Browse

Water serves as a medium for fundamental process phases (e.g. tanning and dyeing) in leather production. The reduction of water consumption per product unit has been an environmental priority for European tanners over the years. This is possible mainly through the setting of continuous improvement objectives aiming at developing water efficient processes and water recycling technologies. The paper analyses the pickling operation, for bovine hides processing. The aim is to develop an automation system which will re...

The most important duties of the marine engines supervisors regarding to the operation of diesel marine engines is maintaining the serviceability of cylinder liners and piston rings of ship engines which includes extremely important process of running in piston rings an liners running after overhauling. During this process proper engine load to be maintained. and cylinder liners lubrication to be properly adjusted. This process can better monitored to avoid mistakes with procedures and can reduce cylinder lubricat...

The common fig tree (Ficus carica L.), is one of the oldest cultivated Mediterranean crop, is a useful genetic resource for commercial cultivation. The aim of this study was, the analysis of genetic diversity of the species Ficus carica from western Romania. Genetic diversity of fifteen fig-tree cultivars collected from three Romanian west regions were investigated using Inter Simple Sequence Repeat (ISSR) primers. Using a set of primers, the most informative ones were selected for their ability to generate ISSR p...

One of the species with the negative impact for corn crops in Europe is the coleopteran insect of Diabrotica virgifera virgifera (LeConte). The invasiveness but also the damage caused by adults can reduce the production of corn grain visible. By monitoring activities organized at local or national level (in Romania) often made confusion because coloristic variety intraspecific observed in insect populations. To identify the causes of color variability morphological studies were done on several samples present in d...

The study aimed to evaluate the variability of some morphological characters and the correlations between these at black pine. The biological material was represented by four populations of black pine, two of southwestern Romania (Herculane and Svinita) and two of central Greece (Kerasia Evia and Ano Polidrosos). The experimental data were collected by biometric measurements conducted "in situ" and were statistically processed in order to determine the variability within the populations, but also the correlation c...

The aim of this paper was to investigate the effect of defatted rapeseed flour addition from which proteins were extracted (DRF) on quality characteristics of bread as a finished product by baking test, rheological and microstructural examination. The dough rheological properties were determined by using the Alveograph device and its microstructure was analyzed by using the epifluorescence light microscopy (EFLM). Also, there were conducted analyses on the bread quality prepared from composite flour (wheat flour 6...

The Pectobacterium bacteria are classified among the most economically important pathogens for growing potatoes. In recent years, an increase in diseases caused by these bacteria could be observed. The purpose of this work is the study of the antibacterial activity in vitro of five plant extracts namely grains of black cumin (Nigella sativa L.), cloves (Syzygium aromaticum), Eucalyptus camaldulensis, wild carrot (Daucus carota L.) and thyme Numidia (Thymus numidicus), against the strain Pectobacterium collected in...

Urban areas face the problem of traffic congestion. City Centers are the destination of many people traveling to work, school or business every day. The spatial structure of a city is not fixed in space, but is subject to constant transformations associated with a vast array of social, economic and environmental processes. One of the processes that we can observe in Polish cities is the increasing number of parking spaces. In the urban planning of the development of large Polish cities, the trend of reducing car t...

The purpose of the study was to present detailed the stages in achieving the documentation necessary to upgrade the infrastructure of a road, after the landslides which led to the erosion of embankments. The chosen methodology consisted in designing and analyzing the topographical, geological, hydrographic, climatic studies and seismic classification of the area. Following the completion of basic works were proposed other works necessary to remedy the problem, conjunction with legislation to obtaining the Environm...

The removal of sulphate ions from different types of wastewater is an environmental challenge faced by several industrial sectors, such as the mining, petrochemical or metallurgical industry. Sulphates and heavy metals represent one of the main pollution sources is industrial effluents such as acid mine drainage (AMD) and other mining effluents. Manufacturing processes, primarily mining activities, often result in the production of effluents containing high amounts of inorganic pollutants e.g. heavy metals or sulp...

