Browse

Drilling by the submersible drilling hammer is one of the progressive technologies in drilling of boreholes and it is currently being widely applied method for the drilling works. Use of the submersible hammers disposed in the borehole - drilling directly above the drilling tool - entails number of advantages. The most important is the energy loss prevention. Submersible drilling hammers are gradually and successfully replacing the surface hammers, which have been widely used for many years in Slovakia and in the ...

Climate change caused by the accumulation of greenhouse gases of anthropogenic origin in the atmosphere is one of the most acute problems of our time. Over the past two decades governments of different countries and international environmental organizations combine their efforts for confronting global warming. At the same time, companies are faced with steadily increasing expectations of stakeholders that require clear, consistent and transparent information about greenhouse gas emissions. This determines the need...

This contribution provides a prefabricated elements constructive system, which guarantees definite features and energy saving, with integrated energy performances and structural behaviors. First, we considered the requirement framework, identifying which were the indispensable energy, structural, environmental and product performances. These choices were then examined through UNI PdR13, which is today the benchmark for Sustainability in Italy. Secondly, the market scenario of this system was defined, identifying t...

The basic purpose of magnetic separation is to separate the ferromagnetic elements from the magnetically inert component. In difficult conditions of mining activity, due to high costs of repair or replacement of damaged machine elements, prevention related to the correct operation of machinery and equipment of production lines is particularly important. Safety systems of feed material (electromagnetic separators) are designed for installation on construction of a conveyor belt to clean the transported material fro...

Assessment of mining impact on natural environment is relevant, since open mining, the storage of mining and processing waste, the metallurgical processing of the concentrates produced are accompanied by aerosol mining-induced pollution of the atmosphere and natural environments as a result of the release of fine mineral particles. According to satellite observations for 17 years, aerosol mining-induced pollution and the state of the vegetation cover in the Kola mining complex (Russia, Murmansk region) have been s...

In this paper, we consider such dangerous disasters as wildfires. Wildfires are global sources of gas and aerosol emissions into the atmosphere and considered as one of the main factors of environmental risk, causing disbalance of the climate system of the Northern Eurasia and the planet as a whole. Taking into account terrain features and characteristic spatial scale of the Northern Eurasia, we suggest to use a satellite monitoring system for urgent detection of fire origins and assessment of volumes of hazardous...

Authors describe the novel approach to boost the scientific data analysis performance with the data storing schema for distributed scientific research systems. This approach optimizes the workload on storage nodes and enhances the computation performance. Managing the enormous output of scientific research systems is expected to be the most technically difficult part of all recent projects producing Petabytes of imagery data. For example, NASA's EOSDIS produces several Petabytes of uncompressed data per year and w...

The modern major project on creation a unique, scientific, educational, and technological Center of space researches and technologies was launched on the base of Engelhardt Astronomical Observatory (EAO) of Kazan Federal University in 2008. In EAO educational activity in the fields of training and retraining of specialists is conducted; scientific and practical training courses take place on the following educational programs: space geodesy and remote sensing, astronomy, radio astronomy. It should be noted, curren...

Rare Earth Elements (REE) are crucial for modern technologies and renewable energy application, while there is a high risk of supply. REEs have been identified as critical raw materials for the development and the European Union economy competitiveness. Currently, China dominates the market of REEs production and refining. However, there are several REE containing materials not being properly addressed. The ENVIREE project, funded by the ERA-MIN programme, is focused on REE supply for Europe, by addressing the exp...

Pigmentary retinopathy or Retinis pigmentosa (RP) is a hereditary degenerative disease of the visual cells responsible for capturing light (cones and rods). Although it is a condition rarely encountered, the number of people suffering from this disease has risen to over 1 million in the last few years. Starting from the encouraging literature, this paper aims to present the etiology and classification of RP and one original plant extract, obtained from sea buckthorn (Hippophae rhamnoides), a product with major pot...

