Its considerable part is not processed in accordance with the standards and ...

One of the factors looked upon as an intrinsic constituent contributing to the technosphere as a true phenomenon in the development of the humanity is industrialization. Being powered by fossil fuels, it greatly accelerated urbanization and enabled enormous development in agriculture. The latter could not but be the reason for mass migrations of people to cities which in turn created another positive effect ?urbanization? and ?urban metabolism? coined by Abel Wolman in 1965. The model considered the flow of materi...

This paper considers a field of study related to green value creation in project management and specifically addresses the spectrum of green project managements in Kosovo case, and its impact in developing in general the Kosovo?s economy. During the paper, research questions are related to the role and the importance of green projects management in the country economy. The paper is based on the hypothesis that green project management plays important role in economic development, and also for future business devel...

Tailings are the waste product of mining industry which is usually deposited in the form of slurry. In the present study, laboratory experiments were performed to investigate the permeability properties of coal mine tailings. The investigation includes the compressibility and consolidation behavior of tailings material of different gradations upon application of incremental loads in large size hydraulic consolidometer. The samples were collected from open pit Tur?w Coal Mine in Poland. Remolded samples were manufa...

The property that influences the binding properties of slag is its hydraulicity. The term ?hydraulicity? is now used internationally to describe cements and other binders that set and harden as a result of chemical reactions with water and continue to harden even if subsequently placed under water. There are a few exceptions but these chemical reactions generally involve calcium, silica, and aluminum constituents that react with water to form a whole family of calcium silicate and calcium aluminate hydrates. The c...

In this study, the effect of physical, chemical and mineralogical properties of mine tailings on the microstructural, mechanical and durability properties of cemented paste backfill (CPB) samples prepared with normal Portland cement were investigated. Depending on the characteristics of the tailings, the difference in strength varied in the range of 6-22% between similar types of tailings. However, higher strength values about 61-86% were obtained when the fine material was removed from normal tailings. Porosity v...

In this study, the potential use of dam tailings (DT15 m., DT40 m., DT65 m.) of a copper mine for paste backfill material was investigated. Cemented paste backfill (CPB) samples were subjected to the uniaxial compressive strength (UCS) test at 7-14-28-56-90-180 days of curing ages. A total of 378 CPB samples were prepared at different binder dosages of 5.5?11.0 wt% by dry weight to determine an optimum CPB mixture with a target UCS of ?1.0 MPa over a curing period of 28 and 90 days. The strength development of CPB...

Microspheres, in other words aluminosilicate grains, are spherical particles of a small size classified as volatile ash fraction, so-called by-products of combustion, produced in the energy sector. In their construction, two phases can be distinguished - gas and solid. They are characterized, among others, by high mechanical strength, excellent thermal insulation properties and the ability to damp vibrations. It is estimated that the content of microspheres in fly ash is about 1-3%. There are two methods for recov...

In tanneries, only approx. one-third of the total mass of raw hides and skins is converted to finished leather, while two-thirds become either dissolved or solid waste. As part of the natural materials category, usually considered waste, leather fibers introduced into cement mortar panels play a fundamental role in construction due to both insulation properties and mechanical strength. Waste is introduced as a powder or filler or as aggregates in the concrete mix, with energy, economic and environmental benefits. ...

Even if the European Commission estimates that the end-of-life recycling input rate for coking coal is zero, some initiatives proved that coal could play a role in circular economy. Coal-fired power plants still play a significant role in electricity generation although a lot of renewables were developed. Coal combustion produces a relatively small amount of fly ash that is used in cement factories and a large amount of bottom ash that cannot be used in industry because its high carbon content. From this point of ...

The paper aim was to analyze the awareness of eco-labelling on the market, the need for information on the subject and also the type of date which may be considered to be included in the contented. In order to analyze the promotion degree of sustainable development through eco-labelled products, three case studies were analyzed: detergents, household appliances and textiles consumption. Considering that eco-labelled products have a low environmental impact throughout their lifetime, a long utilisation would implic...

One of the possible innovative ways how to process and utilize waste is its pyrolysis in the pyrolysis unit Pyromatic 250. The tests were conducted by Ostravsk? LTS, a.s. in laboratory conditions in the ENET Center of V?B-TU Ostrava. The input material was provided by MEVAPACK, s.r.o. Pyrolysis is a thermal decomposition of organic substances without access of oxygen. This decomposition produces three fractions ? liquid fraction, gaseous fraction and a solid residue. These can be used for heating of the pyrolysis ...

