Browse

Feedbacks of soil ecosystems to climate change depend on its dynamics, thus soil ecosystems can directly and indirectly respond to climate change. Literature proved that warming directly alters microbial communities by increasing their activity. Also, climate change may also alter plant community, which consequently will impact indirectly, thus altering the soil communities that depend on their inputs. Thus, soil microbial community is responsible for a variety of soil provided ecosystem services, given their role...

Rhythmic climate changes determine the necessity to refer to long time series to detect low-frequency vibrations of climatic parameters and their influence on the growth processes in ecosystems. Dendrochronological research of pubescent oak (Quercus pubescens Willd) in forest communities of the foothill forest-steppe (250-350 m a.s.l.) and core samples of buried wood in comparison with modern and reconstructed climatic conditions was carried out. The purpose of work was to develop regional tree-ring chronologies f...

Cultural heritage represent the way of living developed by humans and it is passed through time to a generation from another. It will always be a part from our history, and if we lose it we will lose our identity, that is why its preservation is very important. Preserving the cultural heritage is always a hard task which implies a lot of people, starting with archaeologists, architects, geodesic engineers and builders. Each of these people have to work together in order to achieve an optimum result. Photogrammetry...

The CO2 removal from N2 using unconventional techniques based on different (various) membranes has known a significant interest in industry. Mixed matrix membranes combine the advantages of organic (easily processable and low cost) and inorganic phases (high selectivity, mechanical resistance, chemical and thermal stability). In this study, membranes with polysulfone matrix and MCM-41 (silica) as filler were obtained, characterized and tested. The mixed matrix membranes were prepared by casting method. The effects...

Large amount of methane trapped in post-coal extraction gobs and galleries in abandonment hard coal mines could be valuable carrier of energy. Methane produced by vertical well could be used to generate both, heat and electricity. However there are many problems with efficiency production of this methane. In dependence of geological structure, coal seams layering and technology used to drilling vertical boreholes from the surface, coal mine methane (CMM) production could be profitable or gives economic losses. Wit...

Development of new nanostructured carbon sorbents with desired properties is an important task. This corresponds to the carbon-containing sorbents, i.e. active alternative coals, because their usage puts forward increasingly stringent requirements to their strength and structural characteristics. Determination of active centers in sorbents, understanding of mechanisms, which form coal-mineral sorbents, allow to make process of synthesis controlled, and thus provides obtaining of carbon-containing sorbents with cer...

The area of the Upper Silesian Coal Basin is covered by many coal-waste dumps, which are the side effect of long-term coal mining on this territory. Unfortunately coal-waste dumps have negative influence on the landscape and they pose a threat to the environment and public health. The control of hazard is very difficult, because it is often underestimated by officials of local and regional administration. Many geoenvironmental databases are incomplete and the credibility of some of their sources is sometimes quest...

The design of the new protection scheme in the EforieпїЅs area was done based on yearly averaged incident waves from the dominant NE wave energy direction, with associated preferred coastline, which agrees well with a natural behavior of the present shoreline. The sand nourishments were constructing the new overall orientation of the computed shoreline, now in post-construction period corresponding to a new orientation of the coastline. The present work presents the functional effectiveness of the model simulation...

Hydrological process modeling is used to predict the contribution from rainfall-runoff, infiltration, groundwater recharge and evaporation. For this, information related to the interception and movement of water within the soils is needed which requires accurate soil hydraulic characteristics. However, field or laboratory measurements canпїЅt provide practical solutions for them. In this paper an indirect method, pedotransfer functions (PTFs), are searched in estimating the soil hydraulic characteristics for Kuruk...

Increasing the possibilities to utilize fly ashes from power stations is one of the major strategic directions involved in the implementation of the waste directive imposed by the European Parliament, enabling the protection of natural resources and a reduction of the amount of waste stored. Investigations into fly ashes from power stations indicate such waste contains rare earth elements (REEs) in much higher amounts than their average content in earthпїЅs crust. It has resulted in an increased interest in the ut...