The activity of drainage during various seasons and the impact of meteorological conditions on drainage runoff in different seasons (winter, spring, summer and autumn) during the period of 1969-2009 are reviewed. Particularly important indicator of drainage activity пїЅ dynamics of water runoff. The present article analyzes the change of climatic conditions in the object, Central Lithuania, following the data of Kaunas Meteorological Station; and it is determined that during the period of 1969-2009 the lowest quan...

Air pollution became a real public concern for countries all over the world. Increasing anthropogenic emissions of nitrogen oxides (NOx) can cause a substantial increase in ground-level ozone, which is a secondary air pollutant produced by photochemical interaction of NOx and volatile organic compounds (VOCs), through a complex set of reactions under the influence of solar radiation. Ploiesti is one of the main cities in Romania, which is facing with anthropogenic atmospheric emissions that result especially from ...

The introduction of the Minister of HealthпїЅs Regulation of 20 April 2010 on the quality of water intended for consumption by people resulted in the duty of testing the condition of water delivered to a consumer. In effect, a change in water quality during its distribution was noticed in many sites. There are many causes of this phenomenon, e.g. water supply system building material, quality of water coming out of the treatment station, failures and processes taking place in the system, for this reason, it is ver...

In recent years Gda?sk had sustained economic and social losses due to severe flash floods coming down from moraine hills. The first flood occurred in July 2001 and the second in July 2016. Both events were caused by intense and long rainfall characterized by different from each other rain intensity in time. Among other GdanskпїЅs streams the Oliwski Stream has the most extended flood protection system consist of 15 small retention reservoirs. Due to its extensive flood protection system and lack of severe flood e...

Study case is situated in Caras Severin County. Every sediment transport model application is different both in terms of time and space scale, study objectives, required accuracy, allocated resources, background of the study team etc. For sediment transport modelling, it is necessary to know the characteristics of the sediment in the river bed. Therefore it is recommended to collect a number of bed sediment grap samples. These samples should be analyzed in terms of grain size distribution.To solve theoretical prob...

The Permian sedimentary succession exposed in Sirinia Basin (South Carpathians, Romania) provides a record of mixed siliciclastic-volcanic rocks. The siliciclastic rocks are represented by conglomerate, sandstone and claystone, which are grouped into nine lithofacies (Gmm/mg, St, Sh, Sm, Sr, Fl, Fr, P) occur in a predictable order as repeated fining-upward cycles. Groups of associated facies are arranged into five distinct architectural elements (gravel channels, ribbon-channel, sandy channels, laminated sand shee...

This paper consist of creating a conceptual model of the first aquifer identified in the central area of Bucharest. The conceptual model was developed in three stages: the spatial schematization, the parametric schematization and the hydrodynamic schematization, based on data from geotechnical boreholes. Mathematical modeling of groundwater flow requires knowing the entire system, from the geological and spatial distribution of permeable geological structures to hydrogeological parameters of the aquifer (hydraulic...

The Rutbah formation is one of the most important reservoirs at the Saban field east of Syria, it can hold up to 40 % of the hydrocarbon volume at the area. The Rutbah formation sediments are belong to the early Cretaceous (late Neocomian age). The Rutbah formation sediments at the Saban field are subdivided according to the well logs accompanied with sedimentological data into two parts from down to top which are; the lower Rutbah and the upper Rutbah. The lower Rutbah forms a good quality reservoir with typical ...

Green roof or living roof is a roof of a building that is partially or completely covered with vegetation and a growing medium. Sedum species are low-growing succulent plants that can grow rapidly when water is available yet also survive long periods without water. Green roofs are becoming increasingly popular in many countries, but in Kosovo the use of green roofs is a new practice. The aim of this study is to determine Sedum vegetation characteristics on extensive green roof in Kosovo urban areas, influenced by ...

Interfaces of rocks with different mechanical properties influence on seismic stress field appearing in rock mass during the earthquake. This influence may increase seismic load applied to underground objects located near the interface, so it should be taking into account in seismic analysis of the structures. For this aim the problem of elasticity theory about stress state of the ring supporting an opening in the half-plane, which is united with a half-plane of another material is considered. Lengths of seismic w...

