Browse

Water resources are the national wealth of any country and one of the basic foundations of its economic development. The growth of cities, rapid industrial development, intensification of agriculture, a significant expansion of irrigated land and many other factors make the problems of rational water resource management more difficult. The activity of the mining and chemical enterprise mainly leads to the soil and the water pollution. After the closure of the enterprise, it is necessary to develop a remediation pr...

In the small catchment area of RediuValley has initiated some investigation concern to the possibility of practice drip irrigation for horticultural plants. It is well known that soil from slope lands have high susceptibility to erosion processes. Plants grown on slope land are also predisposed to longer droughts as a result of the partial infiltration of water from snow melting and after high intensity precipitation. The studied Rediu water basin has a length of 8 km and a surface area of the 11 km2. Surface unde...

Study of the hydrogeological responses during seismic waves' passage let us to take insight on hydrogeological and tectonic processes inside the Earth and their interactions as well. Earthquakes may cause both postseismic and coseismic changes of the water level. As a rule, static postseismic hydrogeological responses are typical for the near field of earthquakes, whereas dynamical postseismic or/and coseismic changes correspond to the far field. However, the exact parameters responsible for the water level respon...

The possibilities to develop health resorts and balneological or spa and thalassotherapy centres in the Baltic Sea region countries have not yet been fully analysed. The water resources in Latvia have been used historically and still in nowadays could be used for different types of treatments more effective. The core questions for a medical tourism development are products, demand and service quality. It is marked in the Baltic Sea country (Lithuania, Latvia, Estonia) development strategy that environmental manage...

History of water supply and sewerage systems dates back to ancient times, since water is a scarce resource needed for life. Worldwide, it is possible to find the remains of various drinking water pipelines. Various ways of dealing with wastewater are also documented. This article deals with water management in the Czech Republic area. The topicality of the text is supported by the fact that not all residents in the Czech Republic are currently supplied by drinking water from public water systems and the proportion...

Through this study and researches carried out in this paper, it was attempted to highlight the need for the re-equipment of the treatment station in a town with 6000 inhabitants due to the high exploitation costs, the lack of a constant discharge that satisfies the local water requirements and the quality of the drinking water currently distributed fully meet the applicable drinking law. This article presents also the exploitation optimization (from the energy point of view) of a drinking water treatment plant, ba...

The soil is one of the most complex natural systems of Earth. By its features, the soil reflects the impact of clime, flora, fauna, human activity and topography on bedrock from which the soil was formed during various periods of time, being considered an indicator of environment evolution. The soil degradation means the quantitative and qualitative diminishing of the current potential yielding capacity of soil that contributes to the production of goods and services as a result of some unfavorable evolution, by d...

Wave equations for the dynamics of the ontogeny of linden leaves growing near a highway with intensive movement are given. The way of the analysis of parameters (lengths, width, perimeter and the area) for engineering biology and bioindication of the surrounding air environment is shown by oscillatory indignations of leaves. On the roadside, choose a tree and measure the distance from the middle of the root neck to the curb perpendicular to the road. In each zone a group of not less than 5 leaves is selected, mark...

Computational modelling of hygrothermal performance of building materials has become very popular in recent decades as it is able to provide reliable results in a very short time. However, the accuracy of obtained results depends on various factors, the knowledge of material properties in particular. Even if many sophisticated experimental methods have been developed for that purpose, being able to provide reliable data, there is still one aspect which often remains ignored. According to the literature review, the...

The paper describes the deployment of an open-source Crismapp platform. It is a WebGIS 2.0-based solution designed primarily for crisis management purposes. As part of a cooperation with the University of Bergen, Crismapp was implemented for the purposes of monitoring the earthquake in the Norwegian region within the European-wide observation network EPOS. HTML5-based application reflects the WebGIS 2.0 principle and uses as much as possible open tools: the Leaflet map library and GeoJSON data format. Besides the ...