Recent years have brought rapid development of GNSS and supplementary SBAS and GBAS systems. Depending on the needs of a given real-time positioning domain, users can obtain several meters (GNSS + SBAS) or several centimeters (GNSS + GBAS) accuracies. Active (local) geodetic networks belonging to GBAS, through the permanent nature of the work and constant satellite observations recording, allow achieving even greater accuracies through post-processing elaboration. The paper presents in a uniform manner the charact...

Starting to elaborate complex activities as projects or recurrent work requires taking into consideration the relationship between effort and benefits which may gain different forms depending on the field of intervention. The most widely used and measurable context is referring to the effort, qualified as costs, and the benefits, viewed as added value gained by stakeholders regardless of the form: tangible and/or intangible elements. The analysis of efforts and benefits calls for a holistic approach for evaluating...

After assessment of supply of ecological (EKO) and Premium quality products (PQP) of bee-keeping in Lithuania in 2012-2014 it can be seen that the number of ecological bee-keeping farms sequentially decreased by 2 farms from 2012 to 2014. Amounts of honey (34.66 t), (32.14 t), (33.56 t) collected during the research period were similar; quantities of all bee-keeping products decreased, except for pollen: in 2014 their quantity increased by 1.8 times, comparing with the quantity at the beginning of the research per...

This study focuses on petrophysical characteristics of flysch sandstones in the S-8 well section, located in the western part of the Polish Outer Carpathians (southern Poland). A number of laboratory tests were performed with application of the mercury injection capillary pressure, low field nuclear magnetic resonance, X-ray diffraction and pulse decay permeability measurements. Laboratory tests results were compared with the well logging interpretation. The laboratory analyses were conducted on core samples from ...

In many practical cases a composite column can be made-up as completely encased section or a concrete- filled section. In case of the composite steel-concrete members, the mechanism by which shear stresses can be transferred over the interface between the structural steel component and the encased concrete are adhesion, interface interlocking and friction, which are referred to as the natural bond. If the natural bond is not enough to achieve the required shear resistance there is the possibility of using mechanic...

The aim of this paper is to highlight the significance threshold between the kinematic and dynamic characteristics of sports technique key elements used in dismounts and the performances achieved by junior gymnasts in uneven bars events. This scientific approach is part of the formative pedagogical experiment associated to the postdoctoral thesis, at the midway point, in the end of the competitive year 2014. The following research methods have been used for this purpose: bibliographic study of specialized literatu...

In a market where footwear quality involves both health improvement and a better environmental protection, пїЅenvironmentally-friendly footwearпїЅ that minimizes environmental and health impact, guaranteeing a certain level of quality, may fulfill the requirements of today's consumer. Throughout their life cycle, from leather processing to the finished footwear, resulting waste and chemicals contained in some of the products may be harmful for health and the environment. In accordance to European law, waste from t...

The paper deals with processing the waste generated in paper recycling: initial waste of paper mill and sludge after wastewater treatment. The authors have analyzed characteristics of the waste of paper recycling generated in paper recycling plant near Kyiv (Ukraine): calorific value, moisture and ash content. The heating value of waste of paper recycling range from 6.5 to 24 kJ/kg and significantly depends on moisture content. Potential environmental impact depends largely on the physical and chemical characteris...

Carbonic materials are considered to be one of the most promising materials for hydrogen adsorption and storage; they have different applications and fuel cells technology may be considered the most important of them. By using metals for doping them, the adsorption capacity increases, thus approaching пїЅthe targetпїЅ of 6.5% weight ratio of H2 adsorbed in a substrate. A comparative research related to hydrogen adsorption capacity of poly-aniline (PANI) doped with Platinum (Pt), Ruthenium (Ru) and Iridium (Ir) was...