The primary aim of earthquake resistant design is to prevent building collapse during the seismic event, but severe earthquakes have a low probability of occurrence during the life time of the structure, therefore in contrast to traditional structural design in earthquake design, structures are permitted to work in post-elastic domain under seismic load. It would require a large lateral stiffness of the structure and an expensive resisting system to design the building to have an elastic response. Because of these...

The paper highlights the seismicity of the Strei-Hateg depressionary system. This system is situated in the western part of the Southern Carpathians, and consists of two intermountain, post orogenic basins, Hateg basin and Strei basin. These two basins are separated by a threshold. The seismicity is characterized by moderate magnitude with a maximum magnitude of 4 (Mw) (8 September 2013) and by the presences of the seismic sequences. In the area are known two seismic sequences, one in 2011 of 14 earthquakes of 2 t...

There are already numerous attempts to scientifically relate seismicity to a number of precursors in seismologically active areas. There are also attempts to identify phenomena that may trigger the seismic events, especially the high magnitude ones, such as active tectonics or the Sun пїЅ Earth пїЅ Moon gravitational interactions. When studying the ROMPLUS Earthquake Catalogue [1], the time variability of seismicity in the Vrancea zone, characterized by both crustal and intermediate depths earthquakes, the results...

Sustainable design attempts to be perceptive to the environmental impact of the building project at each construction stage by evaluating the site, the embodied energy of the selected materials, as well as the proper construction techniques, adjusted to the local conditions. Moreover, physical hazards (flammability, corrosion) and/ or health hazards (toxicity, irritations) of the materials are especially important not only for the construction workers, building owners and occupants, but also for the environment, c...

The seismic investigation of buildings is in accordance with two important Romanian Codes, P130/1999 and the seismic design code P100-2013. Criteria for selecting buildings proposed to be seismic investigated/monitored are numerous: seismic zoning of the territory; data on structural system and types of existing structural systems, depending on the material pre and post-1940; the effect of vibration other than from the seismic vibration; location-site; seismic stations and sensors, sensors position/location in a b...

The proper selection of the structural steel grade has to take into account a lot of factors and, for structural steels, a minimum ductility is required so that the material shall have sufficient fracture toughness to avoid brittle fracture of the tension elements at the lowest service temperature. In this paper we present the methodology for selecting the toughness of structural steel with respect to EN 1993-1-10: 2003 and SR EN 1993-1-10: 2005. Establishing the steel sub-grade for the steel main girders of a rai...

The two-dimensional profile curves created by Barton are often used in geotechnics for the determination of the rock joint coefficients. These two-dimensional profiles of solid surfaces show self-affine properties, i.e. they are scaled differently in x- and y- directions. Similarly, the three-dimensional reliefs (3D) of solid surfaces are scaled differently in z-direction in comparison to x- or y-directions. Therefore, the vertical sections of surface reliefs (two-dimensional profiles) are self-affine curve (self-...

Currently, the design and development of the user interface is important, but at the same time, an empirical process. Despite the attempts of many authors to give recommendations on the correct design of the interface appearance, there are no recommendations on how to relate the domain and interface, and build the latter without losing the sense of the user's activity. Unlike the existing approaches in this area, the proposed approach to the semantic design takes into account the activity of the user in the domain...

With the decrease of production in conventional oil and gas resources, increasing attention is turning toward nonconventional oil sources to relieve the pressure caused by the lack of conventional stocks. Heavy oil and natural bitumen as two of the alternative sources are perhaps the most readily available to meet short- and long-term needs. As is well known, the physical and chemical properties of heavy oil and natural bitumen are quite different from conventional oils. Major differences include low content of th...

The air traffic in the European Union and operation of individual airports, including service provisions, belong among the most unregulated industries. Free market economies result in keen airport competition, and especially those airports are affected that compete for customers of the same catchment area. Passengers prioritize airports not only because of the quality of the services offered and provided but passengersпїЅ priorities also reflect presentation strategies of airports, as well as their communication a...

