Browse

A structural analysis on the used in processes of open cast mining formula is made and some functional dependences are deduced. This shows the relation between optimal speed on temporary rail ways and the productivity of mounding excavator – single – bucket and with many buckets.A structural analysis on the used in processes of open cast mining formula is made and some functional dependences are deduced. This shows the relation between optimal speed on temporary rail ways and the productivity of mounding excav...

This study aims at understanding the activity of northern branch of the North Anatolian Fault. The AvcД±lar and adjacent areas were chosen as a study area as the Marmara Earthquake had caused severe damage and fatalities in Avcilar. We carried out a fieldwork in the area and found out surface fractures. We then integrated in to our map existing seismological-seismic and damaged distribution data. We propose that the damage to the W of Д°stanbul, especially in Avcilar was caused mainly by re-activation of younger f...

The flyrock from blasting operations can harm, damage or expose the workers of a particular worksite or the dwellers of a wider area of extractive activities (quarry, mine, construction site) to damage risks; in some cases even death might be caused, too. There are certain and different ideas and theoretical approaches regarding the evaluation of causes and the implementation of flyrock prevention measures to be taken, as well. This implementation, however, in practice requires a more delicate and rather professio...

Paste backfill is composed of a mixture of mine tailings, process and/or fresh water for the desired solid-water consistency and hydraulic binder to ensure a target mechanical resistance. This paper presents some studies undertaken on the strength development and deformation behaviour of paste backfill mixtures made from a Turkish zinc mine tailings. A series of laboratory experiments was conducted to determine the strength and deformation properties of paste mixtures with binder content ranging from 4 to 7 wt\% a...

General environmental problems generated during blast activities in open pit mining are ground vibrations, air pressure, fly rock, dust and poisonous gases and fumes. In some cases, these problems can be the source of some continual disagreements (fear, right and unrighteous complaints, etc.) on inhabitants living close to a blast-based production in a quarry as well as damage on the buildings situated nearby. In this study, the ground vibrations produced by blasting operations performed at a limestone quarry were...

Regional development problems constitutes in present days, one of the major issues of European Union activity. As consequence, a country which strives to the European Union member statue must integrate in the spirit of European realities, showing an outstanding interest to prepare its ground in the spirit of Union’s requirements for her member’s countries, developing a coherent and active regional policy. Therefore the work follows to identify the main action directions of European Union regarding the regional...

After a period of more than four decades of centralized management, Romania has decided to return to local autonomy principle, in this way transferring major and concrete responsibilities to the local administration. Currently 17 municipalities, each with more than 150.000 inhabitants, have benefited from capital investment programs financed mainly by EU and IFI for rehabilitation of their water and wastewater infrastructure. In Romania, out of 263 urban localities, around 230 are considered small and medium-sized...

The transport represents one of the main sides of the mining technological process, the preponderance of the expenses of this activity reported to the expenses for producing a tone of useful mineral substance extracted from the underground reaching almost 40\%. A good transport system presumes to assure a permanent continuity with passive time cycles having minimum values and functioning in well correlated cascade dimensionally and capacitive speaking. It’s obvious that a transport flow is performing if starting...

The first version of ASMIв„ў is created in the period 1975-1980. we offer the third version of ASMIв„ў entended for modern PC operation with Windfows and integrated with popular program systems, such as AutoCADВ®, ExcelВ® and WordВ®. In all three versions the creators are following the ideology of ASMIв„ў: 1. this is a specialized system directed mainly to markshader insurance of open mines; 2. the algorithms, big part of wich are original reflect the success of the markshader and geodetic science, technology and ...

Nickeliferrous laterite is a source of ferronickel alloy extracted by a pyro-metallurgical process. Laterite deposits found in Greece are mainly secondary depositions and their nickel content is about 1\%. Beneficiation of the run of mine ore is limited to the +1 mm fraction by magnetic or gravitational processes and its effect is rather unsatisfactory due to the insufficient liberation of the nickel bearing minerals. The mineralogical structure of the ore consists mainly of hematite nodules (pissoids) and quartz ...

This study analyzes the possibilities of anchorage and reform of a sterile deposition resultant from copper mining activities from around the Brad-Romania mining area. Because this sterile deposition is out of service from about 8 years, the solutions we had to propose according to work of biologic recultivation must stabilized the sterile deposition. After consolidation the danger of rain and snow melting waters will diminish. The main purpose is to avert pollution of area environment factors and concurrently acc...