A mercury-cell chlor-alkali plant operated 50 years in KaпїЅtela Bay (situated in the middle of eastern Adriatic coast) near the town of Split. Even after 28 years the abundant cell house is still a hazardous source of the total gaseous mercury. Measured concentrations in the air (2.1 пїЅ 9.6 ?g m-3) could possibly present Hg-pollution of 9 km distant source of Jadro River. This source is used as a drinking water supply for the town of Split. The aim of the work was to find how far mercury is transported. Total me...

Pyrite is one of the main rock-forming components for Upper Jurassic-Lower Cretaceous black shale Bazhenov Formation. The correlation between pyrite and total organic carbon is found to be relatively high; however, some deficiencies of this hypothesis are discussed. Interlayers with high pyrite and low total carbon contents are encountered in the transition zone where the Bazhenov Fm. grades into Podachimov pack and into the underlying Georgiev Fm. The presence of pyrite in such layers is associated with the diage...

The article describes studies of the process of mineral raw refinement in dry, wet form and with addition of chemical reagents. Specific energy spent to refinement has been determined in the course of disintegration, as well as specific surface of particles before and after refinement has been measured. The values of refinement of inter-phase surface area of disintegrated mineral particles and values of specific surface energy have been calculated. With the help of performed studies one may obtain quantitative exp...

The paper aims to present the possibility of using surface water resource for irrigation in local arrangements in the West Plain of Romania. Irrigation is among the biggest consumers of freshwater worldwide and water demands for irrigation in Bega River basin are continuously increasing. On Bega River course, along with flood defense works, in the 1960 were also arranged water catchments with the role of using water in agriculture, even though most of arable land were arranged for drainage. To ensure the needed fl...

The most appropriate way to increase grip of bitumen with mineral materials is the use of adhesive additives which are slowing down the process of aging of bitumen due to oxidation and increasing durability of pavement. Adhesive properties of bitumen are important characteristics, as they are having a huge impact on operational properties of composite materials, such as asphalt mixtures. To understand the chemical behavior of the binder components interaction and improve adhesion to mineral components of asphalt c...

The current problem of the last decade in the world is the increase of oil production volume due to the extraction of its hard-to-recover reserves. The difficulty of its extraction is determined not only by the petro-physical characteristics of the oil-bearing formation, but also by the physico-chemical properties of the fluid itself. However, not all methods of enhancing oil recovery are ecologically safe. The most effective and ecologically-friendly method of soil purification from pollution by oil products is t...

The paper deals with the theoretical and practical analysis of the influence that the cutting direction of the bucket wheel excavator has on the digging forces acting on the wheel. Usually, when the terrace cut technology is applied, the bucket wheel of the excavator cuts vertical chips where mainly the perpendicular to stratification digging method is predominant. All the laboratory trials - done on the test rig - were conducted mainly for this type of vertical chip cutting. In cases when the drop cut method is a...

The paper presents the results of the analysis of the magnetoacoustics emission (MAE) signal properties of the meteorites of different genesis and various chemical composition. Magnetoacoustics emission method is characterized by a large number of informative parameters, and is associated with the restructuring of the domain structure. For instance, magnetic features of Fe-Ni alloys are related in part to the degree of defect structure. Chemical composition, structure and magnetic features of meteorites are relate...

The efficiency of bioscouring treatment applied on 50 % of flax + 50 % of cotton material by determination of the residual Ca2+ was studied. The treated samples were analyzed using a spectrophotometric method based on the measuring of the colour strength [K/S] of the bioscoured material after dyeing with Ruthenium red and Alizarin. The reflectance (R %) at 540 nm was measured and [K/S] values were calculated [1, 2]. The purpose of bioscouring was the removal of morphological impurities present in the cotton and fl...

The paper starts with the presentation of some general elements for characterizing, from morphological, geological, climatic, rainfalls and hydrographical point of view, a national road routing, highlighting the specific particularities which are concerning the study of the instability phenomena. Further on, are presented the types of instability phenomena present on the national road routing, including the general causes that produced them. The paper ends with the analysis of two case studies, considered as being...