Usually the frost heave of soils causes damages to low-rise buildings, road paving, and pipelines. However, a few years ago unusual deformations of a building supported by 18 meter piles were found. It was a cooling house designed for fish storage at the temperature of -22пїЅ-24пїЅ?. The building was 8,4m high; its plan dimensions were 24?42m. To protect the ground against the frost penetration a 0,9 m layer of light gravel under the concrete floor was filled and an electrical heating system under it was set up. T...

There is an increased concern about the constantly mounting amounts of sewage sludge due to different factors, in particular population growth and urbanization. Therefore, besides common sewage sludge disposal, innovative solutions are required, such as by energy recovery. The present research aimed at evaluation of the energy potential of sewage sludge from a Romanian municipal wastewater treatment plant. A viable and sustainable solution for the removal of sludge is the "transfer" of this so-called waste, in pel...

The exploration of shale oil is still the actual problem in the Western Siberia. The Upper Jurassic Bazhenov bituminous strata are widespread here. The Bazhenov strata is perspective shale formation because it has the high quantity of organic carbon and considerable thickness. This region is the most interesting for exploration of shale oil. The object of research are located within the Koltogor-Urengoy paleorift and its fraiming structure. The reconstruction of the tectonic and thermal history of Bazhenov formati...

Today, we have to follow the principle of sustainable development in relation to the surrounding environment. Bearing in mind the mandatory requirements for energy efficient buildings, special attention should be paid to the strategy of conduct. In this respect, the key factor is the ability to visualize not only the building but also individual elements, including: cross-sections of walls, ceilings, roofs, presentation of potential materials before the necessary work is carried out. Such a state project is possib...

The paper explores the possibilities of defining geometry and its behaviors with using ESO digital tools in an integrated structural and architectural design. It is an response to the current needs geared towards sustainability, combining ecological and economic efficiency. The first part of the paper defines the Evolutionary Structural Optimization tools, which were developed specifically for engineering purposes using finite element analysis as a framework. The development of ESO has led to several variations wh...

Authors examined particularities in shelf oil and gas production. Social-economic aspects have been revealed of consequences during underwater production and pipeline transportation of hydrocarbon crude. Volumes of losses from emergencies at pipelines and platforms were analyzed with differentiation of principal world shelf oil and gas production regions. Loss volumes were estimated for the North-Eastern European region with reference to components of hydrocarbon production and transportation systems. Methodical a...

In paper the most important input variable revolutions (rpm) of drilling tool is analyzed by utilization of Shewhart control chart. The revolutions of drilling tools have a double meaning, in term of the performance and economics. Two measured variable namely pressure force F (N) and speed of rock drilling v (mm.s-1) closely related with revolutions. In general, control charts are used as a proven means to improve the qualitative parameters of production and in the prevention of errors, discrepancies in production...

In water bodies of the Upper Silesia and D?browa Basin region (Southern Poland), shore processes should be considered on a micro scale owing to the small area of these lentic water bodies, especially when compared to large bodies of water around the world. Intensive geomorphological changes manifest themselves as abrasional forms (e.g. cliffs, terraces), which are found in small numbers on the banks of reservoirs impounded by dams and are more numerous within flooded mineral workings. On the other hand, accumulati...

In Poland, beavers have colonised all types of valley landscapes пїЅ from late glacial coastal lowlands and lake districts in the north of the country to upland and mountainous ones in the south. Studies of geomorphological effects of their presence in valleys of small rivers in the Oder and Vistula River basins have confirmed the results of earlier observations conducted in forest zones of North America and Europe. In Polish territory, effects of the changes related to the beaversпїЅ activities have been studied ...

In this study, the geomechanical properties of the heterogeneous limestone rocks in ??rnak coal mine roof cemented at cracks and the effect of the qualities of cementing paste fill on strengthening by the different silica fume paste were investigated. For this purpose, uniaxial compressive strength, point load strength, impact resistance, friction with Abrasion Loss, Impact Abrasion Loss (Los Angeles Assay) tests were managed following the cemented 50x50x50mm blocks. Even the physical properties; density, water ab...