In this study, diagnostic leaching and ultrafine grinding as pretreatment step ahead of two-stage cyanidation of KaletaЕџ ore were studied to shed light on the refractory characteristics of ore. The overall gold extraction of 93\% was achieved in two-stage cyanidation of ultrafinely ground ore suggesting the presence of readily recoverable gold (74\%) and slowly reacting gold (19\%) in the ore. Diagnostic leaching approach provided information into the cause of the refractoriness of the ore. The findings of diagno...

In this study, flotation concentration of Trabzon-KayabaЕџД± Massive Sulphide ore was investigated. The effects of particle size, reagent concentration (collector and depressant) and agitation speed on the recovery of copper were studied. The results have shown that the ore responded poorly to concentration by flotation with low efficiency of seperation of copper minerals from sphalerite and pyrite. Changing the flotation conditions i.e. decreasing particle size to >99\% passing 38 $\mu$m or increasing the concent...

The cartographical projections are the representations of the terrestrial surface on different projection plans that can bew cylinder and con. The important problem for representing these projections is to reduce the characteristic deformations of each projections. The problem that is analyzed refers to an assessment of the points transpositions from a sphere surface on a plane in conditions of maximum efficiency.

Criteria for assessment of geodetic networks, measurements and digital territory models are discussed in the paper. Methods for accuracy verification and actuality verification of planned geodetic networks with local use, cadastral plans and maps situation and their digital models are shown with examples. Technology for geodetic networks and measurements accuracy assessment is offered.

An opportunity for investigation of dam deformation processes based on periodically determined spatial chord length is discussed. The main priorities of using such geodetic determinations in comparison with the mass applied in the practice coordinate differences are shown. A method for dam investigation based on the deformations-theory and on the finite elements method is proposed.

The subjects of deformation monitoring are either natural objects such as ground deformation due to mining exploitation, withdrawal of oil or underground water, active tectonic plate boundaries, glacier movements etc., or the man-made objects such as dams, bridges, tunnels and other complex engineering structures. The results of deformation monitoring are directly relevant to the safety of human life and environment protection. The bridges are very important subjects in the field of infrastructure management. Stab...

People have always used metals and minerals and products made from or with minerals in a nearly infinite number of ways. With the increase in population and real per capita income, the demand for mineral commodities is likely to rise in the future.Mineral Processing in the mining industry can be defined as the economic recovery of a valuable commodity from a mineral deposit. Mineral processing operations produce significant amounts of solid and liquid wastes. As the quality of mineral deposits diminishes, raw mate...

The activities in mine factories are unthinkable without a process of earth mass transportation. The expenses for the transport and related to it additional works (repairs, road construction, etc.) reaches to 40-50\% from general expenses for production of one ton of useful minerals. For the adequate esteem of the efficiency of the motor transport the directions of the objects periodically have to decide the problem with its rational use. The real loading of the tip-lorries could be used as many indicator. This in...

In this work the main goal is to design and develop a expert system, with special focus on water management and quality. It is remarkable the high quantity of information and knowledge patterns implicit in large databases coming from the monitoring of any system or dynamical environmental process. For instance, historical data collected about meteorological phenomena in a certain area, about the performance of a wastewater treatment plant, about characterizing environmental emergencies (toxic substances wasting). ...

Considering the benefits of intensive agriculture in our time and the negative impact of chemical fertilizers and pesticides against the environment, usage of PGPR (plant growthpromoting rhizobacteria) like biofertilizers is one of the most promising biotechnology used for growing the primary production with less quantity of chemical fertilizers. The usage of PGPR may be an alternative to organic fertilizers and can reduce the pollution and preserve the environment in the spirit of practicing an ecological agricul...

“The Black Sea Coastal Way Rehabilitation Project” which started seven years ago in order to relief in traffic flow in the Eastern Black Sea Region of Turkey and presently continues to complete their constructions. The project involves the rehabilitation and shortening of the present motorway and hence the construction of new tunnels and riprap material for filling the sea are required in some places. This paper involves one of the blast based tunnel excavations, which is performed for “Yoroz Tunnel” situa...

The paper presents the present state in Romania of the environment from the point of view of the air quality and of the water quality. The policy of the European Union regarding the environment as it is reflected in the Treaty of the European Community focuses on a durable development by including the environment protection in the communitarian district policies In order to fulfill these objective high quality standards for the environment should be imposed. There should also be observed some principles such as вЂ...

The basic geodesic activities in the preparation of the Project “Reconstruction and Electrification of the Railway Line Plovdiv – Svilengrad – Greek/Turkish Border” have been described. The problems in the development of the working geodesic base, creation of a three-dimensional model, cadastral map, and the detailed structural layouts of the territory in question have been discussed. Specific attention has been paid to the procedures in changing the purpose of the agricultural and forestry territories and...