This paper presents a recent study regarding choosing and optimizing of the appropriate test methods to characterization and analysis of used oils from different sectors of activity, in order to evaluate the heavy metal content. In the first step, the samples preparation stage for metal analysis, a number of preparation methods have been tested and finally chosen as optimal, a microwave digestion method. For comparison the metals were analyzed by inductively coupled plasma mass spectrometry (ICP-MS) and atomic abs...

The flue ash and slags are accounting a significant part of thermal electric complexes waste, which operating on solid energy fuel. Most of this by-product does not find further application, accumulating in ash-disposal dump areas. Meanwhile, ash-and-slag wastes can widely use as raw materials for the production of building materials. Considering the world trend towards an increase in the share of waste secondary use, it is necessary to forecast their subsequent processing in Russia too. The purpose of work was mo...

Widespread use of natural stones has been a habit that has been going on for centuries. In addition to this widespread use, this material causes a significant amount of waste materials to be exposed during the processing of these materials. This is an economic problem in terms of both environmental pollution and disposal in waste materials. Therefore, the evaluation of these natural rock wastes is an important issue. In this study, it is aimed to recover the waste materials in natural stone workshops in Kahramanma...

The automotive industry is today a sector that significantly influences and at the same time develops other sectors of the national economy such as engineering, metallurgical, electrical, chemical or construction industries. The paper deals with the possibility of recycling recovery of selected components from vehicles over their lifetime. The authors focus on the components of external vehicle lights (front lights, rear group lights, front fog lights, side direction lights, branding light). It presents its own re...

This article discusses the possibilities of recycling waste material generated using 3D FDM or FFF printing technology and its use in the re-production of printed material. Additive technology is an increasingly popular method for the rapid design of components and machinery parts. It enables creating prototype components and assemblies relatively quickly. This makes it possible to search for the right design of a given component and to choose from several options (e.g. finding the correct shape in ergonomics). Ho...

Waste poses a growing problem is the contemporary world. The volume of household waste per resident continues to increase at a staggering rate. In line with the EU requirements, growing proportions of waste should be recycled, and Poland is expected to recycle 50% of its entire waste stream by 2020. Biological waste can also be recycled, but the recovery rate for this waste fraction is close to zero in Poland. The above applies particularly to biological waste from households. The quantity of OFMSW generated by a ...

The cupola furnace is a most widely used foundry furnace for melting of cast iron. Besides main product, cast iron, also secondary products are formed in cupola furnace. They have a character of secondary raw materials, or industrial wastes. Under the laws applicable to waste management, the waste producer is obliged to ensure their disposal without negative environmental impacts. Typical, and main secondary product of cast iron production is a cupola furnace slag. Its occurrence is approximately from 40 to 80 kg ...

Critical metals are those metals considered to be of fundamental importance for high-level industrial development. The definition of criticality derives, on the one hand, from the concentration of raw material sources in certain geographic areas, and on the other hand, the impossibility of replacing them with similar materials in the production processes. For a good management of raw material resources in general, and critical metals in particular, it is necessary to establish an eco-efficient strategy, to reinven...

Heavy metals ions can be removed from industrial wastewaters by numerous methods, such are precipitation, electrolysis, electrodyalisis etc. Sorption, i.e. adherence of a dissolved specie on solid sorbent, may be a cost-effective alternative to these conventional methods, in case a low-cost material is used as sorbent. Heavy metals are well sorbed by zeolites, clay minerals, char coal, carbon nanomaterials or numerous biopolymers. In this research, waste ceramic was used as sorbent for heavy metals (Cu, Pb, Zn). T...

Waste disposal and management is one of the urgent issues faced by mankind at the current stage of development. Waste car tires pose a significant threat to the environment, which makes their efficient processing particularly important, as the volume of this type of waste generated each year worldwide is estimated at more than 10 million tons, of which 1 million tons are produced in Russia. The paper provides a description and calculations for a process system that can be used to dispose of waste tires by their st...

The work presented in this article is based on the formulation and research of the mechanical and thermal properties of self-compacting concretes (SCC) made from the cement industry waste. This waste is of high alumina, finely ground and incorporated as filler. Mechanical testing in compression and in tension by splitting has been performed and that in the compare to control concrete specimens. To examine the performance of our concrete at high temperatures we have introduced two sample a concrete witness and the ...

The effect of using manufacture waste asphalt shingles (WMAS) to mineral-asphalt mixtures besides their utilization is to reduce the amount of the new bituminous binder added to hot mix asphalt. This publication presents studies on asphalt mixtures with an increased up to 4% amount of WMAS additive with the simultaneous use of 2 types of added paving bitumen, i.e. 50/70 and 70/100. The aim of the paper is evaluation of the basic mixture properties in a wide range of operating temperatures, as a part of the HMA tes...