The main aim of this paper is influence of composition samples partially made from recycled silicon carbide on integrity of .products. Since the products are used in the foundry industry, it is necessary to achieve high wholeness and strength of the samples in order to avoid their disintegration during handling. Further restrictions are the requirements of the foundry on the limits of quantity of individual raw materials. Purpose of this research is using silicon carbide waste material and therefore minimalizes of...

This paper presents a novel control system design for the wind turbine model with PIC microcontroller power control system. The system uses Doubly Fed Induction Generator (DFIG) for wind power generation to generate electricity. For controlling power generation process the system applies microcontrollers PIC operating in multitasking mode. The proposed PIC controlled DFIG not only provides a low cost solution to today?s electric power needs, but also is aimed at delivering better power quality, making it ideally s...

The study of sediment transport in the coastal zone under the influence of waves and currents makes it possible to predict changes in the ecosystem of the coastal zone under various hydrometeorological conditions and anthropogenic influences. River runoff and abrasion processes are one of the main sources of solid matter entering the coastal zone, as well as one of the factors determining the changes in the granulometric composition of bottom sediments. Since the rivers of the Western Crimea are heavily regulated,...

In this paper we focused at the analysis of the possible use of biomass ash coming from wood chips combustion as pozzolanic admixture in mortar mix design. Biomass ash was characterized by XRF, SEM, and EDS analyses. The pozzolanic activity of the ash was tested using a modified Chapelle test. As the examined ash was pozzolana active, it was used as partial PC replacement in the composition of cement-based mortars. The PC replacing ratio was 10 and 15 wt. %. For the hardened mortar samples, bulk density, matrix de...

Annually natural resources are disappearing more and more, particularly it concerned forest resources. Furniture, houses, carpentry and etc. are made from wood. Scientists gradually try to find options for replacing forest resources, produce products from other materials, but forest areas are declining. every year. For conservation and rational forest usage, it is necessary to change needs for certain assortments and harvesting of natural wood in the future, and it will be achieved by forest consumption optimizati...

Woodworking hand tools have served as the basis for further development of the woodworking manufacturing. Even in nowadays woodworking hand tools are widely used in wood crafting. Besides they are used in manufacturing too, to complete some operations of wood technological processing without electrical hand tools and wood working machines. The aim of the research is to create structure scheme subdividing the woodworking cutting hand tools, which provides cutting as a main function of tool, in main and subgroups wi...

We propose a theme analysis method that takes into consideration the perspectives of both a supplier (place) and a consumer (user) in unstructured place reviews written by users. To this end, ambiance on the place side and companion and time on the user side were considered as the theme elements. For the experiment, we used the review text data written in English provided by Yelp, and we selected coffee-related places (e.g., coffee shop, coffee house, etc.) from various place categories. From among them, we chose ...

Zarechensk barite-polymetallic deposit is located in the northwest part of Ore Altai megatrough, which has long-lasting history of its development and complicated geological structure. Within the ore district, which is the northwest part of the devonian Zmeinogorsk-Bystrushinsky trough, ore mineralization is associated with the system of northwest border faults and cross branch faults. At these deposit four main stages and five phases of minerogenesis were determined. The first stage is the stage of oregenesis beg...

A specific feature of thermal power plants (TPP) is the multivariate nature of their intense technogenic impact on the environment, including pollution of air, environmental waters, soils, as well as disturbance of the geologic environment. Besides, TPPs cause thermal, radiation, noise and electromagnetic pollution; they also induce physical littering of the terrain and problems associated with storage of ash waste. Due to the reasons stated above, a comprehensive study of environmental damage zones caused by TPP ...

Hydrobiological monitoring of selected pools (alluvial oxbow) was carried in the K?ran?-Hrb??kovy t?n? Nature Reserve (Czech Republic) between 2015 and 2017. The pools represent a residual aquatic ecosystems of original inundation floodplain of the Elbe River, before river stream regulation. The regular samplings were performed every four weeks and more than one-year cycle was covered. Water quality parameters (temperature, conductivity, pH, dissolved oxygen and transparency were measured in the field. The level o...