One of the common applications of geosynthetics is their use as reinforcement for aggregate and soil layers. Geosynthetics improve the mechanical properties of the reinforced layers, which are originally, due to various reasons, insufficiently protected. Therefore, the use of geosynthetics allows for bearing heavier loads thanks to the soil-reinforcement system and an extended material durability. This article describes the laboratory tests of mechanical properties of a hexagonal geogrid made of polypropylene used...

Based on a real-life example, the report presents the methodology and the process of adapting in situ measurements from static CPTu probing for an application in a design process, using direct methods of driven pile capacity estimation. The report discusses two approaches. One of them is based on a real-life original CPTu measurement involving preliminary soil assessment while the other one is based on the initial averaging of the measurement values qc and fs. The paper provides methods of averaging cone resistanc...

The experience accumulated in Romania and worldwide by means of studies, design and control of the behaviour of many shallow foundations has rendered evident the existence of some soils, such as the loessial soils and the plastic clay fills, which are characterized by a high deformability, due to their sensitivity at wetting. One of the defining feature of these soils is their пїЅcontractancyпїЅ under the simultaneous action of compression and shear stresses. The macroporous soils, such as the loessial soils, have...

With the decrease of conventional oil production, the role of heavy hydrocarbons in the world energy balance will continue to increase in the near future. Heavy oil and natural bitumen as two of the alternative sources are perhaps the most readily available to meet short- and long-term needs. Intrastratal oxidation requires a formation temperature in the range of 250-350пїЅC, at which it is possible to achieve an in-situ oil upgrading through the low-temperature oxidation reactions of petroleum hydrocarbons. Usual...

The influence of ultrasound energy on bioscouring treatment applied on a 50 % of hemp + 50 % of cotton woven fabric was studied. The aim of the bioscouring treatment was the removal of the natural cellulose attendants for better fabric properties. The treatment conditions were: variable concentration between 1-3 % (o.w.f.) of the commercial enzyme product Beisol PRO, which is a mixture of pectinases from Bezema Company, Switzerland, 2 g/L of the complexing agent EDTA, 0.5 % of wetting agent Denimcol Wash RGN, phos...

Coal bottom ash (CBA) contains many elements that exist in different forms, which may change throughout the coal combustion process. This study presents the concentration and speciation of zinc in bottom ash of coal. Determination of total zinc was performed by two-stage microwave-acid digestion followed by ICP-OES. A sequential extraction process to speciation of zinc from coal bottom ash was investigated [1]. The definition of species is based on several different levels of atomic and molecular structure where c...

Background: Influenza A viruses continue to be the main cause of major epidemics, accompanied by high mortality. The vaccinal prevention for a number of reasons, such as the unpredictability of the molecular genetic and immunological characteristics of new epidemic and pandemic strains of influenza A virus, is not able to provide full protection of the population against viral infections. In addition due to the increasing resistance among influenza A viruses, the effectiveness of existing commercial antiviral drug...

In the production of electricity in the Thermal Power Plants, coal is one of the fuels. After burning coal, is resulting large amounts of waste in the form of slag and ash stored in ponds. After completing the submission of slag and ashes in ponds they have to rentered in the natural circuit. Soil of tailing ponds has a small grain size and is permeable, the structure of ponds are landscaped with irrigation systems and drainage water. Also soils have a low nutrient content and contain certain chemicals that could ...

The bakery industry has gone through a revolution in the last 150 years. Small handmade bakeries existing in almost every village are giving place to highly technologized bakery industry since it is considered that the bread made this way is more efficient. Productivity has become the key of success this period of time. New baking technologies have been developed to comply better with the new demands of the market. In the present context, the main goal of this paper was to investigate the impact of different bakin...

In food industry water is used as a raw material, as a solvent for substances with different density when washing products and equipment, as transport water or merely cooling water.Quality monitoring of the hygienic drinking water and the waste water discharged is one of the conditions requested for all producing, processing, storing, keeping, shipping and marketing product supply units. The increase in acquisition, application and development of knowledge, advanced services and techniques in the fields of environ...