The purpose of the study was to present a case study on the parameters of photovoltaic systems installed on different types of roof. These research studies were conducted in the Laboratory of Renewable Energy at the University of Pite?ti.The case study analyzed the production of electricity for different photovoltaic systems, in terms of construction and placement.Mainly, the parameters of these systems were checked in the same weather conditions, such as: temperature, humidity, solar radiation and the unit of are...

In this paper consumer preferences for organic and traditional products are analyzed, regarding the level of consumer responsibility towards consumption which supports sustainable development. This study was conducted by a market research in Arad city, Romania, in 2016 on a representative sample, estimating the consumer preferences for organic products and traditional products. Arad county area is an important agricultural basin, with a rich tradition in traditional food products. These product categories are amon...

Reservoir description is rapidly increasing with the help of advancing computing possibilities. Although machines become more efficient, it is necessary to have accurate input data and plenty of data points to achieve reliable results. However, in the case of both old Romanian hydrocarbon reservoirs and some of the new ones, not too many data points are available. In this situation, no matter the computing power of the machine or the computing algorithm, detailed reservoir description is limited. This paper extend...

In the automotive industry, but also in other sectors, since the 80s one of the most used methods of reconditioning is welding. In this way, various technologies have been developed for each batch taking into consideration their characteristics and use. To observe and determine the correctness and economic impact of these technologies, the samples must be checked by different types of destructive and non-destructive standard tests.The most demanding destructive testing on samples is the fatigue test with alternati...

The objective of this paper is to present time and space analysis of drought occurrence in the agricultural regions in Slovakia. It considers the most important natural environment factors influencing the occurrence, duration and intensity of this phenomenon. The analysis of the occurrence of meteorological and agronomic drought was performed for the period 1961 пїЅ 2014. The results detect the importance of dealing with the problem of drought in Slovakia. Drought occurred every year during investigated period exc...

Numerical algorithms for constrained nonlinear optimization can be broadly categorized into gradient-based methods and direct search methods. Gradient search methods use first derivatives (gradients) or second derivatives (Hessians) information. Examples are the sequential quadratic programming (SQP) method, the augmented Lagrangian method, and the (nonlinear) interior point method. Direct search methods do not use derivative information. Examples are Nelder|Mead, genetic algorithm and differential evolution, and ...

The parameters of extraction from aqueous solutions into the organic phase of iron, aluminum, manganese and titanium are determined from the pH and concentration of the extractant when they are extracted with oleic and naphthenic acids, as well as olive and sunflower oils. The values of the thermodynamic functions of extraction equilibria with the participation of carboxylic acids and natural oils are taken as the basis for constructing the extractability series, which makes it possible to determine the thermodyna...

When coal preparation, particularly suitable for coking created considerable amounts of sludge. Most of the technological operations is taking place in water environment. Raw sludge at a time when technology was not yet at such a high level as today and emergency overflows were deposited in tailing ponds. This is practiced on coal districts in the Czech Republic and Poland. The purpose of this section was to analyze the possibility of another flotability of coal sludge deposited in settling ponds of company EKO CA...

Passive houses primarily belong to the category of buildings with very low energy consumption for object heating. Their overall energy performance is affected by a number of indicators, including in particular: solution of building structures and details on boundary of building heated space, characteristics of used materials and the choice of opening fillings. In the initial design phase of the building it is necessary to ensure maximum utilization of solar gains and internal gains from people and appliances. Howe...

A conveyor belt in regular operation is negatively influenced by a number of factors. This negative influence is the result of coming in direct contact with the transported material, which frequently causes serious damage and reduces belt lifetime. The scale and type of this damage depends on many factors, such as a beltпїЅs physical and mechanical properties and its design. The properties of the transported material and the design of the feed point are also of considerable importance [4]. When the damage is cause...

In microgravimetric survey it is sometimes necessary to take into account the terrain correction, which eliminates the influence of terrain relief from the measured values. The accuracy of its calculation depends on the quality of mapping terrain relief in the form of a digital terrain model. For mapping is usually used geodetic data from additional measurements carried out using a total station or GPS, and more recently Terrestrial Laser Scanning (TLS). Additional measurements increase the cost of survey, especia...