Samples of ore for micromineralogical research were selected from the core of boreholes. The mineral composition of the ores, their textural and structural features were examined under an optical microscope in reflected and transmitted light, scanning electronic microscope (SEM) and energy dispersive X-ray spectrometer (EDS) with microanalyzer. Mineralization by its composition is sulfide. The nature of mineralization is imbedded. Phenocrysts are presented by separate idiomorphic grains of pyrite, aggregate interg...

There is a growing need for enhancing resilience of urban systems in the face of unprecedented urbanization and climate change for they both will likely worsen the already unstable and vulnerable nature of contemporary cities: once barely a risk, environmental factors have now the potential to become disasters. Urban resilience means that components of the urban system пїЅ be they natural, built or third environment, human capital, socio-economic activities, etc. пїЅ are able to withstand negative impacts without ...

The study was performed in order to establish the efficacy of the biological product пїЅNemagoldпїЅ in the control of root-knot nematodes (Meloidogyne spp.) on tomato crop under plastic tunnel conditions. Experiment was organized on tomato crop (cultivar пїЅPrekos F1пїЅ) strongly attached by root-knot nematode, located in south-east of Romania (Varasti-Giurgiu), during July-September 2016 period. Treatments were applied by drip irrigation during the second vegetation season. пїЅNemagoldпїЅ product having in compos...

There are many many historical buildings maintained in the world, whose construction, namely exterior wall, is made of solid masonry. These constructions have excellent thermal inertia, but also a range of humidity and thermo-technical problems. Finding a solution for these problems is a siginficant task, since most of the inner plaster is decorated with paintings, which are a cultural heritage. This paper deals with the solution to selected construction problems and their two dimensional simulation of the thermal...

The paper deals with the problematics of tracking of dynamic parameters in an enclosed space. Its focus is on temperature dynamics in three layers during a fire in the small-scale models. 3D outdoor fire modelling test has been made as the most realistic way of outdoor fire testing. Various phases of the fire, the temperature change related to the fire phase and various fuel sources are observed and analysed. The flashover phenomena was present as expected. Experiments and analyses of material flammability charact...

пїЅBody of groundwaterпїЅ means a distinct volume of groundwater within an aquifer or aquifers. This paper has as main objective creating a three-dimensional lithological model using borehole data for ROIL16 пїЅ Plain Vlasia groundwater body. RockWorks 15 is a software package for geological data management and visualization and it was chosen for analysing sub-surface data. The initial characterisation requires the collection of detailed information and data, such as geological and hydrogeological characteristics,...

For generalized inversion, non L2-norm inversions have been widely used in geophysical inversion to obtain sharp and blocky models. However, problems such as the boundary of anomaly body obtained by inversion is not clear enough and the recovered residual susceptibility value is far less than or greater than the true susceptibility generally exist. In this paper a new 3D magnetic inversion approach based on residual node susceptibility is proposed. The residual node susceptibility model comes from residual block s...

Carpathian Foredeep (CFD) is a mature Petroleum Province, where conventional biogenic gas has been produced since 1950s. At present the CFD is again object of petroleum prospecting, this time, as unconventional gas province. To improve resolution of this analysis, regional 3D structural model was constructed and divided into six main depositional complexes by developed on the basis of seismic data and geophysical logs interpretation. The model is located along the front of the Carpathians covering area ~4500 km2. ...

The purpose of this article is to describe the modern methods of making models of quarry using the latest technologies such as laser scanning, land and air photogrammetry using Unmanned Aerial Vehicles (UAV) and their subsequent use in the planning of technological processes in the quarry. The first part of the article is dedicated to the creation of models with a focus on data collection and processing, compatibility of each format, the very creation of the model as well as the possibility of using the created mo...

The design of personalized footwear insoles involves modelling the 3D shape of the insole based on the individual feet plantar surface shape and dimensions. The advantage of custom made insoles over the mass produced ones are represented by their enhanced functionality. Custom made insoles are recommended for subjects with various foot health disorders and for subjects who undertake intensive physical activities like athletes and soldiers. During human life time, under repetitive mechanical stress, feet suffers di...