The methods and compose geodesic Database from creating available structures are discus. The describe methods and realization structures and them programs decision are defined. The examples at resalable program systems for menage and analyses geodesic database are showing.

Existing conditions, aims and tasks of investigation and geodetic methods is described. Obtained displacements for the period 1966-2004 are analyzed. Corresponding conclusions are drawn.

In this paper it is presented the basically geodetic methods for defining and following of land movements and land slide. The classic geodetic method anticipates defining of horizontal and vertical deformation in some points buried in the body of land slide. The deformation is defining with precision angular and linear measurements and with precision leveling from stabile points of primary geodetic nets (the microtrigonometric and the level net). The terrestrial photogrametry is used in the defining deformation of...

Choghart iron ore deposit is located 13 kilometers northeast of Bafq and 120 kilometers east of Yazd. In order to model the deposit and estimate its reserve, 331 input data gained from 125 boreholes were used. Iron grade was selected as the major regional variable on which the present research has focused. All of the available data were changed to two-meter composites so that statistical equalization could be reached. Studies indicated that Fe input data had single - population characteristics and obeyed a natural...

A hydrochemical study is conducted in the Faria basin / NE of the West Bank to define water types and to determine hydrochemical parameters of the aquifer system. More than 150 water samples were analysed, which covered all springs and wells. The physical and chemical properties were determined. The major cations Ca2+, Mg2+, Na+ and K+ and the major anions HCO3-, Cl-, SO42- and NO3- were analysed. The minor constituents of SiO2, F-, Br- and PO43- and the trace elements Cu, Cd, Fe, Mn, Cr, Zn and Pb were determined...

When working on a GIS project or developing a Web application an alternative and cost-effective way to distribute these data to users is to use ArcWeb Services. It is a delivery system, which reduces costs of spatial data maintenance and data storage and enables easy access to up-to-date data. The paper describes the setting up of an interactive map server of Slovenian geological spatial data using ArcIMS implementation (ESRI program package). In the last decade numerous geological data of more than 40 different g...

This paper presents investigation of the environmental effects of ground vibration and air blast induced by blasting in various quarries located at Turkish Republic of Northern Cyprus. Within the scope of this study, scaled distance components have been recorded for two shots at the BeЕџparmak Company, two shots at the G\"urdaДџ Company, one shot at the Levent Mosaic Company and one shot at the ArpalД±klД± Company, totally 6 shots at different times. And also, ground vibrations and air blasts produced by these sho...

After a period of more than four decades of centralized management, Romania has decided to return to local autonomy principle, in this way transferring major and concrete responsibilities to the local administration. Currently 17 municipalities, each with more than 150.000 inhabitants, have benefited from capital investment programs financed mainly by EU and IFI for rehabilitation of their water and wastewater infrastructure. In Romania, out of 263 urban localities, around 230 are considered small and medium-sized...

Landslide Hazard Zonation (LHZ) is a method to evaluate the risk where there is the potential for landslides. Therefore, many terrain factors affecting the landslides have been exposed firstly. The factors contributing to the hazard in an area can usually be identified, results of the investigations frequently being presented as a landslide hazard zonation map indicating zones of similar risk of the occurrence of a landslide. North railway track is one of the areas susceptible to landslides in Iran, consist of sev...

Landslides have a large quantity of the natural disasters world-wide, this trend will increase in the future due to increased urbanization and development. The creation of maps of susceptibility, danger and risk is very important for engineering geologists, geomorphologists and city planners. Although several techniques are available for landslide risk investigation, reliable susceptibility mapping of landslides is very difficult due to their complex nature. Techniques for susceptibility mapping such as; determini...

A bottom ash and a fly ash sample from Unit 1 of the Agios Dimitrios Power Plant, Northern Greece, were subjected to a one stage leaching procedure (Synthetic Groundwater Leaching Procedure – SGLP). The lignite burned in it derives from the Southern Field Mine from the Lignite Centre of Western Macedonia. The Relative Mass Leached (RML) for ten major (Al, P, Ca, Mg, K, Fe, Na, Si, S and Ti) and forty eight trace elements (Li, Be, B, V, Cr, Mn, Co, Ni, Cu, Zn, Ga, Ge, As, Se, Rb, Sr, Y, Zr, Nb, Mo, Ag, Cd, Sn, Sb...

Designing and building a geological server is a very important and responsible task. The successful implementation of that task is based on the right selection of Internet technologies, middle-tier scalable server, map server and a proper platform. Making all these technologies to work as one in a perfect synchronization will be a serious proof that we have one modern Geological server.