Acoustic or phonic pollution is a type of noise pollution caused by noises, a complex of non-periodic sounds with random disagreeable insurgency that affects the psychological and biological state of human and animal organisms. The physical or objective characteristics of the noise are the strength or sound intensity (which depends on the features of the source, the distance and the possibilities of transmission or multiplication), duration and frequency. For the determination of the noise level, sound-meters, whi...

The major changes that have taken place over the last decade on the world food market reveal peopleпїЅs great interest in health and nutrition. The modern consumer is being warned about the major influences that the diet has on his health condition by the appropriate information accompanying the well-packaged product or by publicizing the risk of some diseases whose major cause is an unbalanced diet. Since there is great interest in providing bakery products with preservation by complying with the clean label stat...

Multicolored asian ladybird Harmonia axyridis Pall. is a well-known aphid predatory species, of Asian origin. The species is classified taxonomically, at present, in the tribe Coccinellini family Coccinellidae. The species is considerate bivoltine, but may submit up to 5 generations/ year. The main role of the species is its use in biological control. A negative impact on potential benefits that accompany this coccinellid would be predation insects native to the same family. Current status of invasive species is t...

In the western half of the Getic Subcarpathians, between Motru and Olte? is individualized one of the largest and unitary Carpathian depression areas, The Sub-Carpathian Depression of Oltenia.The Sub-Carpathian Depression of Oltenia, the sector between Olte? and Motru, is extended from East to West, for about 60 km, on an area of 130231 Ha.To the Mezorelief level, there are the following forms of landscapes: The groove of Internal Sub-Carpathian Depression, The Internal Carpathian Hills, The External Depression Gr...

Industry, pollute environments (air, water, soil), and bring damage to the health, both to the people and all living beings. In areas where oil and gas development is prevalent, air, water and soil resources can become contaminated with oil and gas wastes and by products. The pollutants emitted by the oil and gas industry, may bring damage immediate or long-term, to the environment. Mining industry and the oil processing, affects the environment through gaseous and liquid hydrocarbons. All products resulting from ...

The paper analyzes physicochemical properties of liquid products of waste tyre pyrolysis, and attempts to assess their usefulness as fuel for diesel engines. Every year, the number of produced vehicle tires increases at a very fast pace. Used tyres turn into waste that is difficult to manage simply because, according to relevant EU regulations, vehicle tires should be subject to recycling. To a large extent, the problem of waste tyres management may be resolved by their utilization through pyrolysis. The processin...

The noise of bandconveyors used in industry, according to the rules must be reduced below the maximum permissible areas where they are located. To reduce the level of noise pollution in the operation area on the bandconveyors can be used soundproufing panels. In order to not influence the placement of the panels of geographical conditions they can be placed directly on the metal structure of bandconveyors. Panels installed on bandconveyors to isolate sound can be damaged by vibrations arising in their structure. V...

The article presents results of using vibratory jaw crusher for feed preparing for the granulation process. The main aim of the study was to determine the possibility of preparing the limestone feed for non-pressurized granulation process by means of very fine crushing in the laboratory vibratory jaw crusher KW 40/1 with kinematic actuation of jaws. The crusher is characterized by high average degree of fragmentation (30-50). The study was conducted in two stages. The first stage included experiments with vibrator...

Jiu Valley represents one of the most important areas for coal mining in Romania, thus industrial development has generated a high level of health and safety at work issues. At work places in mining industry, the staff of the woodworking workshops is exposed to various concentrations of dust, possibly leading, in time, to occupational illnesses. Thus, wood processed in mining unitsпїЅ workshops is utilized for temporary support of coal faces, wrapping underground mining, insulation dams, ventilation doors, etc. Th...

Developing products modified structurally and functionally that ensure health benefits is relatively recent and is the result of accepting the idea that food plays an important role in the prevention and therapy of some health conditions; these arguments are at the basis of the appearance of пїЅfunctional foodsпїЅ with пїЅhealth benefitsпїЅ. Modification techniques of non hydrogenated palm oil lipids (simple mixing, hydrogenation, interesterification, fractionation) are no novelty since they are being optimised th...