This article discusses the possibilities of using a 3D printer with parallel kinematics that can produce good quality prototype components such as various covers, handles and functional assembly for simple electronic devices or robots. It will enable combining the printer with an engraving CNC machine, so that the effector head of the 3D printer will allow the head to be exchanged for printing with an engraver head, and it will allow fine engraving on printed circuit boards. The printer effector is equipped with a...

The main objective of this article will be focused into the possibilities of 3D printing paper machine called Mcor IRIS HD and also to subscribe the principles of this 3D printer in general. This machine is not well descripted yet; so the main idea is based on how this 3D paper printer works. Also, unlike the other 3D printing materials, this paper technology is not so well-known nowadays. There will be explained how the papers are spliced layer by layer on the building platform inside the 3D printer and the proce...

This paper presents an original approach on developing and testing an extruder for paste-like materials for conventional 3D printers based on Fused Deposition Modeling (FDM) technology. The main advantage of such technology is that it allows the final product to be modified / altered after fabrication i.e. either to correct printing irregularities or simply give it another design form. The material is fed into the extrusion nozzle via a plastic cylinder driven by an electric actuator. Various extruding nozzles wer...

The historical Benedictine Abbey, which comes from the 12th century, consists of a basilica, monastery buildings and underground cellars. The underground of abbey, which is commonly unavailable for tourists, is not only historically valuable exhibit but also reveals condition of the foundations of the buildings, which has been built on a limestone hill above the River Vistula. In order to obtain spatial information of the underground of the abbey, scientists have made laser scanning of cellars and corridors under ...

Computers have replaced peopleпїЅs work in various economy sectors for quite some time. Newer and newer technologies and software are designed to improve quality and safety. Precision and accuracy are the most important, both while looking for mineral depositsпїЅ documentation and during their exploitation in the future. Most geological works are performed using proven, classical methods. However, the development of computer science nowadays is huge. More and more mining operations are performed by means of comput...

This article presents the results of an integrated model for the Saban field which located in the Omar main fields at the eastern of Syria. The field is some 11 km by 3 km orientated in NW-SE direction with 33 wells drilled into three main reservoir blocks (Block 101, 102 and 103) developing the Rutbah cretaceous and Mulussa Triassic reservoirs. The field is in production since 1990. The purpose of this model is to guide future development well drilling to optimize reserves and extend field life. The input data in...

In late January of 2016 (27/01/2016) at Mining Section 14 (Block 7/10) of the Kukisvumchorr flank of the Kirovsk Mine (Khibiny), a violent seismo-dynamic event (lgE ? 8.11) took place to induce significant destructions and deformations of workings at Drill & haulage horizon 4 (4DHH) with an average elevation of +236 meter, 1DHH (+183 m), and possibly at 2DHH (+209 m), which is unavailable for examination. The dislocations, deformations and roof break formation occurred both at the cross-measure (predominantly) and...

In 2010, the municipality of Senigallia, located in Marche region (Italy), approved the Green Masterplan, drafted by the Department of Agricultural Sciences together with the Department of Territorial Planning of the Alma Mater Studiorum of Bologna, in collaboration with four architects, two agronomists, and few communal technicians, with the aim of granting a neat, homogeneous and sustainable development of the territory and improving the quality of life and the wellness of its inhabitants. Since then, many proje...

Soil erosion is one of the crucial forms of land degradation; a menace caused by soil degradation and prevailing lithological feature in southern Nigeria. Several hectares of land area and properties worth about 2.5 million USD are lost annually due to soil erosion. Besides arable lands, the vegetation which serves as habitat to several species is rapidly disappearing leading to the extinction of the native plant species. The objective of the study was to evaluate the impacts of soil-gully erosion from 1986-2016 b...

The authors of the paper compare the most important features of cadastral systems with respect to their information content included in the graphical part of the cadastre, i.e. on a cadastral map. The performed analysis covered selected countries, such as: Poland, Austria, Germany, Sweden, Norway, Finland, the Czech Republic, the Netherlands and Lithuania. Examples of cadastral maps from analysed countries are presented in the paper. Basing on performed analyses the authors prepared a list of the basic data which ...