Maozhou watershed is a highly urbanized watersheds in southern China that is a typical watershed in ChinaпїЅs rapid urbanization. Changed land use/cover(LUC) within the watershed changed the flood response, that requires the model parameter updating with the LUC changes induced by urbanization to have an accurate flood forecasting. Flooding in Maozhou watershed is serious, which was aggravated by increased urban land area within the watershed. Accurately forecasting the flood of Maozhou watershed is imperative, bu...

This paper is focused on the simulation using Matlab/Simulink software? of the Photovoltaic (PV) cell/module/array for a better understanding of the power generated under different atmospheric conditions (irradiance and temperature). One diode model and double diode model of a PV cell are also shown in this paper. The simulations could be performed considering both models, but here only the PV caracteristics for one diode model will be shown. The resulting model uses a friendly interface considering the Function B...

A starting point for roadheader robotisation (understood as a fully autonomous machine) is to automate the cutting process, which is the basic working process carried out by such machines. In case of boomпїЅtype roadheaders, it consists in automatic control of the movement of cutting heads to ensure that the face surface can be worked with optimum process parameters. This will guarantee high drilling efficiency (drilling advancement) and lower energy consumption, reduced dynamic loads and elimination of overloads....

In a large competitive environment in which today foundry exist are more important is production of castings with high quality and high economic efficiency. Therefore, the use of 3D software and simulation programs is necessary in the pre-production stages. In them it is possible to design, construct and simulate filling and solidification of castings in the foundry mould, design ingate system and feeder system. A properly designed and calculated ingate and feeder system is the first prerequisite for producing of ...

The ground serves as an ideal heat source for monovalent ground-coupled heat pump (GCHP) systems. This paper presents a working methodology and develops an analytical model for evaluation of the ground thermal conductivity and the borehole thermal resistance using a thermal response test (TRT). Additionally, this paper uses the Earth Energy Designer (EED) simulation program developed on the basis of the line-source model to calculate the fluid temperature for a case study of the ground heat exchanger according to ...

This article examines formation and simulation of interferences in new licensed frequency within communication in NGA 4G LTE networks, which are source of disturbing of radio and television broadcasting. This also use for increase of awareness about interference problematics in access network. This article is dealing with sources of interference within licensed zones, its creation and also provides theoretical and applied possibilities of its technical solution between licensed zones. Article provides experimental...

Many oil and gas low permeable reservoirs have been stimulated to enhance productivity. Acid fracturing is one of the commonly used well stimulation treatment in carbonate formations, such as limestone, dolomite, and chalk. Carbonate reservoirs are good candidates for acid fracturing since strong acids such as hydrochloric acid react easily with carbonate. The acid reacts within the fracture to create a differentially etched surface that will maintain a conductive pathway. Habitually, a pad fluid is injected ahead...

The article presents the results of research on basic parameters of screw-type device designed to lift off, mix, and re-suspend sediments which build up on the bottom of the oil tank. When crude oil is stored in tanks, invariably solid particles and heavy paraffin sediments are deposited. To prevent any sediment from building up on the bottom of the storage tank and to ensure all oil requirements are met, screw-type devices or propellers which are installed at the first horizontal ring of a tank are basically used...

The aim of this study was to develop a rapid and relatively simple protocol for the simultaneous quantitative determination of the main volatile compounds acetoin and diacetyl found in yogurt. Both these substances are the common flavor components in cultured dairy products. Acetoin/diacetyl determination is important because its concentrations represent criteria for the quality appreciation of the lactic starter cultures. This proposed method employs the reactions of acetoin and diacetyl with 1-naphthol and creat...

The article presents the results of tests of self ignition high speed engines used in fishing boats and vessels. The reduction of specific fuel consumption and exhausts toxic emission was possible by implementing preliminary fuel treatment that takes place directly in the fuel injector. containing catalytic material. The reduction of the nitric oxides emission level in exhaust gases has been obtained by means of preliminary fuel chemical treatment which is based on the use of heterogeneous catalyst and spirally sh...