The forest ecological systems in middle Siberia play an important role in supporting the structural carbon balance and the balance of mineral materials. These ecological systems are able to significantly self-regulate and establish a balance of substance circulation in the environment. This is particularly important in conditions of serious anthropogenic forest disturbances in the south of mid-Siberia. In a number of areas of the Angara-Yenisei region, including pine forests in regional oil bad in Covicta, intensi...

The influence of temporary rail ways over transporting ability through the mining railway net in open cast mines is researched. A functional relation between optimal speed of temporary ways and the transporting ability is found.

As it is well known, the process of extracting from the underground the reserves of useful mineral substances by using mechanical methods had been extended mainly regarding the energetic coal a series of countries in the period of 1970 ? 1990, that generated many actions of conception and manufacturing of some specific equipments being remarked mainly Germany, England, Poland, ex - countries of Soviet Union, etc. The main idea consists in choosing and correlating dimensionally, capacitive and functionally some com...

This paper presents the results from the study of heavy metals contamination of paddy soil of the Ko\vcani Field (Eastern Macedonia), an area with extensive agricultural production. The soil of the Ko\vcani Field is supposed to be polluted by heavy metals due to mining activities and acid mine drainage from Zletovo-Kratovo and Sasa-Toranica ore districts. This was supposed by the fact that acid mine drainage and direct input of Zletovo Pb-Zn mine effluents of pH 3.4 with mean Pb concentrations of 66 mg l-1, Zn at ...

Designing and building a geological server is a very important and responsible task. The successful implementation of that task is based on the right selection of Internet technologies, middle-tier scalable server, map server and a proper platform. Making all these technologies to work as one in a perfect synchronization will be a serious proof that we have one modern Geological server.

A review and analysis of the different methods used for processing of geodetic data, depending on the applications is made. Here is considered Least - squares estimation method, dispersion analysis, spectral analysis, and filtering and is made an analysis of their effectiveness in using for different geodetic problems (applications). We made suggestions for methods using in common processing of different types of data.

Which is the rigth place of the Mine-Geological information technologies where there are most applicable? The correct answer is – everywhere, to every mine engineering works and production activities. Creating a correct geological model, deposit modeling, management of the everyday extractin or beforehand simulations for recultivation, etc. – all these new technologies and way of working are based on one modern principle.

The optimization of the coal winning process using different mechanical and alternative cutting techniques using appropried mathematical models is an up to date reserch methodology. In the paper, two kind of such models are presented, first using deterministic analytical relations evaluated by numerical calculus, and the second using Monte-Carlo simulation of the process using experimentally obtained test data to generate random values of intrinsic rock parameters and logic diagram for the functional connections b...

Social structure has been changed by developments in Science and Technology. Encountered problems on community which organized level being high, solution of problems of qualities and quantities have been different. Using computer being widespread in production and developments in communication technology solved many problems which to suppose his solutions is impossible but at this time, they created new complex problems that to concern about topics of specialization and occupation [SelimoДџlu, 2004]. Modern manage...

In this material offers mechanical model that builds on the basic technological characteristics of the system rock – frictional pipe anchor bold (FPA). In the presentation, the anchor is divided on the modeling elements. Their size is determined from the physical model that describes combined anchor-rock system work. Key words: mechanical model, system anchor-rock, stress field

Hydrogeological investigations of groundwater are based on large amount of qualitative and quantitative data which demands a complex approach to modeling and organizing information into some logical data model, useful on local, regional and national level. For that purpose at Geological survey of Slovenia we established a Database of hydrogeolocial data to define groundwater bodies of Slovenia in which all significant data of groundwater bodies, aquifers and hydrogeological objects are available.The main objective...

In this work in terms of the ideas of the zone of inelastic deformations generated around stress concentrators in heterogeneous rock mass as a quasi-plastic block medium having a microstructure, rigorous criteria of rock mass stability are obtained that naturally take into account mining-geological and geomechanical conditions. Theoretical ideas added to the problems of underground structure stability permitted to provide an explanation for paradoxical, in the view of classical representations, numerous cases of m...

A modification of the conventional adjustment model is proposed. Like this, the velocity of the drift is introduced as an additional unknown quantity. An argument about the priorities of the suggested approach, in comparison with the used at present methods for gravimetric measurements processing is done. The possibilities which the new adjustment model provide for an optimization of the whole measurements program in a gravimetric network are analyzed.

An ongoing geologic and geophysical investigation in the deep-water Black Sea, offshore Bulgaria reveals conditions suitable for hydrocarbon accumulations with giant field size potential. This potential lies within the buried offshore extension of the Paleogene Balkanide fold belt and its adjacent Eocene-Oligocene foreland basin, in water depths of 500-1,700 meters. With the benefit of onshore geologic studies and new offshore seismic acquisition and processing, it is possible to recognize and evaluate the basic e...