This work discusses the creation of a river flow generator, which uses as an inputs temperature and precipitation data. These input data could be an artificial series of mentioned climatic variables (especially in context of climate change studies), but when assessing the present-day state, measured data may be used too. For this purpose hydrological model and machine learning model is used. In order to increase the accuracy of the flow generation, the authors have designed and tested various variants of data driv...

This paper aims comparisons of data obtained by different methods of data acquisition. Will present aspects of quality data obtained with Leica total station ultra 802, with GPS equipment from Leica 1200 Series and comparison of these data with altimetry data obtained using LIDAR technology. Measurements were made in ?ag - Par?a area, of Timi? county, on a length of approximately 4 km and over a width of 50 meters left and right from the center. Using LIDAR technology we can realize 3D models, can be detected and ...

In this work, the filamentous fungus Aspergillus niger was tested for its compatibility with different media compositions, other plant growth promoting microorganisms, and plant growth stimulators. As a first step, a medium selection was carried out employing as a criterion the P-solubilizing activity of A. niger. The highest soluble P concentration of 136,92 mg/L and 394,93 mg/L was registered on Potato-Dextrose and Czapek-Dox medium in conditions of submerged and solid-state fermentation processes, respectively....

Fast increase of Earth population during the last decades raised a serious problem when it came to providing fresh and good quality food (mainly vegetables) in big quantity over a short period of time. Due to relatively long lifecycles of plants when growing in gardens or fields, the best solution consisted in using greenhouses. Greenhouses proved to be a very important solution since they are capable of operating regardless of local environments if minimum requirements (heating and water) are provided. By offerin...

In Bratislava, Capital of Slovakia, there is a huge development boom on the edge of the Old City, where is risen up a new complex down town of the city. The territory specified on the edge of the first ring called Chalupkova Centre will have around 20 high-rises with different function and there will be more than 20,000 parking spaces. At present, the operation of the territory is at the border of the saturation flows. There will be a new bus station and begins to reflect on the new tram routes. The extensive trav...

Emissions of industrial plants contain a considerable quantity of different chemical components. These include ash, soot, smoke, sulfates, nitrates, oxides of metals and other solid components. The size of dust particles emitted by enterprises are defined by the process environment and the composition of raw materials used. Particle fractions less than 10 microns (PM10) and less than 2.5 microns (PM2.5) can penetrate to the upper and lower respiratory tract. Both short and long-term exposures of fine dust particle...

Isotopic composition of noble gases and other volatiles (CO2, N2) from minerals of corundum-bearing rocks with isotopically ultralight oxygen from Khitoostrov deposit have been investigated. The studies were conducted on Finesse mass-spectrometry system [1] using step heating in temperature range from 200пїЅ? to 1400пїЅ?. The following minerals were investigated: corundum, amphibole, garnet, staurolite. For the same samples, differential scanning calorimetry and thermogravimetry curves have been obtained. The firs...

Nowadays, we can notice a phenomenon of extreme diversification of the categories of complex and colorful wrapped food products that attract more consumers on local or world market. The current trend in the modern consumer orientation is for new food products that satisfy both nutritional and sensorial requirements and cause the appearing of new products on the food market. However, we must say that food has a complex composition, sometimes indiscernible to consumers and associated with an improper diet, poor in n...

The research claims that carbonate reservoirs are different from terrigenous one with the ability significantly to improve the filtration and capacitive properties under the influence of hydrochloric acid solutions. Acidic compositions, containing not only the hydrochloric acid, but also various kinds of additives, such as demulsifiers, dispersants, stabilizers (converters) of iron and many others. They are usually selected by experience in practice. Its main function is to simplify the extraction of the oil emuls...

The ever-increasing demand for heating in different sectors, along with more preventative regulations of greenhouse emissions, has forced different countries to seek new alternatives to heat buildings such as district heating system (DHS). DHS is best suited to areas with a high building and population density in relatively cold climates. District heating, considered as the most efficient method for building space heating, has been dramatically developed over the past decades. This paper approaches the description...