Phosphorus, as one of the biogenic elements, is a compound conditioning the life of organisms, as well as plays an important role in the industry. The processes related to the recycling of phosphorus compounds and closing the loop of it, result primarily from the financial situation on world markets, the state of deposits of this element and the implementation of EU directives - Critical Raw Materials and Circular Economy. In the face of such conditions, the recovery of phosphorus from sewage sludge is an importan...

The interaction of permanganate ions with iron(II) cations as the basis for the synthesis of a composite magnetoactive compound has been studied. The reaction was carried out in an acidic medium, for this purpose an iron(II) sulfate solution was prepared with the addition of sulfuric acid. Condensation was carried out using an alkaline reagent after the redox reaction. The influence of the consumption of potassium permanganate on the magnetic activity of the reaction product has been experimentally studied. Theore...

Lignin as a by-product of chemical or biochemical processing of wood is usually burned to generate energy. However, its use as a source of chemicals and materials is considered more promising. Treatment of lignin with nitric acid is used in practice for its depolymerization. In our study, we investigated the treatment of Klason lignin with mixtures of concentrated nitric acid with dimethyl sulfoxide of various compositions. The effect of such treatments was evaluated by UV-Visible spectrophotometry of alkaline sol...

The utilization of different waste materials in concrete as partial replacement of cement or filler is having importance today, mainly on account of the improvements in the long-term durability of cement composites combined with ecological benefits. Fly ash (FA), Granulated Blast Furnace Slag (GBS), Silica Fume (SF) or High Reactive Metakaolin (HRM) is materials, which confirm to these requirements. However, a number of case studies with other waste materials are described in the literature as well. Copper slag is...

The present study was conducted to develop a method for utilization of serpentinized ultramafic rocks as mining waste using nature conservation technologies. In this method, the original raw material is thermally activated to obtain an active metastable phase. The goal of the study is to produce a granulated Mg-silicate reagent used to remove heavy metal compounds from solutions. Pentinsuo antigorite, Ozerki soapstone deposit in the Kostomuksha area, Karelia, Russia, and serpophyte from the Pilguj?rvi massif, Pech...

Cast iron, the oldest type of ferrous material for injection molding is also currently the most widely used material in foundries. In particular, this good technological properties (excellent fluidity, low tendency to shrinkage and their formation, low propensity for stress) as well as acceptable mechanical properties and good workability. Similarly, its physical properties and prefer it allows to produce castings with excellent specific characteristics, particularly heat and heat resistant, wear resistant and cas...

Many countries have no waste separation and mixed household waste accumulated mostly in landfills could pose serious environmental risk if landfills do not fulfill the requirements. The risk becomes much higher with increasing of hazardous components quantities in household waste (having hazardous properties and containing toxic chemicals). These include batteries, fluorescent lamps, chlorine-containing plastics, aromatic compounds and many others. Some hazardous waste are toxic themselves (waste oils) and some ar...

Ash resulted from coal burning in steam generator boilers of large power plants is an industrial waste which rises major problems for the environment, both in terms of large quantities currently generated and quantities accumulated over time in specific deposits. Concerning the fly ash in the flue gas and trapped in electrostatic precipitators the recovery is 100% possible as raw material for cement used in construction manufacturing. For bottom ash virtually no current use exists, the amount being insignificant c...

In recent years, methods of building evaluation from the point of view of their energy management, environmental footprint, etc. have often been applied in practice and also have been involved to not only Czech legislation. This is why the owners, operators and designers of buildings are motivated to design and operate energy-saving technical solutions, other drinking water consumption. This article discusses the possibilities of using wastewater at school facilities to reduce the cost of drinking water. The paper...

Sustainable and ecofriendly engineering requires the use of high amounts of recycled materials. Extensive amounts of building materials required for construction of roads facilitates the use of recycled old surfaces from the ecological and economical point of view. Reconstruction and development of new roads requires acquisition and processing of different materials such as: soils, aggregates acquired from unbound layers, concrete and asphalt surfaces, and particularly hazardous surfaces with tar bonding agent. Af...

In practice, the utilization of biosorption in the wastewater treatment systems at large scale is relatively difficult, mainly because the biosorbents have a short duration of use, and their regeneration is not always easy to achieve. Under these conditions, it is necessary to find other valorization ways of biosorbent loaded with metal ions, and a possible solution is their use as supplements for the remediation of anthropically degraded soil. In this study was examined the possible use of marine algae biomass lo...

The paper is a review of the current situation of waste management in Romania, focusing on solids recovery and recycling. Although some efforts have been made in the Romanian waste sector in order to reach the European targets within the deadlines, the national waste management plan update and waste prevention program implementation are delayed. At the moment, public awareness campaigns are being developed and implemented for recycling, without much emphasis on reduction. However, for now most of the waste ends up...