The conversion of forest to pastoral and agricultural management has important implications for carbon storage in soils. The stationary conditions of Neamtu catchment is characterized by an altitudinal difference between 270 - 1523 meters, 418 sq. km surface area, with notable differences of morpho-lithological, climatic, hydrological and biogeographical conditions reflected in both soil diversity and carbon content differences. This study aimed at calculating and comparing the estimated soil carbon stocks in diff...

Of all geographically related health problems, pollen allergy is one of the most common allergic diseases of the respiratory tract. To support pollen allergy sufferers (including allergic rhinitis, conjunctivitis and asthma), a range of mobile applications are available for tracking pollen forecasting and recording symptoms. The geographic location of such records provides new opportunities for WebGIS pollen allergy monitoring. However, adding raw VGI data to a web map may produce more misinformation than benefits...

The impact of climate change on agricultural sector has grown in the last decades from local to macro-regional scales. Based on 14 indicators, a comprehensive image regarding the interrelationships between socioeconomic and climatic factors was obtained for characterizing the agricultural sector from Teleorman County, Romania during 6 years. An analysis of available time series was performed to obtain descriptive, associative, and comparative statistics of the data set. Pearson correlation was used to estimate the...

In order to bypass the big cities, the design of the motorways usually requires to choose the shortest route to reduce the travel times of vehicles. This leads to the construction of the road infrastructure and "works of art" over land areas that are insufficiently stable from a geotechnical point of view. In this context it is necessary to design and implement complex systems for monitoring the behavior of land surfaces and the buildings constructed on them. This article makes reference only to the geodesic and t...

The biogas obtained through processing of livestock residual waste (dung, manure and residual food), food production waste (fruit, vegetable, meat and dairy residues) and also effluents from industrial and municipal wastewater treatment plants can have a significant contribution in energy supplying and environmental protection. In order to determine the quality of this renewable fuel, it was developed a fast gas-chromatography method, through which it can be establish the calorific values, that have an important i...

The article deals with a basic economic image of the inland company Severo?eskпїЅ doly a.s. from 2010 until 2014. It is a company producing most brown coal in the Czech Republic. An economic insight into the company reveals important information for investors, but also for employees themselves, eventually it provides suppliers and customers with many useful data. The article presents basic economic indicators within a chosen period, their development and overall evaluation. It is indeed the economic analysis of th...

The surface water streams in the ore mining areas are subject to intense contamination with heavy metals and toxic elements. This type of pollution is a widespread problem nowadays. Detecting the geochemical patterns of the migration of heavy metals and toxic elements, together with their impact on natural environments, is a key aspect of ecological and geochemical research. This study is proposed in order to evaluate the state of the surface water streams in impact zones pertaining to the technogenic formations o...

Geo-electrical sections were constructed according to electrical resistivity tomography data on Shahtama tailings of Mo- ore processing plant (Transbaikal Kray, Russia), located in the permafrost zone. The capacity of technogenic deposits was determined and the zone of the fault was delineated. A wide range of electrical resistivities (ER) of mine tailings was revealed due to their different particle sizes, humidity and partially frozen condition. The statistical analysis of the distribution of resistivity of tech...

Vulnerability is an assessment of priorities for implementation in a city. It is imperative to determine vulnerable regions in the city to identify priority areas that may require immediate intervention. Nowadays, several methods used for national, international and local level vulnerability assessment are based on remote sensing and GIS technology. In this research aim to determine the vulnerability of Moscow city using a geospatial based vulnerability index for sustainable development of the city. We use urbaniz...

Building a telecommunications system based on routers allows you to use traffic prioritization to improve the quality of user traffic, regardless of network technology. This new feature, compared to networks built entirely on hubs, is a consequence of the fact that routers buffer packets before they are sent to another port. The router usually leads for each input and output port not one but several queues, each queue having its own processing priority. The efficiency of the network depends on the capacity of the ...