The methodology of computer simulation of nonstationary fields of temperatures, concentration and pressure is considered. The computer model of non-stationary heat exchanging process is researched. Decentralization interaction of the active parallel agents is the base for computer implementation. Agents are defined as abstraction of elements of physical system where the modeled processes proceed. Process characteristics are calculated on the base of information on non-stationary fields of temperatures of a wall of...

Energy efficiency, in building industry, is one of the most important criteria for the selection of the material, the type of construction or the technology of construction. Not only is the amount of energy consumed by the building during its use is taken into account. The amount of energy needed to extract, process all materials used in it, the consumption during construction process and after it, energy expenditure on demolition or the reuse of preserved components are also important. Prefabrication is a process...

The preserved complex of forest stands of the beech up to the spruce forest vegetation level mainly of primeval forest character within the National Nature Reserve ZadnпїЅ Po?ana has been a part of the core zone of the Biosphere Reserve Po?ana within the project пїЅHuman and BiosphereпїЅ of the UNESCO organisation since 1990. Also these forest stands are being influenced to a great extent by abiotic and biotic harmful agents, which negatively affect their health and further development. Since the late 1990s, the N...

The soil tillage system through the intensity of soil mobility influences its physical state, the capitalization of the fertilization system applied, and together they condition the water conservation in the soil, respectively the development of maize crop. The arable lands damaged by intensive conventional pratices are a cause of the loss of carbon and water in the soil, to a larger or smaller scale, according to soil, season and especially the stage of damage of soils. The purpose of the paper is the research of...

The atmospheric pollutants emissions derive mostly from industrial and social activities and represent a serious risk to the ecosystems and for the human health. At European level, in the recent years there has been a significant reduction in anthropogenic emissions, but certain atmospheric pollutants continue to harm the human health. The suspension particles represent a complex mixture of very small particles and liquid, with an extremely diverse composition. Along with nitrogen, the particulate matter pollutant...

This paperwork is based on the data emerged from a conducted research related to a moisture influence on ignition sensitivity of air-methane gas mixture. For the purpose of this demarche it were used method of signal processing approach as it is data filtering and mathematical transform of the experimental data. In the first part of the paper, it was presented the spark test apparatus used for the experimentation and the results of the experimental data obtained during the tests with mixture air-methane and moistu...

This article presents an analysis based on the research conducted by the authors in the rural area targeting the preferences for a certain type of investments depending on local conditions and value system. How manufacturers decide on the type of crops, endowment degree of fermentation is determined by the potential opportunities identified and estimated in a subjective manner, often under an archaic system of values. The consequences of such decisions are found in the reduced production, insufficient needs and th...

Construction of water storage lakes, necessary for different uses (irrigation in agriculture, water supply for population), implies sizing of the facility so that it can permit the transition of flood flows that could happen on the river where the water storage lake is positioned (built). Such a water storage lake is dimensioned, according to normative standards, for a flood which corresponds to a certain probability calculation. Taking into account the fact that frequently from the moment of finishing the constru...

Evolution and development of landslides is influenced by a number of natural factors (soil, geological substrate, relief, climate, vegetation etc.) and anthropogenic factors (deforestation, overloading of land with constructions, inadequate meteoric waters drain, artificial undermining of slopes-embankments for roads etc.). In this paper we propose to analyze the causes of landslides that affected the county road DJ 585 located in Visag area, Caras-Severin county limit, and also to issuing technical solutions for ...

The balancing devices in cable tension, DEC's, linking the extraction vessel (SKIP) and cables binding devices, DLCпїЅs, and are designed to equalize the tension in cables of extraction plant (multicable). The paper presents a new solution design of the screw-nut mechanism of initial tension cable for the uniformity tension and horizontal positioning of the rocking mechanism. The extraction vessels cables are attached to those by means of binding devices and equipment. Binding devices and equipment should be safe ...