This paper presents a study of the structural models convergence, rezulted from CAD (Computer Aided Design ), based on method of estimation. The study of the structural models convergence presented a method based on the convergence, in the sense of mathematical analysis, adapted to finite strings. The convergence estimators are status sizes that characterize the response of the structural model to the given load. As convergence estimators can be used sizes that characterize the response of the structure, like foll...

This paper presents the diversity of parasites species identified on cultured fish species, the degree of infestation and the epizootological state in nine fish farms (most of them producing fish fry for stocking other fish farms). These farms are located in five counties in the south of Romania (Arge?, DпїЅmbovi?a, Teleorman, Giurgiu and C?l?ra?i). A total of 653 fish were investigated. The fish species belong to two fish families namely Cyprinydae: Abramis brama, Cyprinus carpio, Carassius gibelio, Hypophthalmic...

Sea buckthorn (Hippophae rhamnoides L.) has gained worldwide researchers attention as a unique and valuable plant, primarily for its medicinal and nutritional potential. The berries can be capitalized by their processing in order to obtain derived alimentary products such as, e.g. juice and jam, as well as used for flavoring of dairy products. The dried sea buckthorn berries and leaves are used for tea. Lately, due to the fact that consumers are more open to information, so their level of awareness is higher, ther...

This paper aims to analyse the link between the hydraulic structures and the watercourse riverbed. In this regard the Epurasu branch has been chosen as a case study area. This is a secondary branch of the Lower Danube, located between the 341-334 kilometers of the Danube River. Epurasu branch is in an advanced state of silting/colmation, possibly due to the unfinished damming works, from the mid-80s of the last century. Thus, over the years, various solutions have been proposed to ensure the longitudinal connectiv...

This investigation is aimed to determine general development patterns of the natural and climatic situations and lakes of the boreal zone in the later and postglacial time in the southeastern periphery of the Fennoscandian crystalline shield since the time of the last deglaciation. The analysis of the subfossil Cladoceran community was carried out on the basis of the 23 samples of Lake GahkozeroпїЅ bottom sediments in the Republic of Karelia. In the subfossil Cladoceran community of the lake 42 taxa have been iden...

Prebiotics are one of most common components of functional food. Jerusalem artichoke tubers contain up to 20 % of inulin and oligofructose (OF) well known as probiotic substances. In agriculture Jerusalem artichoke (JA) has a number of advantages while it is used. It is zoned in temperate climates like the northern regions of China and Russia. Due to its acceptable organoleptic properties (sweetish taste without bitterness) compared with chicory (commonly used as source of probiotic), JA tubers can be used in func...

The solution of subsoil-structure interaction is affected by several factors as a choice of interaction model, influence of physical-nonlinear behaviour of structure and co-effects of the upper structure and the foundation structure. The subsoil-structure interaction can be solve by application of analytical methods or numerical methods - eg. Finite Element Method (FEM) or Boundary Element Method (BEM). FEM was used for numerical analysis performed in this article. Many different interaction models implemented in ...

The article considers mineralogical and technological features of ferruginous quartzites in the Zaimandrovsky regionпїЅs deposits and tailings from the rough magnetic separation. A technology has been developed for the stadial separation of magnetite concentrate from the initial ore, including the ore preparation, magnetic separation, and also the joint use of fine screening and magnetic gravity separation. The increase in the efficiency of the gravitational cycle for the hematite concentrate production was achiev...

The main reason for applying microclimate control in greenhouses is to achieve optimal growing environment. Because of its complexity, excessive control in greenhouses can adversely affect the cultivation of crops. Moreover, we have optimum control to achieve these challenging goals, including lower emissions and reduced production costs. The most important stage in the research of algorithms of management of technological objects is to develop a model of the object, which reflects the processes occurring in the o...

Based on lithological and geophysical logging data obtained from shallow and deep boreholes drilled in the Republic of Moldova, Ukraine and Romania, it has been possible to map out the distribution of Ediacaran deposits across the south-western part of the East-European Platform. The Ediacaran sedimentary strata extend throughout the studied territory. Complete sections generally have a thickness of between 400 and 500 m, with a monoclinal dip of less than 1пїЅ from north-east to south-west towards the Carpathian ...